http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
마이크로 엔드밀을 이용한 Slot 가공에서의 공구변형에 의한 가공오차 보상
손종인,윤대진,윤길상,서태일 한국공작기계학회 2007 한국공작기계학회 추계학술대회논문집 Vol.2007 No.-
In this paper, we describe about machining error for tool deflection in slot-cutting processes using micro end-mill. In order to determine the compensated tool path, two machining error parameters are defined and modeled using the SEM images. Experiments are carried out to validate the approaches proposed in this paper. In result of, we decrease a machining error in slot-cutting processes for compensated tool path.
무선랜 간섭 환경에서 지그비 네트워크 성능 개선을 위한 채널 선택 기법
손종인,정광수 한국ITS학회 2012 한국ITS학회논문지 Vol.11 No.2
저전력 근거리 통신을 목적으로 개발된 지그비 네트워크는 유비쿼터스 컴퓨팅을 위한 홈네트워크 솔루션으로 많이 활용되고 있다. 하지만 최근 스마트폰 및 타블렛 PC의 보급으로 인해 지그비 네트워크와 동일 주파수를 사용하는 무선랜의 사용이 증가하였고, 이로 인해 주파수 간섭 문제가 빈번히 발생하게 되었다. 이와 같은 주파수 간섭 문제를 해결하기 위해 지그비 네트워크에서의 간섭 최소화 기법의 연구가 활발히 진행되었다. 하지만 기존의 간섭 최소화 기법은 간섭 탐지를 위한 자원 소모가 크거나 간섭 회피를 위한 채널 호핑 시간이 길다는 문제를 갖는다. 본 논문에서는 이러한 문제점을 개선하기 위한 방법을 제안한다. 제안하는 간섭 최소화 기법은 불필요한 자원의 낭비를 줄이기 위해 ACK 메커니즘을 이용하여 간섭을 탐지하며, 테이블 기반의 채널 호핑 기법을 통해 기존의 기법보다 빠르게 간섭을 회피한다. OPNET 시뮬레이터를 이용하여 제안하는 간섭 최소화 기법의 성능을 평가하였다. 실험 결과를 통해 간섭 발생시 제안하는 기법이 기존 기법보다 빠른 채널 호핑이 가능하고 이로 인해 네트워크의 성능을 향상시킬 수 있음을 확인하였다. ZigBee networks developed for low power and short range communication are being used as home network solution for ubiquitous computing. However, as smart phones and tablet PCs have been widely used, WLANs which use same frequency with ZigBee networks have been increasingly used. Therefore, radio frequency interference causes many problems. To solve radio frequency interference problem among ZigBee networks and WLANs, many researches focus on designing interference minimization schemes in ZigBee networks. However, existing schemes have problems that have waste of resource for detecting interference, and have unnecessary time to avoid interference. In this paper, we propose an interference minimization scheme to solve radio frequency interference in ZigBee networks. The proposed scheme detects interference using ACK mechanism to reduce waste of resource, and avoids interference using table driven channel hopping scheme which is faster than existed schemes. The performance of proposed interference minimization scheme is evaluated by using OPNET simulator. Through the simulation result, we prove that proposed scheme has faster channel hopping than existing schemes.
손종인,이학용,손현승,서태일,윤길상 한국공작기계학회 2008 한국공작기계학회 추계학술대회논문집 Vol.2008 No.-
Micro end-milling has been becoming an important machining process to manufacture a number of small products such as micro-devices, bio-chips, micro-patterns and so on. Despite the importance of micro end-milling, many related researches have given grand efforts to micro end-milling phenomenon, for example, micro end-milling mechanism, cutting force modeling and machinability. This paper strongly concerned actual problem, micro tool deflection, which causes excessive machining errors on the workpiece. To research this problem, we measured cutting forces in micro end-milling processes. And then we measured about cutting profile for that processes. At last we make a comparison between tool deflection due to cutting force and measurement of cutting profile.
IEEE 802.16j MMR에서 링크 상태를 고려한 동적 라우팅 주기 조절 기법
손종인,정광수 한국정보과학회 2012 한국정보과학회 학술발표논문집 Vol.39 No.1D
최근 무선 네트워크의 사용이 증가하고 전송하는 데이터의 크기가 증가함에 따라 광대역 무선 네트워크에 대한 연구가 진행되고 있다. 광대역 무선 네트워크 기술인 IEEE 802.16j MMR(Mobile Multi-hop Relay)은 높은 전송률과 셀 영역 확장을 목표로 하는 기술로써 RS(Relay Station)를 통하여 멀티 홉을 지원한다. 본 논문에서는 IEEE 802.16j MMR 환경에서 링크 상태를 고려하여 동적으로 라우팅 주기를 조절하는 기법을 제안한다. 제안하는 라우팅 주기 조절 기법을 통해 경로 복구 지연시간을 최소화 하고 네트워크 자원 소모의 효율성을 높인다. 시뮬레이션을 통하여 제안하는 기법이 네트워크 성능을 향상시킬 수 있음을 확인하였다.
마이크로 엔드밀링에서 공구변형 가공오차 보상에 관한 연구
손종인,송병욱 한국금형공학회 2023 한국금형공학회지 Vol.17 No.4
In this study, we introduce research aimed at minimizing machining errors without compromising productivity by compensating for the machining errors caused by tool deformation. Our approach experimentally establishes the direct correlation between cutting depth and machining error, and creates predictive models using mathematical functions. This method allows for the prediction of compensated cutting depths to obtain the desired cutting profiles, thereby maximizing the compensation of machining errors in the cutting process.
고정밀 플라스틱 제품 성형을 위한 다수 캐비티 사출금형 및 성형 요소기술에 관한 연구
손종인,김철기,송병욱 한국금형공학회 2023 한국금형공학회지 Vol.17 No.4
As a representative method for mass production, a multi-cavity type mold capable of simultaneously molding products of the same shape can be applied. It has the advantage of improving the productivity from several times to several tens of times, but it may cause disadvantages which is the quality deviation with each cavity. This study, therefore, has tried to increase the cavity filling balance by using a melt flipper and a flow distance control part in the runner part of the mold. Along with this, the design and manufacturing of air vents during injection molding have been verified through experimental methods to achieve a higher level of multi-cavity filling balance and dimensional accuracy.