http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
진치섭,엄장섭,Jin, Chi Sub,Eom, Jang Sub 대한토목학회 1993 대한토목학회논문집 Vol.13 No.5
본 논문에서는 콘크리트 균열 사이의 인장강성 효과를 고려한 임의의 기하하적 형상을 갖는 철근 콘크리트 쉘을 해석하기 위하여 재료비선형 유한요소 프로그램을 작성하였다. 본 논문은 연속적인 컴퓨터 해석으로 탄성, 비탄성 및 극한 범위에서의 철근과 콘크리트의 응력은 물론, 하중-변위 응답과 균열전파를 추적할 수 있었다. 골재억물림과 철근의 다울작용을 포함하는 유효전단계수를 평가하기 위하여 균열상태의 전단유지계수를 도입하였다. 콘크리트는 인장에서는 취성으로 압축에서는 탄소성으로 가정하였다. 콘크리트의 소성거동은 Drucker-Prager 항복기준과 결합유동법칙에 따르는 것으로 가정하였다. 철근은 Von Mises 항복기준으로 가정하였으며 등가의 두께를 가지는 철근층으로 모델화 하였다. 수치해석을 위하여는 증분형접선강성도 방법을 사용하였다. 수치예제를 제시하여 본 연구결과를 Hedgren의 실험 결과와 Lin의 수치해석과 비교하였다. In this study, material nonlinear finite element program is developed to analyze reinforced concrete shell of arbitrary geometry considering tension stiffening effects. This study is capable of tracing the load-deformation response and crack propagation, as well as determining the internal concrete and steel stresses through the elastic, inelastic and ultimate ranges in one continuous computer analysis. The cracked shear retention factor is introduced to estimate the effective shear modulus including aggregate interlock and dowel action. The concrete is assumed to be brittle in tension and elasto-plastic in compression. The Drucker-Prager yield criterion and the associated flow rule are adopted to govern the plastic behavior of the concrete. The reinforcing bars are considered as a steel layer of equivalent thickness. A layered isoparametric flat finite element considering the coupling effect between the in-plane and the bending action was developed. Mindlin plate theory taking account of transverse shear deformation was used. An incremental tangential stiffness method is used to obtain a numerical solution. Numerical examples about reinforced concrete shell are presented. Validity of this method is studied by comparing with the experimential results of Hedgren and the numerical analysis of Lin.
진치섭,이승훈,엄장섭,배상현 釜山大學校生産技術硏究所 2006 生産技術硏究所論文集 Vol.65 No.-
본 연구에서는 사각(900°~450°) RC 라벤교를 2차원 보해석과 3차원 판해석으로 해석하였다. 연구 결과로부터 다음과 같은 결론을 얻었다. 슬래브 지점부의 단면력 집중에 따라,3차원 판해석에 의한 단면력은 2차원 보해석의 단면력보다 1.015~1.830배 크게 나타났다. 따라서 슬래브 지점부의 철근 보강 영역은 경사폭의 0.11~0.30배로 나타났다. 슬래브 최대 정모멘트 발생각과 라멘교 사각과의 상관관계를 살펴보면, 라벤교 사각 900° ~45°에 대하여 최대 정모벤트 발생각은 93° ~ 51°로 나타났다. 따라서 라벤교의 주인장 철근 이음장 위치는 최대 정모맨트 발생 구역 밖에들도록 해야한다.
진치섭,전쌍순,엄장섭 釜山大學校生産技術硏究所 2005 生産技術硏究所論文集 Vol.64 No.-
본 연구에서는 모르타르 바 시험방법 중 ASTM C 227과 STM C 1260을 선택하여 암석 유형별로 수집한 12종의 골재들을 대상으로 쇄석 골재의 반응성을 비교l 분석하였다. 또한, 반응성 골재로 판정된 쇄석 골재를 사용하여 현재 문제되고 있는 알칼리-실리카 반응에 있어서 플라이애쉬,고로슬래그미분말,실리카품 및 메타카올린을 흔화재료로 사용할 경우 알칼리-실리카 반응에 미치는 영향을 알아보고자 시멘트에 대한 혼화재의 치환율을 달리하여 ASTM C 1260 시험법으로 알칼리-실리카 반웅에 대한 팽창 저감효과를 평가하여 보았다. 그리고 본 연구에서는 혼화재 치환에 따른 모르타르 유동성과 합축강도 시험도 병행하였다. 혼화재의 치환율은 0, 5, 10, 15, 25 및 35% 로 하였으며,어느 정도의 유동성을 갖는 혼화재는 45, 55% 까지 치환율을 증가하여 모르타르 바 시험을 수행하였다. 시벤트 중량에 대한 혼화재의 치환율이 플라이애쉬는 25%, 고로슬래그미분말은 35%, 실리카품은 10%, 메타카올린은 25% 일 경우 알칼리-실리차 반응에 의한 팽창 저감에 효과적인 것으로 판단된다.
양압력을 고려한 중력식 콘크리트 댐에 대한 LEFM 해석
진치섭,이영호,엄장섭,김태완 부산대학교 생산기술연구소 2000 生産技術硏究所論文集 Vol.59 No.-
댐 제체와 지반 접촉 경계면 사이에 작용하는 양압력의 모델링은 중력식 콘크리트 댐의 해석시 중요하게 고려된다. 본 연구에서는 양압력의 작용에 따른 중력식 콘크리트 댐의 균열선단 부근의 음력확대계수를 표면적분법을 이용하여 계산하였다. 또한 자중, 월류수압 및 균열면에 작용하는 수압도 함께 고려 하였다. The modeling on uplift pressure on the foundation of a dam on which it was constructed, and on the interface between the dam and foundation is a critical aspect in the analysis of concrete gavity dams. The evaluation of stress intensity factor at the crack tip of concrete gravity dam due to uplift pressure effect by surface integral method is performed in this study. The effects of borty force, overtopping pressure and water pressure on the crack-face are also considered in this study.