http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
윤희중(H.J. Yun),한영희(Y.H. Han),한상철(S.C. Han),정년호(N.H. Jeong),김정훈(J. H. Kim),성태현(T.H. Sung) 대한기계학회 2004 대한기계학회 춘추학술대회 Vol.2004 No.4
For designing high Tc superconductor journal bearing(HTSJB) which is used on a flywheel energy storage system which requests the free of the bearing loss caused by the friction, it is necessary to understand the basic characteristics of the classical superconductor journal bearing because the mechanical characteristics of the HTSJB are identified by the magnetic relationships between the permanent magnet(PM) and the high Tc superconductor(HTS). In this paper, using the method, frozen image model, the force problems between the PM and the HTS were solved and then the dynamic characteristics of the rotor inside of the HTSJB can be expected in advance by using the basic characteristics between the PM and the HTS. The coefficient of friction of the HTSJB was measured in the vacuum environment. From the results, the mechanical characteristics of HTSJB can be identified using the numerical models.
Current Transport Characteristics of 22.9 ㎸ High Temperature Superconducting Cable System
손송호(S. H. Sohn),임지현(J. H. Lim),류희석(H. S. Ryoo),양형석(H. S. Yang),최하옥(H. O. Choi),마용호(Y. H. Ma),김동락(D. L. Kim),류경우(K. W. Ryu),성태현(T. H. Sung),현옥배(O. B. Hyun),임성우(S. W. Lim),황시돌(S. D. Hwang) 대한전기학회 2008 대한전기학회 학술대회 논문집 Vol.2008 No.7(초록집)
전력설비용 초전도케이블 냉각시스템의 냉각용량 과부하 모의시험
손송호(S. H. Sohn),임지현(J. H. Lim),최하옥(H. O. Choi),양형석(H. S. Yang),전재홍(J. H. Cheon),김동락(D. L. Kim),성태현(T. S. Sung),황시돌(S. D. Hwang) 대한전기학회 2008 대한전기학회 학술대회 논문집 Vol.2008 No.11
초전도케이블의 기술적 경제적 타당성에 대한 논의가 계속 진행되고 있는 가운데 이를 검증하기 위한 실계통 시험이 미국, 중국 및 일본을 포함한 주요 선진국들에서 이루어지고 있다. [1] 대용량 송전 및 절연성능 측면에서 장점을 가지고 있는 초전도케이블이 실제 계통에서 적용한 예가 지금까지 많지 않은 이유는 막대한 초기투자 비용과 함께 신기술 도입에 따른 기술적 신뢰성 확보를 꼽을 수 있다. 특히 케이블 자체의 전기적 특성과 함께 냉각시스템의 신뢰성은 초전도케이블 기술의 상용화를 위해서 반드시 확보되어야 하며 냉각시스템 의 고효율와 함께 장기운전에 따른 냉각시스템의 안정성 및 기기적 특정들이 우선적으로 파악되어야 할 것이다. 본 논문에서는 냉각시스템의 신뢰성을 검증하기 위한 실험의 일환으로 전류와 냉각시스템에 내장되어 있는 히터를 이용하여 열부하를 동시에 인가, 냉각시스템의 냉각용량 과부하 상태를 모의하여 냉각시스템의 반응성을 평가하였다.
액체질소 냉각 시 임의의 홀을 가진 초전도체의 열응력 해석
장건익,이호진,김찬중,한영희,성태현,Jang, G.E.,Lee, H.J.,Kim, C.J.,Han, Y.H.,Sung, T.H. 한국초전도학회 2009 Progress in superconductivity Vol.11 No.1
Temperature distributions and thermal stresses were calculated and analyzed to investigate the effect of the artificial holes to the transient behaviors of the superconductors which was cooled in liquid nitrogen. Three dimensional finite element method was used to calculated the transient temperature and thermal stresses in the superconductors. The cooling speed of the superconductors with holes is faster than those without holes. Because the thermal stresses calculated in the superconductors can be relaxed by the distributed holes, the volume of the peak tensile stress decreases during the cooling in liquid nitrogen. If optimal metal, which can maintain the relaxation of thermal stresses, is used to fill and reinforce the artificial holes, the probability of failure of the superconductors may be decreased by the decrease of volume of peak tensile stress.
이정필(J. P. Lee),정세용(S. Y. Jung),한영희(Y. H. Han),성태현(T. H. Sung) 대한전기학회 2006 대한전기학회 학술대회 논문집 Vol.2006 No.7
본 논문에서는 5 ㎾h급 초전도 플라이휠 에너지 저장장치 (Superconductor Flywheel Energy Storage System : SFES)를 제작하고 시험운전을 통하여 회전 테스트를 수행하였다. 본 연구에서 사용된 초전도 베어링은 저널형 베어링으로써 액체 질소를 순환시켜 초전도체를 냉각시키고 휠을 부양시켜서 전동발전기를 통하여 회전시키게 된다. 액체 질소를 순환하였을 경우 초전도 베어링의 냉각특성을 고찰하였고, 전동 발전기를 이용하여 2000[rpm]까지의 회전 테스트가 수행 되었으며, 전동발전기의 동작 특성 및 회전시 휠의 궤적과 축진동 특성을 테스트 하였다.
Bi/CNT 화합물과 Resin/CNT를 보강한 YBCO 초전도체의 기계적, 자기적 특성 변화
오원석,장건익,한영희,성태현,Oh, W.S.,Jang, G.E.,Han, Y.H.,Sung, T.H. 한국초전도학회 2007 Progress in superconductivity Vol.9 No.1
Bi/CNT composite and resin/CNT were chosen to improve the mechanical properties of $YBa_2Cu_3O_7$(YBCO) superconductor. In order to elucidate the effects of Bi/CNT composite and resin/CNT in YBCO superconductors, melt texture superconductor were impregnated by mixed compound of Bi and CNT into the artificial holes parallel to the c-axis, which were drilled on the YBCO superconductor. Various amount of Bi/CNT and resin/CNT were impregnated to YBCO superconductor with different holes diameters. Typical artificial holes diameters were 0.5, 0.7, and 1.0 mm respectively. Result of three-point bending test measurement, the bending strength with resin/CNT impregnation was improved up to 59.64 MPa as compared with 50.79 MPa of resin/CNT free bulk. Resin/CNT impregnation has been found to be one of the effective ways in improving the mechanical properties of bulk superconductor.