혼합미생물배양체를 이용한 폐활성슬러지 가용화 산물로부터 polyhydroxyalkanoate 생합성

박태준,유영재,정동훈,이선희,이영하,Park, Taejun,Yoo, Young Jae,Jung, Dong Hoon,Lee, Sun Hee,Rhee, Young Ha 한국미생물학회 2017 미생물학회지 Vol.53 No.3

SA-TSA 복합구를 이용해 폐활성슬러지로부터 VFAs를 생산하고, 이를 발효 기질로 이용해 PHA를 생산하기 위한 실험을 수행하였다. 30%의 SA-TSA 복합구를 처리하였을 때 폐활성슬러지의 가용화 효율이 가장 효과적으로 일어나서 약 3,900 mg/L의 SCOD값을 얻었으며, acetic acid, propionic acid, iso-butyric acid 및 butyric acid를 주성분으로 하는 2,961 mg/L 농도의 VFAs를 얻었다. VFAs를 외부탄소원으로 이용하는 SBR 공정을 통해 PHA를 생합성하는 미생물을 농화배양하는 실험을 수행하고 PCR-DGGE로 분석한 결과, 우점 미생물로 Vibrio spp.와 Corynebacterium glutamicum이 확인되었다. 폐활성슬러지로부터 얻은 VFAs를 탄소원으로 사용하여 농화된 혼합미생물배양체를 회분배양한 결과, 건체량의 25.9%에 달하는 PHB를 얻었다. 본 연구결과는 SA-TSA 복합구를 이용하여 폐활성슬러지로부터 VFAs를 얻음으로써 폐슬러지 감량화 효과를 얻고, 또 혼합미생물배양체를 이용하여 VFAs를 바이오폴리머로 전환함으로써 경제성을 확보할 수 있는 새로운 생물공정의 가능성을 보여준다. A new approach to the solubilization of waste activated sludge (WAS) using alginate-quaternary ammonium complex beads was investigated under controlled mild alkaline conditions. The complex beads were prepared by the reaction of sodium alginate (SA) with 3-(trimethoxysilyl)propyl-octadecyldimethylammonium chloride (TSA) in acid solution, followed by crosslinking with $CaCl_2$. Treatment of WAS with SA-TSA complex beads was effective for enhancing the efficacy of WAS solubilization. The highest value of soluble chemical oxygen demand (SCOD) concentration (3,900 mg/L) was achieved after 10 days of treatment with 30% (v/v) SA-TSA complex beads. The WAS solubilization efficacy of the complex beads was also evaluated by estimating the concentrations of volatile fatty acids (VFAs). The maximum value of VFAs was 2,961 mg/L, and the overall proportions of VFAs were more than 75% of SCOD. The main components of VFAs were acetic, propionic, iso-butyric, and butyric acids. These results suggest that SA-TSA complex beads might be useful for enhancing the solubilization of WAS. The potential use of VFAs as the external carbon substrate for the production of polyhydroxyalkanoate (PHA) by a mixed microbial culture (MMC) was also examined. The enrichment of PHA-accumulating MMC could be achieved by periodic feeding of VFAs generated from WAS in a sequencing batch reactor. The composition of PHA synthesized from VFAs mainly consisted of 3-hydroxybutyrate. The maximum PHA content accounted for 25.9% of dry cell weight. PHA production by this process is considered to be promising since it has a doubly beneficial effect on the environment by reducing the amount of WAS and concomitantly producing an eco-friendly biopolymer.

산업용 IoT 네트워크 기술의 진화: 과거, 현재, 미래 동향

박태준,김은희,차재선,이계선,T.J. Park,E.H. Kim,J.S. Cha,K.S. Lee 한국전자통신연구원 2023 전자통신동향분석 Vol.38 No.3

Wireless communication technology has mainly been used to fulfill the demands of industrial sites at which performance is not a critical concern. However, ongoing discussions and efforts are now focused on securing core wireless communication technologies to enable the transformation or expansion of wired industrial IoT (Internet of Things) network technology into a flexible and dynamic smart manufacturing system. This paper provides an overview of current wireless industrial IoT network technology and the recent wireless time-sensitive networking technology. It outlines the challenging level of reliability required for wireless communication technology to coexist with or replace its wired counterpart in future smart manufacturing systems. Additionally, we introduce ultra-reliable time deterministic network as the core technology of wireless industrial communications and focus on its reliability and delay characteristics.

