http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
광섬유 브래그 격자를 이용한 광 분기 결합기의 광신호 대 잡음비 측정방법
윤지욱,박혁,김광준,Youn, Ji-Wook,Park, Heuk,Kim, Kwang-Joon 대한전자공학회 2002 電子工學會論文誌-SD (Semiconductor and devices) Vol.39 No.10
본 논문에서는 광섬유 브래그 격자를 이용하여 광 분기 결합기(Optical add/drop mutiplexer)의 성능을 감시하기 위해서 다 채널 광신호의 채널별 광신호 대 잡음비를 실시간으로 측정하였다. 광 분기 결합기에 입력되는 다 채널 광신호의 채널별 세기가 -6 ㏈m에서 -23㏈m 까지 변화할 경우 채널별 광신호 대 잡음비는 0.1 ㎜의 분해능을 가지는 광 스펙트럼 분석기 (Optical spectrum analyzer)와 비교해서 0.8㏈ 오차 이내로 측정되었다. A simple optical signal to noise ratio monitoring method using fiber Bragg grating is proposed for monitoring performance of OADM. OSNR of each channel is determined by monitoring the optical power transmitted and reflected from fiber Bragg gratings, simultaneously. We have obtained OSNR with accuracy better than 0.8㏈ compared with OSA of 0.1nm optical resolution in the wide input power range between -6 ㏈m and -23㏈m per channel.
차동 위상 변조 전송 시스템에서 수신 신호 눈열림 특성을 이용한 직접 검출 수신단 최적화 및 안정화 제어 연구
장윤선,박혁,김광준,Jang, Youn-Seon,Park, Heuk,Kim, Kwang-Joon 한국광학회 2005 한국광학회지 Vol.16 No.4
순수 차동 위상 변조(NRZ_DPSK) 신호의 눈열림 특성을 이용하여 차동 위상 변조(DPSK) 기반 전송 시스템 수신단에 사용되는 1-비트 지연 마흐젠더 간섭계의 최적 동작점을 자동으로 검색하고, 운용 시 이를 유지하는 능동 안정화 제어 방법을 제안하였다. 이 방법은 추가 부품 없이 밸런스 수신기의 두 출력 DC 전압 차이를 비교하여 제어하므로 경제적이고 구성이 간단하며 입력 파워 의존성이 없다. 실험 결과, 전송율 $10\%$ 정도의 반송 광신호 주파수 변화에 대해서도 안정된 성능을 보였다. We propose an active stabilization method for the receiver of NRZ-DPSK transmission. The 1-bit delayed Mach-Zehlder interferometer is thermally controlled to maintain the largest DC component power ratio between the constructive and destructive output ports, for the optimum transmission condition. This method is very cost effective since no additional components are required. Experimental results show that the proposed scheme guarantees error free performance even when there was ~ 1 GHz optical carrier frequency fluctuation in 10 Gbps transmission.