http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
공동주택 단지의 실내 공기질 향상을 위한 수치 해석적 연구
신미수(Mi Soo Shin),김혜숙(Hey Suk Kim),홍지은(Ji Eun Hong),장동순(Dong Soon Jang) 大韓環境工學會 2009 대한환경공학회지 Vol.31 No.7
본 연구에서는 대전의 대규모 공동주택단지의 하나인 대덕테크노 밸리의 계절별 주풍향 및 풍속, 건물배치, 환기구 위치 등 다양한 외부 유동 변수에 따른 실내 환기 특성을 수치 해석적 방법을 활용하여 연구함으로써 실내 공기질 향상에 일조하기 위해 연구를 수행하였다. 계절별 주풍향은 여름과 겨울에 큰 차이를 나타냈는데, 여름철의 경우 주풍향은 남풍이며, 겨울철의 경우 주풍향은 10년 평균 주풍향과 동일한 북북서풍으로 나타났다. 풍향이 변화함에 따라 최대 압력차가 나타나는 단지도 변화하였으며 그에 따라 환기에도 차이를 나타냈다. 내부 환기량은 환기 우수지역의 경우는 자연환기만으로 기준치인 시간당 0.7ACH를 만족하였으나 환기 취약지역의 경우는 자연환기만으로는 기준치를 만족시키지 못하여 부수적으로 기계 환기를 병행해야 하는 것으로 나타났다. 이러한 외부유동 변화에 따른 내부 환기량의 연구결과를 바탕으로 향후 아파트의 배치나 환기구 위치 선정에 응용한다면 환기량 확보에 일조하여 기계환기에만 의존하지 않고 자연환기와 병행이 가능하므로 에너지 절감에 도움이 될 것으로 판단된다. This study has been made to execute a research in order to lead the improvement of indoor air quality, examining the indoor ventilation characteristics by using a numerical analysis method. To this end an extensive parametric investigation are made according to various external flow variables such as main wind direction and wind speed by season, building layout design, and location of ventilators, etc. in Daedeok Techno Valley, one of large-scaled apartment in Daejeon. It is observed there was a significant difference of main wind direction between summer and winter. The main wind direction in summer was a south wind, and on the contrary the direction in winter is northnorthwest, which is similar to the average main wind direction for 10 years. One of the important calculation results is that the change of wind direction causes a significant effect on the apartment ventilation by the change of pressure difference around each complex of apartment. In case of favorable area of ventilation, the indoor ventilation rate can meet 0.7 ACH from the standard value only with natural ventilation. On the contrary, in other area the value was much lower than the standard value. If the calculation result applies to the design of layout apartment or placement of ventilators, it will be greatly helpful to the energy saving because it can be parallel with the natural ventilation to help securing ventilation rate, not much depending on the mechanical ventilation.
신미수(Mi Soo Shin),김혜숙(Hey Suk Kim),장동순(Dong Soon Jang) 大韓環境工學會 2009 대한환경공학회지 Vol.31 No.11
고효율 싸이클론의 설계는 압력강하의 최소화와 집진효율의 최대화를 이루는 것이 중요하다. 본 연구는 고온, 고압 조건하에서 신뢰성 있는 컴퓨터 프로그램을 개발하여 싸이클론의 집진효율에 영향을 주는 물리적 메카니즘을 연구하는 것이다. 수치 해석적 연구를 통한 고온, 고압 조건에서의 압력강하 계산은 실험데이터와 비교적 잘 일치하였다. 온도와 압력은 일반적으로 집진효율에 중요한 영향을 미치는데 보통 항력에서 가스의 밀도나 점도 등에 영향을 주어 서로 상반되는 결과를 나타낸다. 그러므로 고온 운전에 따른 집진효율의 감소는 고압 조건으로 운전하는 것이 대안이 될 것으로 판단된다. 집진효율에 영향을 주는 인자에 대해 좀 더 세부적인 연구를 위하여 접선방향 속도나 보텍스 파인더의 직경 등과 같은 싸이클론의 설계변수나 운전변수에 따른 연구를 수행하였다. 예상한 바와 같이 접선방향의 속도가 집진효율에 가장 큰 영향을 주었다. 그리고 보텍스 파인더의 직경이 증가할수록 집진효율은 감소하였으며 보텍스 파인더의 길이는 집진효율에 큰 영향을 나타내지 않았다. One thing to note in cyclone operation and design is to minimize the pressure drop with the enhancement of the efficiency of dust collection. This can be facilitated by the detailed resolution of complex fluid flow occurring inside a cyclone. To this end, the main objective of this study was to obtain the detailed fluid dynamics by the development of a reliable computation method and thereby to figure out the physics of dust collection mechanism for more extreme environment caused by high temperature and pressure condition. First of all, the computer program developed was evaluated against experimental result. That is, the numerical calculation predicts well the data of experimental pressure drop as a function of flow rate for the elevated pressure and temperature condition employed in this study. The increase of pressure and temperature generally affects significantly the collection efficiency of fine particle but the effect of pressure and temperature appears contrary each other. Therefore, the decrease of collection efficiency caused by the high operating temperature mainly due to the decrease of gaseous density can be remedied by increase of operating pressure. After the evaluation of the program, a series of parametric investigations are performed in terms of major cyclone design or operating parameters such as tangential velocity and vortex finder diameter for dusts of a certain range of particle diameters, etc. As expected, tangential velocity plays the most important effect on the collection efficiency. And the efficiency was not affected significantly by the change of the length of vortex finder but the diameter of vortex finder plays an important role for the enhancement of collection efficiency.
