http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
백색광 조사를 통해 환원된 산화 그래핀 기반의 저항 메모리에 관한 연구
박종휘(Jong-Whi Park),Simon S. Park,김학성(Hak-Sung Kim) 대한기계학회 2021 대한기계학회 춘추학술대회 Vol.2021 No.06
본 연구에서는 산화 그래핀의 백색광 조사 공정을 통해 유연한 저항 메모리를 형성했습니다 [1-2]. 저항 메모리의 하부 전극은 유연한 투명 폴리이미드 기판에 구리를 증착 공정을 이용하여 형성하였습니다. GO 박막은 구리로 형성된 하부 전극 위에 증류수와 에탄올로 이루어진 산화 그래핀 용액의 스핀 코팅 방법을 통해 제작되었습니다. 산화 그래핀은 광 조사 조건 (즉, 펄스 지속 시간, 조사 에너지)의 최적화를 통해 스위칭 특성을 가지게 됩니다. 광 조사 공정을 진행한 그래핀 층에 알루미늄의 증착을 통해 상부 전극을 형성했습니다. 저항 메모리의 스위칭 동작 특성은 파라미터 분석기를 사용하여 측정되었습니다. 또한, 파라미터 분석기를 이용하여 제작된 저항성 메모리의 전기적 신뢰성 특성과 그에 따른 온/오프 비율을 평가했습니다. 그래핀 옥사이드층의 환원 정도는 X 선 광전자 분광법, 투과 전자 현미경을 사용하여 분석되었습니다. 따라서, 환원 그래핀 옥사이드/그래핀 옥사이드층 기반 저항 메모리는 WORM (Write Once Read Many Time) 특성과 (~ 10<sup>3</sup>) 온/오프 비율 및 (1000 스위칭 사이클) 내구성 특성과 같은 높은 전기적 특성을 보여주었습니다. In this study, an intense pulsed light (IPL) process for annealing graphene oxide (GO) insulator was conducted to form a flexible resistive random access memory (ReRAM) [1-2]. A bottom electrode in ReRAM structure was formed by deposition copper (Cu) on flexible, transparent polyimide (PI) substrate. The GO thin insulator layer was fabricated using spin coating method with distilled-water (D.I water) and ethanol-based solution on flexible bottom electrode. The irradiation conditions (i.e. pulse duration, irradiation energy) was optimized to obtain switching characteristics. A top electrode was formed by deposition aluminum (Al) on insulator layer. The switching operation characteristics of the ReRAM was measured using parameter analyzer. The endurance characteristics and on/off ration were evaluated. The switching mechanism of reduction degree of GO layer was analyzed using X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), so this result verifies the effect of the IPL annealing. Therefore, the r-GO/GO based ReRAM showed write-once read-many times (WORM) characteristics and high electrical characteristics such as (~10<sup>3</sup>) on/off ratio and (1000 switching cycles) endurance properties.
레이저 형광법의 치아우식증 진단감도를 증진시키기 위한 필터링 시스템 개발
이상호,박종휘,국중기,이난영,Lee, Sang-Ho,Park, Jong-Whi,Kook, Jung-Ki,Lee, Nan-Young 대한소아치과학회 2003 大韓小兒齒科學會誌 Vol.30 No.2
본 연구의 목적은 레이저 형광법을 이용해 초기 치아우식증을 광학적으로 진단하기 위해 진단감도를 높이는 것이다. 소의 치아를 STPP 인공우식병소 유발용액에 침잠시키고 다양한 깊이의 병소를 유발한 후 표면에 아르곤 레이저를 이용해 형광현상을 유도하고 여러 가지 필터를 부착한 CCD 카메라로 이와 같은 형광현상을 촬영하여 컴퓨터로 전송하였다. 컴퓨터 영상분석 프로그램을 이용하여 병소 표면에서의 광밀도를 측정하였다. 이 실험에서 사용한 필터는 노랑색, 호박색, 오렌지색, 그리고 빨강색이였으며 광밀도를 측정한 후에는 치아 시편을 절단하여 편광현미경으로 실제 조직학적 병소의 깊이를 측정하고 병소의 깊이와 여러 가지 필터를 사용하여 측정한 병소 표면에서의 광밀도간의 상관관계를 분석하여 다음과 같은 결과를 얻었다. 1. 조직학적 병소의 깊이가 증가될수록 호박색과 오렌지색 필터를 사용하여 측정한 병소 표면에서의 광밀도는 증가되었다. 2. 병소 표면에서의 광밀도와 조직학적 병소의 깊이 사이의 상관계수는 오렌지색 필터가 가장 컸으며(r=0.49), 다음 호박색(r=0.32) 노랑색(r=0.13), 빨강색(r=0.01) 순 이였다. 3. 회귀분석결과 오렌지색 필터를 사용한 경우 병소표면에서의 광밀도와 조직학적 깊이 사이에 가장 직선에 가까운 회귀방정식을 나타내었다. 