http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
방재철(Bang Jae-Cheol) 한국산학기술학회 2006 한국산학기술학회논문지 Vol.7 No.5
YBa₂Cu₃O<sub>7-δ</sub> (YBCO)계 초전도 선재용 GdAlO₃(GAO) 버퍼층을 졸-겔(sol-gel) 공정에 의해 제조하였다. 전구체 용액은 Gd 질산염과 Al 질산염을 1:1 화학양론비로 하여 메탄올에 용해하여 준비하였다. 전구체 용액을 SrTiO₃(STO) (100) 단결정 기판위에 스핀 코팅하고, 수분이 포함된 N₂-5% H₂ 분위기에서 1000℃에서 2시간 열처리 하였다. 열처리 후 GAO 층의 표면에 대한 주사전자현미경 관찰에 의해 GAO 층이 에피택셜의 특징인 각면 형상을 갖는 것을 알 수 있었다. x-선 회절분석에 의하면 GAO 벼퍼층은 c-축으로 우선 배향된 에피택셜 박막으로써 반가폭이 각각 (002)면에서 0.29°(out-of-plane),{112}변에서 1.10°(in-plane)의 우수한 배향성을 나타내였다. GdAlO₃(GAO) buffer layer for YBa₂Cu₃O<sub>7-δ </sub>(YBCO) coated superconductor wire was fabricated by sol-gel processing. Precursor solution was prepared by dissolving 1:1 stoichiometric quantaties of gadolinium nitrate hexahydrate and aluminum nitrate nonahydrate in methanol. The solution was spin-coated on SrTiO₃(STO) (100) single crystal substrates and heated at 1000℃ for 2 h in wet N₂-5% H₂ atmosphere. A SEM(scanning electron microscopy) observation of the surface morphology of the GAO layer has shown that it has a faceted morphology indicating epitaxy. It was shown from x-ray diffraction(XRD) that GAO buffer layer was highly c-axis oriented epitaxial thin film with both good out-of-plane(FWHM=0.29° for the (002) reflection) and in-plane (FWHM=1.10° for the {1l2} reflection) alignment.
방재철(Bang Jae-Cheol),이지훈(Lee Ji-Hun) 한국산학기술학회 2005 한국산학기술학회논문지 Vol.6 No.6
Dry film 공정에 의해 PDP(Plasma Display Panel)용 무연 투명유전체를 제조하였다. 여러 슬러리 조성으로부터 고밀도 green sheet를 제조하는데 최적의 조성을 선정하였다. 한편, 슬러리는 양질의 green sheet를 제작하는데 적합한 shear thinning 특성을 나타냈다. 제조한 투명유전체의 열팽창계수는 유리기판인 PD-200과 유사한 97×10<sup>-7</sup>℃로측정되었다. PD-200에 접합된 투명유전체의 단면 주사현미경 관찰로부터 두 층은 캡이 없이 매우 견실히 접합되어 있음을 확인할 수 있었다. Dry film method was applied to fabricate lead-free transparent dielectric for PDP(Plasma Display Panel). From various slurry compositions, it was able to find out the- best composition for producing high density green sheet. The slurry exhibited shear thinning characteristics which are known to be suitable for producing a high quality green sheet. The thermal expansion coefficient of the fabricated transparent dielectric was measured to be 97×10<sup>-7</sup>℃ which is close to the value of the glass substrate(PD-200). Cross sectional SEM of the transparent dielectric layer on PD-100 showed that the two layers were wen attached each other with no observable gaps between them.
방재철,Bang, Jae-Cheol 한국전기전자재료학회 2006 전기전자재료학회논문지 Vol.19 No.1
The effects of $B_2O_3$ addition on the low-temperature sintering behavior and microwave dielectric properties of $(Zn_{0.8}Mg_{0.2})TiO_3$ ceramic system were investigated. Highly dense samples were obtained at the sintering temperatures below $900^{\circ}C$. The $Q{\times}f_o$ values were determined by the microstructures and sintering shrinkages which are affected by the amount of $B_2O_3$ and sintering temperature. Temperature coefficient of resonance frequency($T_f$) changes to a positive value with increasing the amount of $B_2O_3$ due to the increased amount of rutile phase which is one of the reaction products between $(Zn_{0.8}Mg_{0.2})TiO_3$ and $B_2O_3$. For $6.19 moi.{\%}B_2O_3$-added $(Zn_{0.8}Mg_{0.2})TiO_3$ system, it exhibits ${\epsilon}_r$ = 23.5, $Q{\times}f_o$ = 53,000 GHz, and $T_f$ = 0 ppm/$^{\circ}C$ when sintered at $900^{\circ}C$ for 5 h.
