http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
바이트 인선각의 변화에 따른 절삭성의 최적화 방안에 관한 연구
염성하,오재응,현청남 대한기계학회 1988 대한기계학회논문집 Vol.12 No.5
본 연구에서는 공구(bite)의 형상에서 상면경사각을 변화시켜 이에 따른 절삭 저항의 3분력을 측정하여 그 값에 대한 합력과 비절삭저항 그리고 거칠기 등 3값을 normalization 과정으로 energy method에 의하여 이들 SM20C 및 SM45C 재료를 구분하 여 각각의 절삭저항과 그 특성을 규명하고져 하였으며 아울러 재료별 최적조건을 찾고 자 한다. The optimum cutting condition of rake angle in turning was investigated in SM45C and SM20C. Results of experiments in SM45C and SM20C are as follow. Specific cutting resistance became higher as the depth of cutting, feed or cutting velocity decreases at same rake angle and resistance became low value at 20.deg.(SM45C), 10.deg.(SM20C). The optimum cutting condition for SM45C is depth of cutting 0.7mm, rake angle 30.deg., cutting velocity 200mm/min, feed 0.1mm/rev, and for SM20C is depth of cut 0.5mm, rake angle 10.deg., cutting velocity 150mm/min, feed 0.1mm/rev.The rake angle for good roughness is 15.deg for SM45C, and that for SM20C is 25.deg. The roughness is influenced by feed and it has the lowest value at 0.1mm/rev and the cutting condition is closely related with the change of cutting velocity and feed.
[論文] 공구 경사각의 변화에 따른 연질 재료 (Cu alloy and Al alloy) 의 절삭 특성에 관한 연구
염성하(S.H.Yum),현청남(C.N.Hyun),오재응(J.E.Oh) 한국자동차공학회 1988 오토저널 Vol.10 No.4
제품생산의 고정밀화 및 고품질화로 정밀 절삭가공에서 공구의 형상에 따라 많은 변수가 있으므로 공구의 상면 경사각을 변화시키면서 절삭저항, 비절삭저항, 거칠기 등을 energy mothod에 의하여 최적조건을 구한 결과(6-4)brass 에서는 경사각 20˚,25˚에서 Al alloy 에서는 0˚,20˚에서 가장 작게 나타났으며 거칠기는 (6-4)brass에서는 경사각 20˚에서 Alalloy 에서는 15˚에서 가장 작게 나타났다. The optimum cutting condition for rake angle in turning was investigated in (6-4) Brass and AIalloy. Results of experiments in (6-4) Brass and AI alloy are as follow.<br/> Specific cutting resistance becames higher as the depth of cutting, feed or cutting velocity decreases at same rake angle and resistance appear low value 20˚, 25˚ (6-4) brass, 0˚ 20˚(AI alloy).<br/> The optimum cutting condition for (6-4) Brass is depth of cutting O.5mm, rake angle 25˚, cutting velocity 80m/min, feed O.1mm/rev and for AI alloy is depth of cutting O.lmm, rakeangle 0˚, cutting velocity 200m/min, feed 0.5mm/rev.<br/> The rake angle for good roughness is 20˚ at (6-4) Brass, and that for AI alloy is I5˚.<br/> The roughness is influenced by feed and it has the lowest value at O.lmm/rev and the cutting condition is influenced by rake angle only.
A Study on the Quotient-Difference Algorithm by Facom 230 Digital Computer
Yum, Sung-Ha,Chang, Se-Hoon 漢陽大學校 1973 論文集 Vol.7 No.-
定數係數를 갖는 高次多項式의 根을 찾는 問題는 制御工學部門에서 매우 자주 나타나는 경우이다. 制御系에 대한 在來式 安定度判別法, 또는 傳達函數法에 의한 系統方程式의 極點, 零點들의 分布位置를 파악하는 問題, 혹은 逆 Laplace 變換時의 部分分數項으로 多項分數式을 展開할 때 等은 이러한 계산이 요구되는 좋은 본 보기이다. 여기서는 FACOM 230 小記憶容量 計算機를 사용하여, 좀 古典的인 方法이긴 하나, Quotient Difference Algorithm을 適用하여 이들 根을 찾을때의 計算結果의 精確度, 收儉速度를 檢討하고, 根으로의 收儉計算速度를 加速시킬 方案을 규명하여 보았다.
박천경,염성하,정재천,염영하 대한금속재료학회(대한금속학회) 1974 대한금속·재료학회지 Vol.12 No.3
最近 다이設計의 硏究는 補强 冷間鍛造用 金型과 더불어 活潑하게 進展되고 있다. 이 論文에서는 冷間鍛造用 金型의 材質로서 補强링에 스프링鋼을, 그리고 內部揷入 다이에 金型鋼(SKD-11)을 使用하였다. 强度計算에서 降伏條件은 最大剪斷應力을 使用한 "트례스카" 理論을 適用하고, 冷間鍛造用 金型에 對한 數値計算을 實施하였다. 金型의 强度에 미치는 影響, 補强링의 效果, 金型치수 및 熱收縮餘裕 等은 實驗을 通하여 觀察하였다. 스프링鋼은 適切한 熱處理를 하면 冷間鍛造用 補强링에 活用할 수 있다는 것을 本硏究에서 얻은 資料를 通하여 알게되었다. Recently, the study of die-design is actively developing with the reinforced cold forging dies. In this paper, the materials of the cold forging dies used spring steel in the reinforced-ring and die steel (SKD 11) in the insert. Yielding condition is based on Trasca's solution (max. shear stress) and carried out numerical calculation for the cold forging dies. Effect of the reinforced-ring, dies dimension and thermal shrinkage allowance observed the influence of the strength of dies through the experimental results. It is found that if spring steels are proper treated, it could be available for cold forging reinforced-ring from obtained data.
음향 인텐시터법을 이용한 테니스 라켓의 동특성에 관한 연구
오재응,이유엽,염성하 대한기계학회 1986 대한기계학회논문집 Vol.10 No.5
본 연구에서는 음향학적 고찰로써 최근 디지를 처리기술의 발달에 따른 근접 한 2점의 음압으로 부터 테니스 라켓의 공기입자속도를 근사적으로 구하기 위하여 두 개의 마이크로폰을 이용하여 계산된 음향인텐시티는 구물의 오무드 해석법에 의해 구 해진 테니스 라켓의 동적 특성과 비교 검토함으로써 진동과 음의 발생기구를 구명하고 측정계의 비접촉에 의한 테니스 라켓의 동적 거동을 규명하였다. The acoustic intensity in the very near field of a vibrating surface reveals information about the location of sound sources and sinks. A system model of tennis racket was developed from simultaneous measurement of excitation force, surface vibration and the near field sound pressure. The characteristics of structural dynamics were obtained by standard experimental modal analysis techniques while the sound radiation characteristics were determined by estimating the acoustic intensity. In this paper, the information about vibration behviour was obtained by acoustic intensity method and some, experiments for verification were carried out. Close correlation was found between experimentally determined acoustic intensity and vibration mode patterns of the tennis racket.