http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Sol-Gel 법에 의한 Nanoporous Alumina Membrane용 Alumina Sol 제조
박자룡,김태환,성재석,송기창 한국화학공학회 2004 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.42 No.1
Sol-Gel법에 의해 출발물질로 aluminum isopropoxide(AIP)를 사용하여, 가수분해 및 해교과정을 거쳐 alumina(boehmite)졸을 제조하였다. 또한 이 졸을 건조오븐에서 건조시켜, 분말을 제조한 후 열처리온도에 따른 분말 결정상의 조성과 기공특성을 조사하였다. 100℃에서 열처리하여 제조된 분말은 boehmite상을 나타내었으며, 500℃에서 γ-alumina로 상전이 되었다. HCl/AIP=0.10의 조건으로 해교된 후 600℃로 열처리된 분말은 4nm의 평균기공 크기를 나타내었다. 또한 해교시 첨가된 HCl양이 증가됨에 따라 기공의 크기는 감소한 반면 열처리 온도가 증가됨에 따라 평균기공의 크기는 증가하였다. Alumina(boehmite) sol was prepared by the sol-gel method from aluminum isopropoxide(AIP) through bydrolysis and peptization processes. Powders were obtained by drying the sol in drying oven, and the powder properties, such as crystalline phase composition and pore structure, were studied as a function of heat-treatment temperatures. The powders showed boehmite phase at 100℃, and transformed to γ-alumina at 500℃. The powders, heat-treated at 600℃ after being peptized at HCl/AIP=0.10, 4㎚ in average pore diameter. The average pore diameter of the powders decreased with increasing HCl concentrations added uring peptization process, but increased with increasing heat-treatment temperatures.
서원식,김태환,성재석,송기창 한국화학공학회 2004 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.42 No.1
화학환원법을 이용하여 AgNO_(3) 수용액에 환원제를 첨가시키는 방법으로 Ag분말을 제조하였으며, 이 과정 중 환원제의 종류 변화(N_(2)H_(4), NaBH_(4))가 얻어진 분말의 특성 변화에 미치는 영향을 살펴보았다. 또한 분말합성 과정 중 계면활성제(Tween20)를 수용액에 첨가하여 계면활성제가 분말의 특성에 미치는 영향도 살펴보았다. 제조된 분말의 SEM 측정결과 환원제로 sodium borohydride(NaBH_(4))를 사용하면서 제조된 Ag 분말의 크기는 약 0.3㎛인 반면 hydrazine(N_(2)H_(4))을 사용하여 제조된 분말의 크기는 약 1㎛로 sodium borohydride를 사용해 제조한 분말의 크기가 더 작고 고른 크기 분포를 보였다. 또 환원제로써 hydrazine을 사용시 계면활성제를 첨가하여 제조된 Ag 나노분말의 크기는 50nm정도로 계면활성제를 첨가하지 않고 제조된 분말보다(1㎛) 입자의 크기가 더 작고 균일한 입도 분포를 나타내었다. Silver powders were prepared by chemical reduction method using reductants in AgNO_(3) aqueous solution. The effect of the type of reductants(N_(2)H_(4), NaBH_(4)) was investigated on the properties of the obtained powders. In addition, the effect of the addition of asurfactant(Tween 20) during particle synthesis was studied. The Ag powders prepared using the sodium borohydride as a reductant were found to be 0.3㎛ in particle diameter, while those using the hydrazine showed 1㎛ in particle diameter. The mean particle size of Ag nanopowders, prepared by the addition of Tween 20 as a surfactant, was 50㎚, which is smaller than 1㎛ powders formed without the surfactant.
김태환,성재석,최정식,추고연,유윤종 한국공업화학회 1999 응용화학 Vol.3 No.2
Mischmetal(Mm) is substituted for La of AB_5 type alloys because of the lower cost of Mm than La. But the equilibrium H₂ absorption pressure is more sensitive to Mm than La. As the volatility of Mm is higher than other metal component of the AB_5 alloy, it is significant to optimize the excess Mm quantity of MmNi_5 type alloys. In this work, series of excess Mm(1, 5, 10, 15%) of a stoichiometry were investigated with XRD and PCT measurements.