http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Reverse Engineering을 이용한 석션 하우징의 음장해석
양정직(Jeong-Jik Yang),이동주(Dong-Ju Lee) 한국생산제조학회 2011 한국생산제조학회지 Vol.20 No.4
We tried to analyze sound field of the interior of housing installed with an impeller using the Boundary Element Method (BEM) with the Kirchhoff-Helmholtz integral equation. In order to increase the accuracy of our analysis, reverse engineering technology, which has been developed in recent years. We measured and treated geometrical data with 3D scanning of the practical research object. After modeling by the reverse engineering, we analyzed variation of the BPF as adding vibration frequency and variation of the sound field of the interior of housing by changing the number of impeller blades. We also tried an analysis of free degree variation. Then, we proposed the analysis accuracy and noise reducing method by analysis result.
양정직(Yang, Jeong-Jik),이동주(Lee, Dong-Ju) 한국소음진동공학회 2010 한국소음진동공학회 논문집 Vol.20 No.11
The relation between the vibration induced from machinery and the radiated sound is complicated. Acoustic intensity method is widely used to obtain the accuracy of noise measurement and noise identification. In this study, as groundwork, the complex acoustic intensity method is performed to identify noise source and transmission path on different free space point source fields. As an industrial application, the complex acoustic intensity method is applied to HVAC to identify sound radiation characteristics in the near field. Experimental complex acoustic intensity method was applied to HVAC, it is possible to identify noise sources in complicated sound field characteristics which noise sources are related with each other, and certificate the validity of complex acoustic intensity. Especially, it can be seen that complex acoustic intensity method using both of active and reactive intensity is vital in devising a strategy for identification of noise. Also, the vector flow of acoustic intensity was investigated to identify sound intensity distributions and energy flow in the near field of HVAC.
사형 주조 3D 프린팅용 소재의 기계적 특성 및 신뢰성
손현진,장성완,이환종,양정직,정영근,배창준,Son, Hyeon Jin,Jang, Seongwan,Lee, Hwan Jong,Yang, Jeong Jik,Jeong, Yeong Geun,Bae, Chang-Jun 한국재료학회 2020 한국재료학회지 Vol.30 No.1
Sand casting 3D printing uses a binder jetting method to produce a mold having complicated shape by spraying a binder on sand coated with activator. Appropriate heat treatment process in sand mold fabrication can increase the degree of polymerization to improve flexural strength. However, long heat treatment of over 24 hours decreases flexural strength and reliability due to chemical bond decomposition through thermal degradation. The main role of the activator is to control the reaction rate between the polymer chains. As a result, when the activator composition is increased from 0.15 wt% to 0.25 wt%, the flexural strength is increased by 218 N/㎠. However, excess activator (0.40 wt%) has been shown to decrease reliability without increasing flexural strength. The main role of the binder is to control the flexural strength of the specimen. As the binder composition is increased from 2.00 wt% to 4.00 wt%, the flexural strength increases to about 255 N/㎠, indicating the maximum flexural strength increase. Finally, the reliability of the flexural strength of the fabricated specimens is evaluated by a Weibull plot. Weibull modulus calculations are used to evaluate the flexural strength reliability of the specimens, and maximum reliability value of 11.7 is obtained at 0.20 wt% activator composition. Therefore, it is confirmed that this composition has maximum flexural strength reliability.
서지원(Ji-Won Seo),양정직(Jeong-Jik Yang),김진호(Jin-Ho Kim),임종완(Jong-Wan Lim) 한국가스학회 2017 한국가스학회지 Vol.21 No.3
국내 CNG Bi-fuel Kit를 개조한 차량들은 대부분 Diaphragm 감압방식을 적용한 기계식 레귤레이터를 장착하여 운행 중에 있다. 하지만 Diaphragm의 재질 특성 및 기계식 압력제어 방식의 특성 상 다양한 문제점들이 발생되고 있으며, 이를 개선하기 위한 연구들이 진행되고 있다. 본 연구에서는 CNG 차량용 레귤레이터의 압력제어방식에 따른 성능특성 확인 및 비교 분석 진행을 통해 개선방안을 도출하고자 하였다. 실험 결과에 따르면 Diaphragm을 적용한 감압방식이 Piston을 적용한 방식보다 일반적인 성능에서 유리하였으나 주변 온도환경 변화에 따른 변동 폭이 큰 것을 확인하였다. 또한 전자식 압력제어를 통해 레귤레이터의 일반적인 성능을 향상시킬 수 있음을 확인하였다. The domestic vehicles remodeling the “CNG Bi-fuel Kit” are mostly in operation with installing the mechanical regulator applying the Diaphragm. However, due to the material characteristics of Diaphragm and characteristics of mechanical pressure control method, various problems are happening. This study tries to deduce the improvement plan through the checking of performance characteristics according to the pressure control method of CNG regulator and progress of comparative analysis. According to the test result, the decompression method applying the Diaphragm has advantage compared to the method applying the Piston. Furthermore, it was confirmed that through the electronic pressure control, it is possible to improve the general performance of the regulator.
주변 온도환경 변화에 따른 가스 인젝터 성능 변화에 대한 연구
김지윤(Ji-Yoon Kim),양정직(Jeong-Jik Yang),김진호(Jin-Ho Kim),서지원(Ii-Won Seo),임종완(Jong-Wan Lim) 한국가스학회 2018 한국가스학회지 Vol.22 No.5
본 연구에서는 CNG자동차 인젝터의 외부 환경온도에 따른 인젝터의 분사량을 분석하고자 한다. 특히 냉간시동시와 같은 조건에서 분사량의 변화를 측정하여 저온환경이 가스인젝터 성능에 미치는 영향을 파악하고자하며, 가스 인젝터 내부의 스프링 특성을 다르게 하여 실험을 진행 하였다. 실험 장치는 연료 공급부, 유량 측정부, 온도 챔버와 인젝터 제어부로 구성하였다. 실험결과를 통해 저온환경일수록 가스인젝터의 초기 분사량이 증가하였으며, 스프링길이 증가에 따른 니들의 열리는 시간(무효분사시간)이 지연됨을 확인하였다. This study tries to analyze the injection amount of injector according to the external environment temperature of CNG vehicle. Especially, We investigated the effect of low temperature environment on gas injector performance by measuring the variation of injection amount under the same conditions as in coldstart condition. This experimental compared two products with different spring characteristics. The experimental device consist of a fuel supply unit, a flowrate measurement unit, a temperature chamber, and an injector control unit (ECU). According to the test result, the initial injection amount of the injector is increased in the low temperature environment and the needle opening time is delayed according to the change of the spring length.