http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
평균 제곱 투영 오차의 기울기에 기반한 가변 망각 인자 FAPI 알고리즘
서영광(YoungKwang Seo),신종우(Jong-Woo Shin),서원기(Won-Gi Seo),김형남(Hyoung-Nam Kim) 대한전자공학회 2014 전자공학회논문지 Vol.51 No.5
본 논문에서는 고속 부공간 추적 기법인 FAPI (Fast Approsimated Power Iteration)에 GVFF RLS (Gradient-based Variable Forgetting Factor Recursive Least Square Error)를 적용한 GVFF FAPI 를 제안한다. 기존의 FAPI는 신호의 공분산 행렬을 추정하기 위해 고정 망각 인자를 사용하기에, 부공간이 지속적으로 변하는 비정재 환경에 적용하기 여려운 단점이 있다. 이러한 문제점을 해결하기 위해, GVFF FAPI는 개선된 MSE (Mean Square Error)의 분석으로부터 유도된 MSE의 기울기 기반의 시변 망각 인자를 사용한다. 또한 GVFF RLS의 망각 인자 업데이트 식을 개선하여 부공간이 지속적으로 변하는 비정재 환경에서 부공간 에러를 줄인다. 개선된 망각 인자 업데이트 식은 MSE의 기울기가 양수이면 망각 인자를 빠르게 감소하게 하고 MSE의 기울기가 음수이면 망각 인자를 천천히 증가시킨다. 모의실험을 통해서 도래각이 지속적으로 변하는 환경에서 GVFF FAPI 알고리즘이 기존의 FAPI 알고리즘보다 작은 부공간 에러를 가지는 것을 보이고, 추적된 부공간을 도래각 추정기법에 적용하였을 때 추적된 도래각의 RMSE (Root Mean Square Error)가 더 작은 것을 확인한다. This paper proposes a fast subspace tracking methods, which is called GVFF FAPI, based on FAPI (Fast Approximated Power Iteration) method and GVFF RLS (Gradient-based Variable Forgetting Factor Recursive Lease Squares). Since the conventional FAPI uses a constant forgetting factor for estimating covariance matrix of source signals, it has difficulty in applying to non-stationary environments such as continuously changing DOAs of source signals. To overcome the drawback of conventioanl FAPI method, the GVFF FAPI uses the gradient-based variable forgetting factor derived from an improved means square error (MSE) analysis of RLS. In order to achieve the decreased subspace error in non-stationary environments, the GVFF-FAPI algorithm used an improved forgetting factor updating equation that can produce a fast decreasing forgetting factor when the gradient is positive and a slowly increasing forgetting factor when the gradient is negative. Our numerical simulations show that GVFF-FAPI algorithm offers lower subspace error and RMSE (Root Mean Square Error) of tracked DOAs of source signals than conventional FAPI based MUSIC (Multiple SIgnal Classification)
Linux 환경에서 SATA HDD의 전송 속도 향상 알고리즘
김기중(Ki-Joong Kim),서원기(Won-Gi Seo),최준영(Joon-Young Choi) 한국정보기술학회 2012 한국정보기술학회논문지 Vol.10 No.4
In this paper, we present an application method of SATA HDD based on Linux. Using Linux module programming and modifying the device driver layer in Linux kernel, we directly control the AHCI device driver in Linux kernel. we control several SATA HDDs in parallel and transfer a large amount of data in a separate unit. Consequently, we achieve a large amount of throughput with the several SATA HDDs, and the throughput increases in proportion to the number of SATA HDDs. Eventually, we overcome the bottleneck effect of data transfer due to physical limits of magnetic disks and SATA interfaces without attaching the extra hardware device except the several SATA HDD.
가중평균 볼테라 커널을 이용한 아날로그-디지털 변환기의 블라인드 비선형 등화기 설계
박성문(Sung-Mun Park),안철진(Cheol-Jin An),김형우(Hyoung-Woo Kim),서원기(Won-Gi Seo),최준영(Joon-Young Choi) 한국정보기술학회 2014 한국정보기술학회논문지 Vol.12 No.9
We propose a new method to design a blind nonlinear equalizer to improve the performance of ADC(Analog-to-Digital Converter) by using a weighted averaged Volterra kernels. We employ the structure of the existing blind equalizer using Volterra series for the basic structure of the designed equalizer. While the Volterra kernels are determined from output signals driven by Gaussian input signals in the existing methods, the Volterra kernels are determined by weightedly averaging a set of Volterra kernels obtained from several single-tone input signals. Consequently, the proposed method enables to design an equalizer without additional experiments for Gaussian signals when ADC’s outputs are available for several single-tone input signals. Applying the designed equalizer to a real ADC model and conducting experiments, we confirm that the equalizer adequately compensates the nonlinearity of ADC. Moreover, comparing the experiment results to those from an existing blind equalizer, we verify that the designed equalizer achieves a similar performance to the existing equalizer.
PN 511칩 코드의 ACF를 이용한 지상파DTV 이동 채널의 Delay Profile 특성 분석에 관한 연구
박기욱(Park Kee-Wook),이종현(Lee Chong-Hyun),서원기(Seo Won-Gi),김승원(Kim Seung-Won),이용태(Lee Yong-Tae),차재상(Cha Jae-Sang) 한국방송·미디어공학회 2006 한국방송공학회 학술발표대회 논문집 Vol.2006 No.-
본 논문에서는 이동 환경에서 지상파 DTV의 Delay Profile의 도출을 위하여 이동 상태에서 필드테스트로 측정된 수신데이터에 포함되어 있는 PN 511(Psuedo Noise)코드를 이용하여 다양한 이동환경에서의 ACF(Auto Correlation Function)값을 도출하였다. 또한, 지역별 대표적인 LOS지역, NLOS지역, 중간지역으로 구분되는 대표적인 세 곳을 선정하여 다양한 이동속도에서의 도출된 ACF값을 통해 최대지연, 평균지연, RMS 지연을 도출하여 이동환경에서의 지상파 DTV의 Delay Profile을 제시하였다.