http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
파랑과 정사각형 배열의 원형 기둥 구조물의 상호작용 수치해석
송성진,박선호,Song, Seongjin,Park, Sunho 해양환경안전학회 2017 海洋環境安全學會誌 Vol.23 No.5
Accurate prediction of wave-structure interactions is important in the safety and design cost effectiveness of fixed and floating offshore structures exposed to extreme environmental conditions. In this study, regular waves and circular column structure interactions for four circular columns in regular waves are analyzed. To simulate 3D two-phase flow, open source computational fluid dynamics libraries, called OpenFOAM, were used. When the four circular columns are arranged in a square array, the interactions according to the incident slopes of the regular waves are analyzed. The wave run-up in the circular column surface was compared according to the slope of the incident wave. It was confirmed that high amplitude waves are generated between the circular columns due to the interaction between the circular column and the incident wave. It is expected that this analytical result will be used as the basic data of the study on the air gap due to the interaction between the structure and incident wave. 해양환경의 극한 환경조건에 노출 된 고정식 및 부유식 해양구조물의 안전성과 설계비용 효율성에 있어서 파랑-구조물 상호작용의 정확한 예측은 중요하다. 본 연구에서는 규칙파 중 원형 기둥에 대한 파랑-구조물 상호작용을 해석하였다. 3차원 이상유동(two-phase flow)을 해석하기 위해 오픈소스 전산유체역학 라이브러리인 오픈폼을 사용하였다. 4개의 원형기둥이 정사각형 배열을 이루고 있을 때 규칙파의 입사각도에 따른 상호작용을 해석하였다. 원형 기둥 구조물에서의 wave run-up을 입사파의 기울기에 따라 비교하였다. 원형 기둥과 입사파의 상호작용으로 인해 원형 기둥 사이에 높은 파가 생성되는 것을 확인하였다. 본 해석 결과는 구조물과 입사파의 상호작용에 의한 air gap에 대한 연구의 기초자료로 활용될 것으로 기대된다.
후방복사된 초음파를 이용한 터빈 블레이드 재료의 부식 열화특성 평가
송성진,김영환,배동호,정민호,권성덕,Song, Sung-Jin,Kim, Young-H.,Bae, Dong-Ho,Jung, Min-Ho,Kwon, Sung-Duk 대한기계학회 2002 大韓機械學會論文集A Vol.26 No.11
The corrosion degradation characteristics of the 12Cr alloy steel, which is widely used in fossil power plants as a turbine blade material, are evaluated nondestructively by use of the backward radiated Rayleigh surface wave. In order to evaluate corrosion degradation characteristics, we constructed automated system for the backward radiation, and the frequency dependency of the Rayleigh surface wave is investigated indirectly by measuring the angular dependency of the backward radiation of the incident ultrasonic wave in the specimens. The velocity of the surface wave decrease as the increase of the aging time in the backward radiation profile, which seems to result from the increase of the effective degrading layer thickness. And, amplitude of the surface wave increase as the aging time, which seems to result from the increase of the intergranular corrosion. The result observed in this study demonstrates high potential of the backward radiated ultrasound as a tool for the nondestructive evaluation of the corrosion degradation characteristics of the aged materials.
모듈생성기를 이용한 데이타경로 컴파일러의 설계 및 구현
송성진(Sung Jin Song),주남수(Nam Soo Joo),권오영(Oh Young Kwon),한탁돈(Tack Don Han) 한국정보과학회 1993 정보과학회논문지 Vol.20 No.11
최근 반도체 제조 기술의 발전에 따라, 시스템을 효과적으로 설계하기 위한 설계 자동화 시스템에 관한 많은 연구가 이루어지고 있다. 본 논문에서는 효율적인 셀 설계, 배치 및 배선 알고리즘을 이용하여 시스템 설계에서 많은 비중을 차지하고 있는 데이타패스 부분을 설계한다. 이를 위해 데이타패스 컴파일러를 설계하였고, 컴파일러에 사용될 여러가지 기능블럭들을 모듈생성기로 구현하였다. According to the advancement of semiconductor fabrication technology, studies on a silicon compiler that helps efficient system design are in progress. In this paper, we used effective cell design, module placement and routing algorithms for datapath construction. For these algorithms we designed various module generators as functional building blocks and implemented a datapath compiler.