편측 성대마비에서 Restylane을 이용한 성대내 주입치료 1예 -증 례 보 고-

박태준,임재열,서형석,최홍식,Park, Tae-Joon,Lim, Jae-Yol,Seo, Hyung-Seok,Choi, Hong-Shik 대한후두음성언어의학회 2004 대한후두음성언어의학회지 Vol.15 No.1

When a person was suffered from vocal cord paralysis or glottic insufficiency, injection materials (e.g Teflon, Bovine collagen, Autologous fat & tendon, Gelfoam) into the vocal cord have been widely used. But each injection material has some disadvantage. We introduce the Restylane which is composed of a hyaluronic acid, artificially producted. It has advantage of rate foreign body reaction, proper endurance, easy to injection. The patient was 55-year-old woman who showed left vacal cord paralysis after pneumonectomy due to aspergillosis, taken the type I thyroplasty and arytenoid adduction. The middle portion of left vocal cord has some atropic mucosal change, slight chink was noted. The restylane injection into vocal cord was done with suspension laryngoscopy under general anesthesia. In the 3 month follow-up after Restylane injection, the quality of voice has been better progressively. We report a case of Restylane injection as a new method for the improvement of quality of voice.

Al-Si 용융도금된 11%Cr 페라이트 스테인리스강, STS409L GTA 용접부의 미세조직과 경도

박태준,공종판,나혜성,강정윤,엄상호,김정길,우인수,이종섭,Park, Tae-Jun,Kong, Jong-Pan,Na, Hye-Sung,Kang, Chung-Yun,Uhm, Sang-Ho,Kim, Jeong-Kil,Woo, In-Su,Lee, Jong-Sub 대한용접접합학회 2010 대한용접·접합학회지 Vol.28 No.3

Ferritic stainless steels, which have relatively small thermal expansion coefficient and excellent corrosion resistance, are increasingly being used in vehicle manufacturing, in order to increase the lifetime of exhaust manifold parts. But, there are limits on use because of the problem related to cosmetic resistance, corrosions of condensation and high temperature salt etc. So, Aluminum-coated stainless steel instead of ferritic stainless steel are utilized in these parts due to the improved properties. In this investigation, Al-8wt% Si alloy coated 409L ferritic stainless steel was used as the base metal during Gas Tungsten Arc(GTA) welding. The effects of coated layer on the microstructure and hardness were investigated. Full penetration was obtained, when the welding current was higher than 90A and the welding speed was lower than 0.52m/min. Grain size was the largest in fusion zone and decreased from near HAZ to base metal. As welding speed increased, grain size of fusion zone decreased, and there was no big change in HAZ. Hardness had a peak value in the fusion zone and decreased from the bond line to the base metal. The highest hardness in the fusion zone resulted from the fine re-precipitation of the coarse TiN and Ti(C, N) existed in the base metal during melting and solidification process and the presence of fine $Al_2O_3$ and $SiO_2$ formed by the migration of the elements, Al and Si, from the melted coating layer into the fusion zone.

간 이식 예정 환자의 구강건강상태 및 치과치료 요구도에 관한 연구

박태준,고홍섭,Park, Tae-Jun,Kho, Hong-Seop 대한안면통증구강내과학회 2009 Journal of Oral Medicine and Pain Vol.34 No.1

Liver transplantation is definitive treatment for the patients suffering from hepatitis, severe liver cirrhosis and liver cancer. In these patients, systemic infections under immunosuppression may occur easily. Therefore, primary object of dental treatments before liver transplantation is absolute removal of oral infection source. In addition, comprehensive dental management plan is essential for success of liver transplantation. The present study has been performed to investigate decayed, missing and filled permanent teeth index(DMFT index), degree of oral hygiene, past medical history, need of dental treatment, completion of dental treatment need and time interval between dental visit and operation date of liver transplantation in liver transplant candidates. Obtained results were as follows; 1. Decayed teeth of the patients were 2.68, missing teeth were 4.02 and filled teeth were 3.42. DMFT index was 10.12. 2. Twenty percents of patients showed moderate to severe food impactions, 42.2% of patients had moderate to heavy calculus and 37.8% of patients displayed gingival inflammation with swelling. 3. Patients needed periodontal treatments more than any other dental treatments. Periodontal treatments were needed for 88.9% of patients, operative & endodontic treatments were 46.7% of patients and 33.3% of patients needed for oral & maxillofacial surgical treatments. 4. Among 90 patients, time interval between scheduled operation date of liver transplantation and dental visit was within 2 weeks for 32.2% of patients, within 1 week for 20.0% of patients. In conclusion, most liver transplant candidates needed dental treatments for removal of potential infection sources. However because of insufficient interval between dental visit and operation date, they had taken liver transplantation procedures without comprehensive dental management. Development of preventive and comprehensive dental management program is mandatory for these patients. Cooperative interdisciplinary management will play a positive role for successful liver transplantation.

