RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        마이크로파 소성법으로 제조한 BNT-ST 세라믹스의 유전 및 압전 특성

        이상훈,김성현,에르키노프 파루크,Hoang Thien Khoi Nguyen,Trang An Duong,한형수,이재신 한국전기전자재료학회 2020 전기전자재료학회논문지 Vol.33 No.1

        This study investigated the microstructure and piezoelectric properties of lead-free 0.74(Bi1/2Na1/2)TiO3-0.26SrTiO3 (BNST26) piezoelectric ceramics sintered using a microwave furnace. For comparison, specimens were also prepared using a conventional furnace sintering (CFS). Average grain sizes of 2.4 μm and 3.2 μm were obtained in the sample sintered at 1,100℃ for 5 min using microwave sintering (MWS) and at 1,175℃ for 2 h using CFS, respectively. To quantify the changes in the microstructures and electrical properties according to the sintering conditions, the polarization hysteresis, bipolar and unipolar strain curves, and temperature dependence of permittivity were evaluated. As a result, it was determined that the Pmax (maximum polarization), Pr (remanent polarization) and Smax (maximum strain) values tend to increase with the average grain size. Based on these results, it is concluded that the MWS method can produce lead-free ceramics with superior performance in a relatively short time compared to the conventional CFS method. 본 연구에서는 마이크로파 소성법으로 제조한 0.74(Bi1/2Na1/2)TiO3-0.26SrTiO3 (BNST26) 무연 압전 세라믹스의 유전 및 압전 특성을 살펴보았다. BNST26 시료의 경우 일반 전기로 소성법의 경우 1175°C에서 2시간 동안 소결하면 충분한 치밀화가 진행되었으며 평균입도는 3.2 μm이었다. 반면에 마이크로파 소성법으로 제조한 경우 1100°C에서 5분간 소성하여도 충분히 치밀화가 진행되었으며 평균입도는 보다 작은 2.4 μm으로 나타났다. 특히 전계유기 변형 특성면에서 CFS 방법으로 제조한 시료의 경우 4 kV/mm의 전계 하에서 정규화 변형률이 509.5 pm/V를 나타내었고, MWS 방법으로 1100°C에서 5분간 소결하여 제조한 시료는 491.7 pm/V를 나타내어 대등한 수준의 특성을 보였다.

      • KCI등재

        Eff ect of SrTiO 3 modifi cation on dielectric, phase transition and piezoelectric properties of lead-free Bi 0.5 Na 0.5 TiO 3 CaTiO 3 SrTiO 3 piezoelectric ceramics

        Hoang Thien Khoi Nguyen,Trang An Duong,에르키노프 파루크,강형원,Byeong-Woo Kim,안창원,한형수,JAE SHIN LEE 한국세라믹학회 2020 한국세라믹학회지 Vol.57 No.5

        This study investigated the structures, dielectric, ferroelectric and piezoeletric properties of lead-free (0.99 x ) Bi 0.5 Na 0.5 TiO 3 0.01CaTiO 3 x SrTiO 3 (BNT CT 100 x ST, x = 0.22–0.30) piezoelectric ceramics. These piezoceramics were successfully prepared using the conventional solid-state reaction method sintered at 1175 °C for 2 h. It was found that a phase transition from nonergodic relaxor to ergodic relaxor was induced by ST modifi cation in BNT CT ceramics. Consequently, a large electromechanical strain of 0.20% corresponding to high normalized strain d∗ 33 of 667 pm/V was obtained even under 3 kV/mm for BNT CT 28ST ceramics. Therefore, it is noted that lead-free BNT CT 100 x ST ceramics can be promising candidates for actuator applications.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