http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Aluminum-6061과 Aluminum Foam을 샌드위치 구조로 적층한 MT(Middle Tension) 시험편의 해석적 연구
박재웅,조재웅 한국기계기술학회 2018 한국기계기술학회지 Vol.20 No.2
Light weighting is one of techniques considered importantly at designing the mechanical structure using the light weight material. This study deals with aluminum-6061 and aluminum foam which stood in the spotlight of light weight material. And the finite element method for safety evaluation has been carried out in order to prevent from the damage and fatigue fracture due to crack appearing at the mechanical structure with this material. The simulation analysis as MT(middle tension) test was carried out by using the core of aluminum foam and the material laminated with sandwich structure of Al-6061. The mechanical structure is linked together with various parts and designed as the material with hole or crack. So, MT test is one of the test methods to evaluate the fatigue fracture characteristic of material and the strength inside material with the center crack by applying the load to the part connected pin. The real material strength is thought to be evaluated through the study result of MT test analysis.
Chopper回路方式에 의한 DC 電動機 速度制御에 관한 硏究
朴在雄 大田工業專門大學 1983 論文集 Vol.33 No.-
DC motor speed control has generally been conformed by armature voltage control. Suppling electric power to control DC motor speed is variable DC power supply, and we will use the chopper instead of the variable DC power supply in this paper. Using the semiconductor chopper devices, we will find followings; improvement on accuracy of speed control, easy control of DC motor speed, small size of the power supply, improvement of the efficiency.
2관성 공진계를 갖는 직류 서보 전동기의 진동억제 제어에 관한 연구
박재웅 한밭대학교 산업과학기술연구소 1994 논문집 Vol.2 No.-
A motor system consists of two inertia resornant system connected a large inertial moment and elastic shaft. In this paper, A surpression of oscillation in resornant system with two inertial is studied. Especially, the experimental results using the Digital Signal Processing in abailable for applying to load to demand rapid response.
박재웅,김진영,이승환 대한용접·접합학회 2021 대한용접학회 특별강연 및 학술발표대회 개요집 Vol.2021 No.5
본 연구에서는 금속 적층 제조에서 주로 사용되는 cold metal transfer based wire arc additive manufacturing과 laser metal deposition에서 두 열원의 특성이 미세조직에 미치는 영향을 이해하기 위한 연구를 수행하였다. 적층에는 아크 용접기와 파이버 레이저를 사용하였고, 소재로는 316L stainless steel 와이어와 분말이 적용되었다. 적층이 진행되는 동안 pyrometer를 이용하여 적층 샘플의 온도 프로파일을 수집하여 샘플의 냉각속도, 최종응고시점 등을 평가하였다. 또한, 두 열원의 특성이 반영된 시뮬레이션 모델을 각각 개발하여 실험 결과와 비교하고 검증하였다. 시뮬레이션 모델로부터 적층물 각 층의 냉각속도 등을 계산하여 두 열원의 특징과 미세조직 간의 관계에 대해 조사하였다. 최종적으로 cold metal transfer based wire arc additive manufacturing과 laser metal deposition 공정이 적용된 316L stainless steel 응고맵을 도출하였고, 미세조직 형태를 예측할 수 있는 응고 변수 가이드를 제시하였다.