B₂O₃첨가에 따른 (Zn0.8Mg0.2) TiO₃계의 마이크로파 유전특성
심우성(Woo-Sung Sim),방재철(Jaecheol Bang) 한국산학기술학회 2003 한국산학기술학회 학술대회 Vol.- No.-
B₂O₃첨가에 따른 (Zn0.8Mg0.2)TiO₃계 세라믹스의 마이크로파 유전특성에 대하여 연구하였다. B₂O₃의 첨가량에 비례하여 B₂O₃와 (Zn0.8Mg0.2)TiO₃와의 반응에 의한 TiO₂ 석출물의 양이 증가하며 공진주파수 온도계수가 증가하였다. 소결온도에 따라 액상의 양, 미세조직, TiO₂와 2차상의 석출거동이 상이하게 나타났다. 6.19㏖% B₂O₃를 첨가한 시편을 900℃에서 5시간 소결시 εr = 23.5, Q×f。 = 67,500 ㎓, τf = -1.42 ppm/℃의 우수한 마이크로파 유전특성을 얻을 수 있었다.
하소온도에 따른 (Zn0.8Mg0.2)TiO₃계의 마이크로파 유전특성
심우성(Woo-Sung Sim),방재철(Jaecheol Bang) 한국산학기술학회 2003 한국산학기술학회 학술대회 Vol.- No.-
하소온도에 따른 (Zn0.8Mg0.2)TiO₃ 마이크로파 유전체 세라믹스의 소결거동과 마이크로파 유전특성의 변화를 연구하였다. 저온소결을 위하여 0.45 wt.%Bi₂O₃와 0.55 wt.%V₂O₅를 침가하였으며, 1000℃이하의 온도에서 소결하여 치밀한 소결체를 얻을 수 있었다. 800℃~1000℃의 범위의 여러 온도에서 하소를 하고 소결 전·후의 존재상과 미세구조의 분석을 통하여, 하소한 분말에 존재하는 미반응상 및 이차상이 최소화될 때 높은 Q×f。값을 갖는 것을 알 수 있었다. 1000℃에서 하소한 후 900℃에서 소결했을 때, 주상이 Hexagonal이고 미세구조가 균일하였으며, 이때 Q×f。 = 42,000㎓, εr = 22를 나타냈다.
차량 레이다용 밀리미터파 광대역 직렬-갭 급전 배열 안테나 설계
이영표(Young Pyo Lee),이종민(Jong Min Lee),방재식(Jae Sik Bang),정태용(Tae Yong Jung),이종선(Jong Seon Lee),이동환(Dong Hwan Lee),류현상(Hyun Sang Lyu),황금철(Keum Cheol Hwang) 한국전자파학회 2020 한국전자파학회논문지 Vol.31 No.4
본 논문에서는 직렬 급전 마이크로스트립 배열 안테나의 광대역 특성을 구현하기 위해 주파수에 따른 빔 틸팅 특성을 억제하는 갭 커플링 직렬 급전 마이크로스트립 배열 단일 안테나를 설계하였다. 이를 바탕으로 79 GHz 밀리미터파 대역 차량 레이다용 안테나로 적용할 수 있도록 광대역 갭 커플링 직렬 급전 마이크로스트립 배열 안테나로 확장하였다. 79 GHz 대역에서 시뮬레이션 및 실험 결과를 서로 비교함으로써 설계한 안테나의 성능을 검증하였다. In this paper, the design of a gap-coupled series-fed microstrip array antenna, which suppresses beam tilting characteristics to realize the broadband, is presented. Based on the unit antenna, this application is extended to a gap-coupled series-fed microstrip array antenna to be applied to an antenna for a 79-GHz millimeter-wave band vehicle-based radar. Measurements were performed to validate the designed antennas for use in automotive radar applications.
하이브리드(알루미늄&스틸)타입 도어의 열변형 개선 구조 개발
최기현(Choi, Ki Hyun),조의찬(Cho, Eui Chan),정재혁(Cheong, Jae Hyuk),방재철(Bang, Jae Chul),신성철(Shin, Sung Chul),류현정(Ryu Hyeon Jeong),오영현(Oh, Young Hyun),이병룡(Lee, Byung Ryeon) 한국자동차공학회 2019 한국자동차공학회 부문종합 학술대회 Vol.2019 No.5
It describes a hybrid door that is being developed in advance by applying aluminium to the outer panel with the greatest weight saving effect on the door and steel on the inner panel assembly requiring high formability and weldability.