이상의 결과를 종합해 볼 때 오렌지색 필터가 건전치질과 우식치질 사이의 색조대비를 잘 표현하여 진단감도를 높일 수 있는 방법으로 생각되며 이와 같은 레이저 형광법으로 치아우식증의 조기탐지는 물론 비침습적 방법으로 치아우식증의 진행정도를 평가할 수 있을 것으로 사료된다. The objective of this study is to improve the optical sensitivity of laser fluorescence for detection of incipient enamel caries. An incipient carious lesion was formed in various stages by placing an enamel specimen of a bovine tooth in STPP demineralization solution. After measuring the optical density of the lesion surface by laser fluorescence induced by argon laser and various alter of yellow(500-520nm), amber(520-540nm), orange(540-560nm), and red(560-580nm), the specimen was cut vertically to measure the depth of the lesion using a polarizing microscope. SAS statistical program was used to analyze the relationship between the optical density of the lesion suface and the depth of the lesion. The results were as follows: 1. The optical density of early carious lesion, measured by laser fluorescence with amber and orange filter, and lesion depth observed by polarizing microscope, were increased as demineralization time increased. 2. The correlation coefficient between optical density of the lesion surface and the histological depth of the lesion was the highest in orange filter(r=0.49), followed by amber(r=0.32), yellow(r=0.13) and red(0.01). 3. Regression analysis showed that the most linear relationship between the optical density and the lesion depth was existed in orange filter group. In regard above results, laser fluorescence could be considered to be reliable for optical diagnosis of dental caries.
유치에서 All-In-One system의 적용 시간과 적용 횟수에 따른 전단 결합 강도 및 혼성층 형성에 관한 연구
홍상진,박종휘,박헌동,이상호,Hong, Sang-Jin,Park, Jong-Whi,Park, Heon-Dong,Lee, Sang-Ho 대한소아치과학회 2003 大韓小兒齒科學會誌 Vol.30 No.2
본 연구는 All-In-One system의 적용 시간과 도포횟수에 따라 유치 상아질과 복합레진의 접착 강도와 혼성층에 어떤 영향을 미치는지를 규명하고자 Single bonding agent(Scotchbond Multi-Purpose Plus, 3M, USA)와 All-In-One system(Prompt-L pop, 3M ESPE, USA)를 사용하였고 수복용 레진으로 복합레진(Z-250, 3M, USA)를 사용한 결과 다음과 같은 결과를 얻을 수 있었다. 1. 전단 결합 강도는 Single bonding agent를 적용한 경우 All-In-One system을 적용한 군보다 유의하게 높게 나타났다(P<0.05). 2. Prompt L-pop을 2회, 3회 적용한 경우에 전단 결합 강도는 1회 적용한 군보다 유의하게 높게 나타났으며(P<0.05), 혼성층의 두께는 1회 적용군보다 2회, 3회 적용한 군에서 증가하였다. 3. Prompt L-pop을 15초 적용한 경우에 전단 결합 강도는 7초 적용한 군보다 유의하게 높게 나타났으며(P<0.05), 30초 적용군과는 차이가 없었다. 혼성층의 두께는 7초 적용군이 가장 얇고, 15초군과 30초군에서는 차이가 없었다. 4. Single bonding agent를 이용한 경우 두터운 $2-4{\mu}m$의 혼성층이 관찰된 반면, All-In-One bonding system(Prompt L-pop, 3M ESPE, USA)에서는 비교적 얇은 혼성층($1-2{\mu}m$)이 형성되었다. The purpose of the present study was to evaluate the patterns of hybrid layer according to the application time and the frequency and its effects on the shear bonding strength of All-In-One system in primary teeth. A single bonding agent(Scotchbond Multi-Purpose Plus, 3M) and an All-In-One system(Prompt L-pop, 3M ESPE) were applied on the dentin varying the application time and the frequency in primary teeth. Shear bond strength was measured and the patterns of hybrid layers were observed by SEM. The following results were obtained ; 1. The shear bonding strength of single bonding agent was significantly higher than that of All-In-One system(P<0.05). 2. The shear bonding strength of All-In-One system applied twice or 3 times were higher than that of applied once (P<0.05). And thickness of the hybrid layer was increased when applied twice or 3 times compared to once. 3. The shear bonding strength of All-In-One system when applied for 15 second and 30 second were higher than that of 7 second (P<0.05). And the hybrid layer thickness of 15 second and 30 second's application time were higher than that of 7 second. 4. Thickness of hybrid layer applied with single bonding agent was $2-4{\mu}m$ and that of All-In-One system was $1-2{\mu}m$.