신미수(Mi-Soo Shin),장동순(Dongsoon Jang),이용국(Yongguk Lee) 대한환경공학회 2016 대한환경공학회지 Vol.38 No.12
분리막의 제조에 있어서 높은 분리도와 투과도가 요구되지만 투과도와 분리도는 반비례하는 경향이 있으므로 현실적으로 가능하지 않다. CO₂ 포집의 비용절감 측면에서 살펴보면 분리막의 재질 자체보다는 투과도와 분리도가 분리막의 모듈이나 시스템의 성능이 미치는 영향이 더 중요하다고 할 수 있다. 예로 들어 CO₂ 13%와 N₂ 87%인 혼합기체를 분리도를 5로 고정시킨 후 유량의 10%가 분리막을 통하여 투과된다고 가정하면 투과한 10% 중에 CO₂ 4.28%, N₂가 5.72%로서 투과한 기체중 이산화탄소의 농도가 42.8%가 된다. 이 경우 이산화탄소의 순도는 42.8%이며 첫 번째 투과에 의해 얻은 이산화탄소의 회수량은 4.28/13 = 32.9%가 된다. 만일 투과도와 분리도를 두배로 증가시킬 경우 이산화탄소의 순도는 64.5%, 이산화탄소 회수량은 12.9/13 = 99.2%로 나타났다. 이 경우 대부분의 CO₂가 회수되었으며 이것이 의미하는 바는 주입된 이산화탄소가 투과되지 않고 그대로 통과하여 빠져나가는 양은 거의 제로에 가까운 경우로서 이산화탄소 분리에는 이상적인 설계나 운전조건이라 할 수 있다. 일정한 주입농도에서 주어진 투과도에 대하여 이산화탄소를 100% 회수하는 임계 분리도가 존재함을 알 수 있으며, 임계 분리도 이상 높아질 경우 이산화탄소 회수되는 양이나 순도 향상에 별다른 영향이 없음을 시사하고 있다. 이상의 결과에서 주어진 이산화탄소의 농도에 대해서 분리막을 이용한 분리에서 이산화탄소를 100% 투과시키는 임계 투과도와 분리도가 설계와 운전조건의 최적화를 위하여 절대적으로 중요함을 알 수 있다. Manufacturing membrane materials with high selectivity and permeability is quite desirable but practically not possible, since the permeability and selectivity are usually inversely proportional. From the viewpoint of reducing the cost of CO₂ capture, module performance is even more important than the performance of membrane materials itself, which is affected by the permeance of the membrane (P, stagecut) and selectivity (S). As a typical example, when the mixture with a composition of 13% CO₂ and 87% of N₂ is fed into the module with 10% stage cut and selectivity 5, in the 10 parts of the permeate, CO₂ represents 4.28 parts and N₂ represents 5.72 parts. In this case, the CO₂ concentration in the permeate is 42.8% and the recovery rate of CO₂ in this first separation appears as 4.28/13 = 32.9%. When permeance and selectivity are doubled, however, from 10% to 20% and from 5 to 10, respectively, the CO₂ concentration in the permeant becomes 64.5% and the recovery rate is 12.9/13 = 99.2%. Since in this case, most of the CO₂ is separated, this may be the ideal condition. For a given feed concentration, the CO₂ concentration in the separated gas decreases if permeance is larger than the threshold value for complete recovery at a given selectivity. Conversely, for a given permeance, increasing the selectivity over the threshold value does not improve the process further. For a given initial feed gas concentration, if permeance or selectivity is larger than that required for the complete separation of CO₂, the process becomes less efficient. From all these considerations, we can see that there exists an optimum design for a given set of conditions.