송성진(Sung-Jin Song),주남수(Nam-Soo Joo),권오영(O-Young Kwon),한탁돈(Tack-Don Han) 한국정보과학회 1992 한국정보과학회 학술발표논문집 Vol.19 No.2
본 연구에서는 domino-CMOS 회로를 이용하여, 임의의 비트에 대한 양방향의 쉬프트 기능을 수행 할 수 있는 데이타패스용 배럴 쉬프트 모듈생성기(Barrel Shifter Module Generator)를 설계하였다. 설계된 N-비트 쉬프터에서 쉬프트 단계의 수는 [log2N]¹)이 되며, 설계된 배렬 쉬프터는 마스크(mask)를 위한 별도의 단계(stage)가 필요 없이 각 쉬프트 단계에서 마스크 값을 생성하기 때문에 기존의 쉬프트 구현 방법에 비해 면적과 속도에서 효율적이다. 또한 각 쉬프트 단계의 제어 신호를 생성하기 위하여 디코딩 회로를 사용하지 않으므로 설계 면적에서 이득을 보았다. 본 배럴 쉬프터는 임의의 비트에 대해 생성될 수 있고 반도체 제조 공정과 독립적으로 구현 될 수 있도록, Mentor Graphics사의 GDT를 이용하여 모듈생성기로 설계하였다. 설계된 쉬프트는 1 5μ, 1 2μ, 1 0μ 이중 메탈 공정에서 설계 규칙을 만족하였고, GDT의 Lsim을 이용하여 동작을 검증하였다.
모바일그리드 환경에서 성능예측 기반의 작업 스케줄링 기법
송성진(Sungjin Song),진성호(SungHo Chin),정대용(DaeYong Jung),정광식(KwangSik Chung),유헌창(HeonChang Yu) 한국정보과학회 2007 한국정보과학회 학술발표논문집 Vol.34 No.1D
최근 들어, 모바일 장치의 성능이 향상되고 보급률이 증대됨에 따라 모바일 장치를 그리드 자원으로 이용하기 위한 모바일 그리드가 등장하였다. 그러나 모바일 장치가 가지는 무선기기로써의 제약사항 즉, 무선 통신의 불안정성, 이동으로 인한 연결 끊김 등의 문제와 배터리의 제약은 모바일 그리드를 구성하는 데에 많은 어려움을 야기한다. 따라서 본 논문에서는 이러한 제약사항을 극복할 수 있는 환경적인 요소를 고려하여 학교나 회사와 같이 안정적인 무선통신 환경을 제공하고 베터리 충전이 용의한 네트워크 그룹을 가정하였다. 그리고 제한된 성능을 발휘하는 모바일 장치에서 독립적인 소규모 작업의 효율적인 수행을 위해 성능예측 기반 작업 스케줄링 기법을 제시하였다. 이 기법은 네트워크 그룹 내의 모바일 장치의 이용 패턴이 규칙적으로 나타내는 특성을 이용한다. 제안하는 스케줄링 기법에서는 하나의 네트워크 그룹의 성능을 그 그룹에 속한 모바일 장치들의 성능의 합으로 정의하고 시간에 따라 변화하는 모바일 장치들의 성능을 예측하기 위해 기존에 수집된 성능 정보의 통계를 이용한다. 그리고 본 기법은 그리드와 네트워크 그룹, 네트워크 그룹과 모바일 장치 사이의 작업 분배시 예측된 성능 정보를 이용함으로써 네트워크 그룹의 사용률을 높여 전체 작업의 최종 응답시간을 줄일 수 있다.
CFD-DEM 연계 모델을 이용한 파이프라인 세굴 해석
송성진(Seongjin Song),박선호(Sunho Park) 한국해양환경·에너지학회 2020 한국해양환경·에너지학회 학술대회논문집 Vol.2020 No.7
본 연구에서는 CFD-DEM 연계 모델을 이용하여 해저파이프라인 주위에서의 유체 흐름과 토사수송을 해석하였다. 해류와 해저지반의 상호작용을 고려하기 위해 소스코드가 공개된 전산 유체역학 (Computational fluid dynamics, CFD)과 이산요소법 (Discrete element method, DEM) 라이브러리를 각각 활용한 연계기법을 사용하였다. 조밀한 입자유동을 해석하기 위해 unresolved CFD-DEM 연계 모델을 사용하였다. 본 논문에서는 입자 지름과 격자크기 비에 대한 제한을 완화하기 위해 커널 함수를 이용한 평균화 기법을 제시하였다. 수치 기법을 검증하기 위해 입자의 종단속도, 안식각 그리고 입자의 초기 운동 해석 결과를 실험 결과와 비교하였다. 최종적으로, 해저 파이프라인 주위에서 발생하는 세굴을 해석하였다. In this study, a coupled computational fluid dynamics (CFD) and discrete element method (DEM) model was used to simulate the fluid flow and sediment transport around a subsea pipeline. In order to consider the interaction between the seabed and a current, the solver was developed using the open source libraries for CFD and DEM. For dense particle flow, the unresolved CFD and DEM coupling model was used. This paper suggested an averaging method based on the kernel function to reduce the limitation on particle diameter to fluid grid size ratio. To validate numerical methods, a settling velocity of a single particle, an angle of repose and an incipient motion of particles were simulated and compared with the experimental data. Finally, the scour process around a subsea pipeline was investigated and discussed.