CP강의 디스크레이저 용접부의 경도특성에 미치는 B 함유량의 영향

박태준,유정우,강준일,한태교,진광근,강정윤,Park, Tae-Jun,Yu, Jung-Woo,Kang, Jun-Il,Han, Tae-Kyo,Chin, Kwang-Keun,Kang, Chung-Yun 대한용접접합학회 2011 대한용접·접합학회지 Vol.29 No.1

CP steel was developed to reduce the weight and increase the strength of car body. When it was welded using state-of-the-art disk laser welding, the effected of boron on the microstructure and hardness were investigated. Welding power was fixed at 3.5kW and welding speeds were 4,8 and 12m/min. Full penetration occurred in welding speed of 12m/min and weld bead was almost unchanged with boron contents. But the welding speed increased, the upper and lower bead were narrowed. In a welding speed of more than 8m/min, underfill defects were formed on the bead bottom. The hardness of weld zone was somewhat fluctuation in fusion zone and HAZ showed the highest hardness values. The hardness of each region showed little change with the boron contents, and softening phenomenon occurred in the HAZ near the base metal regardless of the boron contents.

단일예측제어의 파라미터 특성 및 튜닝 방법의 응용

박태준,윤진규,윤인섭 ( Tae Joon Park,Jin Kyu Yoon,En Sup Yoon ) 한국화학공학회 1995 화학공학의이론과응용 Vol.1 No.2

폐쇄성 수면무호흡증 여자 환자에서 렘수면 의존성 무호흡과 비의존성 무호흡의 호흡의 비교

박태준,정도언,Park, Tae-Joon,Jeong, Do-Un 대한수면의학회 2008 수면·정신생리 Vol.15 No.1

렘수면 의존성' 폐쇄성 수면무호흡증(REMOSA)에 대한 연구는 일반적인 폐쇄성 수면무호흡증(OSAS)에 대한 연구에 비해 지난 10여 년 동안 활발한 편이 아니었으며, 그 중요성 역시 간과되어 왔다. REM-OSA가 남자에서보다 여자에서 좀 더 흔히 일어난다고 보고한 연구들은 있었으나, 아직까지 여자 환자군을 대상으로 한 연구는 없었다. 따라서, 이 연구에서는 폐쇄성 수면무호흡증 여자 환자군을 대상으로 하여 렘수면 의존성 무호흡증군(REM-OSA)을 렘수면 의존성이 없는 무호흡증군(SND-OSA)과 비교 연구하여 이 질환의 특성에 대해 살펴보고자 하였다. 방 법 : 2004년 10월부터 2006년 2월까지 서울대학교 병원 수면의학센터에서 야간 수면다원검사를 시행하여 폐쇄성 수면무호흡증으로 진단을 받은(AHI>5 ; AHI:apneahypopnea index) 여자 환자 53명중 비교 연구를 위해 경도(5<AHI<15) 31명, 중등도(15<AHI<30) 13명을 뽑아 총 44명을 대상으로 삼았다. REM-OSA의 진단은 AHI-R/AHI-NR>2와 AHI-NR<15(AHI-R : AHI during REM sleep, AHI-NR : AHI during non-REM sleep)을 동시에 만족하도록 기준을 설정하였고, 렘수면에 의존하지 않는 무호흡증환자(SND-OSA)군과 제반 변인들에 관해 비교 분석을 하였다. 그리고 산술적인 진단을 적용한 환자군과 육안판독으로 진단한 환자군도 비교하였다. 결 과 : 총 44명 중 산술적인 진단기준을 통해 REMOSA로 진단된 환자는 28명(63.6%), 육안 판독으로 진단된 환자는 24명(54.5%)이었다. 산술적 진단기준에 따른 REM-OSA군과 SND-OSA군 비교에서 두 군간에 저호흡지수, 무호흡-저호흡지수, 비렘수면 무호흡-저호흡지수, 총 수면시간, 총각성시간, 수면효율, 1단계 수면 분율, 2단계 수면 분율, 렘수면 단계 분율, REM 잠복시간에서 통계적으로 유의한 차이(p<0.05)가 있었다. 진단에 관여하는 변인인 무호흡-저호흡지수 비율(AHI-R/AHI-NR)에 영향을 주는 변인은 렘수면 단계 분율(B=0.537, p=0.002)이었으며, REM-OSA는 중증도가 경할수록(${\chi}^2=13.117$, p<0.001), 렘수면 단계 분율이 클수록(${\chi}^2=13.325$, p=0.001) 더 흔하게 진단되었다. 그리고, 산술적인 진단기준으로 REM-OSA를 진단한 결과와 육안 판독으로 진단한 결과 간에는 통계적으로 유의한 차이가 없었다(p=0.157). 결론 : 이 연구에서 살펴본 바로는 REM-OSA 환자군과 SND-OSA 환자군 간에 야간 수면다원검사로 산출한 수면 변인과 수면 구조의 유의한 차이가 있었다. 이 연구는 폐쇄성 수면무호흡증 여자 환자군을 대상으로 REM-OSA를 국내외 최초로 분석한 점에서 의의가 있다. Objectives: A few studies have compared REM sleep-dependent obstructive sleep apnea syndrome (REM-OSA) with sleep stage non-dependent apnea syndrome (SND-OSA). Despite that REM-OSA might be more common in women than men, no studies have examined the probable characteristics of women patients with obstructive sleep apnea syndrome (OSAS). This study aimed at finding out the characteristics of REM-OSA in women by comparing it with SND-OSA. Methods: Fifty-three subjects diagnosed as OSAS (AHI>5 ; AHI : apnea-hypopnea index) with nocturnal polysomnography at the Center for Sleep and Chronobiology of the Seoul National University Hospital between October 2004 and February 2006 were studied. Of them, 44 subjects with OSAS severity of mild (5<AHI<15) or moderate (15<AHI<30) degree were finally chosen. The criteria for diagnosing REM-OSA were AHI-R/AHI-NR>2 and AHI-NR<15 (AHI-R : AHI during REM sleep, AHI-NR : AHI during non-REM sleep). We compared REM-OSA group with SND-OSA as well as the criteria-determined REM-OSA cases with the visually-determined ones. Results: Among 44 subjects, 28 persons (63.6%) turned out to have REM-OSA by our criteria and 24 persons (54.5%) by visual determination. Statistically significant differences (p<0.05) were found between REM-OSA and SND-OSA groups in AHI, hypopnea index, total sleep time, total wake time, sleep efficiency index, percents of stage 1, 2 and REM sleep, and REM latency. Percent of stage REM sleep (%REM) turned out to have influence on AHI ratio (AHI-R/AHI-NR) (B=0.537, p=0.002). REM-OSA was likely to be diagnosed in milder severity of OSAS (${\chi}^2=13.117$, p<0.001) and those with higher %REM (${\chi}^2=11.325$, p=0.001). There was no significant difference between the criteria-determined and the visually-determined cases of REM-OSA. Conclusion: We suggest that REM-OSA and SND-OSA patients be differentiated in terms of pathophysiology and treatment strategies. Visual determination of REM-OSA might be useful as the screening procedure of REM-OSA. Further studies on women with OSAS and REM-OSA need to be done.

