http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
부하 환류모드를 갖는 새로운 하프 브리지 공진형 인버터
연재을,조규민,김희준,Yeon Jae-Eul,Cho Kyu-Min,Kim Hee-Jun 대한전자공학회 2005 電子工學會論文誌-SC (System and control) Vol.42 No.3
본 논문에서는 새로운 하프브리지 공진형 인버터 토폴로지와 디지털 제어회로를 제안하였다. 제안된 인버터는 부하환류 모드를 제공함으로써 펄스폭 변조방식을 통해 출력을 제어할 수 있다. 따라서 부하측 고유 공진주파수를 추종하는 PWM 제어가 적용될 경우, 부하측 임피던스가 변화하는 조건하에서도 인버터 출력단의 변위율을 항상 1로 유지할 수 있다. 본 논문에서는 제안된 하프브리지 공진형 인버터의 동작원리와 전기적 특성 및 통상의 하프브리지 인버터와 비교한 손실해석에 대하여 고찰하였고, 제안된 알고리즘을 구현하기 위한 디지털 제어회로를 제시하였다. 또한 제안된 인버터의 유효성을 확인하기 위한 실험을 통해서 얻은 결과를 제시하였다. This paper proposes a new circuit topology of the half-bridge resonant inverter and presents its digital control scheme. As the proposed half-bridge inverter can be operated in the load-freewheeling modes, pulse width modulation (PWM) control method can be used for the output power control. The proposed half-bridge inverter can keep unity output displacement factor under the load-impedance varying conditions, if a new PWM control scheme based on the resonant frequency tracking algorithm is adopted. In this paper, the operation principle, electrical characteristics and detailed digital control scheme of the proposed half-bridge resonant inverter and loss analysis comparing with a conventional half bridge inverter is described. The experimental results of the proto-type experimental setup to verify the validity of the proposed half-bridge resonant inverter are presented and discussed.
연재을,조규민,김희준,Yeon Jae-Eul,Cho Kyu-Min,Kim Hee-Jun 대한전자공학회 2005 電子工學會論文誌-SC (System and control) Vol.42 No.3
유도방전을 이용한 무전극 램프는 전극을 필요로 하지 않기 때문에 긴 수명을 갖으며 안정기 출력의 변화에 대해서도 매우 강한 특성을 갖는다. 본 논문에서는 무전극 램프 조광제어를 위한 두 가지 새로운 알고리즘을 제안하였고 이를 적용한 공진형 인버터에 대하여 기술하였다. 제안된 두 가지 조광제어 알고리즘은 주로 LCD 백라이트의 조광제어에 적용되는 버스트 디밍 기법을 기초로 한다. 제안된 두 가지 방식중 하나는 개선된 버스트 디밍 기법으로 간단한 디지털 논리회로를 이용한 제어회로를 통해 $5\%$ 단위의 시비율로 조도조절이 가능한 방식이며, 나머지 하나는 버스트 PWM 평균 시비율 제어 기법으로 다소 복잡한 제어회로를 통해 $1\%$ 단위의 시비율로 조도조절이 가능한 방식이다. 본 논문에서는 100W급 무전극 램프를 대상으로 실시한 실험결과를 통해 제안된 조광제어 알고리즘의 유효성을 입증하였다. The electrodeless lamps using the induction discharge have a long lifetime and a high tolerance for the variable output conditions of a ballast since they don't need the electrodes. This paper proposed two novel dimming algorithms for the Electrodeless lamps and described the resonant inverter adopted the proposed methods. The proposed dimming algorithms are based on the conventional burst dimming method which is normally adopted for LCD back-lights. One of the proposed algorithms is a improved burst dimming method, which controls the illumination by duty ratio of $5\%$ and its control circuit is formed by simple digital logics. The other algorithm is a burst PWM average duty ratio control method, which controls the illumination by duty ratio of $1\%$ and its control circuit is formed by more complex digital logics than the first method. To verify the validity of the proposed dimming methods, a prototype experimental setup for 100W Electrodeless lamps is carried out and its results are presented in this paper.
연재을(Jae-Eul Yeon),조규민(Kyu-Min Cho),김희준(Hee-Jun Kim),이찬길(Chan-Kil Lee) 대한전기학회 2006 대한전기학회 학술대회 논문집 Vol.2006 No.7
This paper presents a remote dimming control method for the electrodeless lamps using 2.4 ㎓ RF communication. Since the proposed dimming method are implemented with a simplest open loop control using ISM band RF modem and low cost MCUs, and the remote controller has just several functions such as On/Off and duty ratio increasing/decreasing, It can be made with low cost. In this paper, the detailed digital logics of the proposed remote dimming control are described and the experimental results are presented.