LPWA 기반 IoT 전용 네트워크 기술동향

박태준,이계선,정운철,최병철,방효찬,Park, T.J.,Lee, K.S.,Jeong, W.C.,Choi, B.C.,Bang, H.C. 한국전자통신연구원 2017 전자통신동향분석 Vol.32 No.1

넓은 커버리지를 요구하는 응용이 늘면서 서비스 지연에 민감하지 않은 소량의 데이터를 전달하기에 적합한 LPWA 네트워크 기술이 주목받고 있다. 본고는 LPWA 네트워크기술을 시장과 밀접한 관련을 갖고있는 무선 대역으로 구분하여, 비면허 대역 기술과 면허 대역 기술로 나누어 최근 개발 및 확산 동향을 살펴본다. 특히, 비면허 대역의 대표적인 기술인 Sigfox, LoRaWAN, PRMA 등의 기술을 다루었으며, 면허 대역의 기술로는 3GPP의 LTE기술을 중심으로 살펴본다. 또한, LPWA네트워크 기술과 관련하여 최근 진행 중인 IETF의 표준화 동향을 정리한다.

N타입 결정질 실리콘 웨이퍼 두께 및 알루미늄 페이스트 도포량 변화에 따른 Bowing 및 Al doped p⁺ layer 형성 분석

박태준,변종민,김영도,Park, Tae Jun,Byun, Jong Min,Kim, Young Do 한국재료학회 2015 한국재료학회지 Vol.25 No.1

In this study, in order to improve the efficiency of n-type monocrystalline solar cells with an Alu-cell structure, we investigate the effect of the amount of Al paste in thin n-type monocrystalline wafers with thicknesses of $120{\mu}m$, $130{\mu}m$, $140{\mu}m$. Formation of the Al doped $p^+$ layer and wafer bowing occurred from the formation process of the Al back electrode was analyzed. Changing the amount of Al paste increased the thickness of the Al doped $p^+$ layer, and sheet resistivity decreased; however, wafer bowing increased due to the thermal expansion coefficient between the Al paste and the c-Si wafer. With the application of $5.34mg/cm^2$ of Al paste, wafer bowing in a thickness of $140{\mu}m$ reached a maximum of 2.9 mm and wafer bowing in a thickness of $120{\mu}m$ reached a maximum of 4 mm. The study's results suggest that when considering uniformity and thickness of an Al doped $p^+$ layer, sheet resistivity, and wafer bowing, the appropriate amount of Al paste for formation of the Al back electrode is $4.72mg/cm^2$ in a wafer with a thickness of $120{\mu}m$.