http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박성민(Seongmin Park),구다훈(Dahoon Gu),이석훈(Sukhoon Lee),정동원(Dongwon Jeong) 한국정보기술학회 2021 Proceedings of KIIT Conference Vol.2021 No.11
이 논문에서는 화상회의 시스템에서 듀얼 카메라를 이용한 사용자의 위치를 동적으로 관리하는 방법을 제안한다. 기존 연구는 단일 카메라를 이용하기 때문에 사용자 위치에 대한 동적 관리에 한계가 있다. 따라서 이 논문에서는 기존 연구의 문제점을 해결하기 위해 듀얼 카메라를 이용한 사용자 위치 동적 관리 방법을 제안한다. 제안 방법에서, 한 대의 카메라는 사용자를 스캔하여 위치 정보를 수집하고 다른 카메라는 사용자와의 대화에 사용된다. 제안 방법을 통해 화상회의 시스템에서 사용자 위치를 동적으로 관리할 수 있다. This paper proposes a method for dynamic management of user positions using a dual camera in a video conference system. The existing research has a limitation for dynamic user position management because of using a single camera. Therefore, this paper proposes a dynamic management method of user positions using a dual camera. In the proposed method, one photo sensor collects position information scanning users, and the other photo sensor is used for communication with a user. The proposed method can dynamically manage user positions in the video conference system.
IGCC 석탄 가스화기의 산화제/미분탄 비율 변화에 따른 가스온도, 전열량, 슬래그 거동의 동적 특성 분석
박성민(Seongmin Park),남준영(Joonyeong Nam),류창국(Changkook Ryu),박지은(Jieun Park),이상원(Sangwon Lee) 한국연소학회 2023 KOSCOSYMPOSIUM논문집 Vol.2023 No.5
In an integrated gasification combined cycle (IGCC) coal gasifier, the oxidant/solid ratio (OS ratio) is a critical operational variable that must be carefully controlled based on coal properties and load, However, controlling the OS ratio is challenging due to (i) frequent fluctuations in coal and oxygen flow rates, and (ii) limited information on gasifier status, wife heat duty as the only reliable parameter directly measured from the gasifier under extremely high temperatures and pressures. In this study, the dynamic response of the gasifier to changes in the OS ratio was investigated using a reduced-order model (ROM) optimized for the Taean IGCC in Korea, Different scenarios of OS ratio changes were simulated, including step changes, instant peaks, and oscillations, and the dynamic response of the gasifier was analyzed for three key performance parameters: exit gas temperature, heat duty, and slag thickness. It was found that the exit gas temperature responds immediately to changes in the OS ratio due to short gas residence time but may exhibit an overshoot because of the slower response of the slag layer on the wall. The heat duty had a characteristic response time (τ) of approximately 4 minutes to step changes in the OS ratio, reflecting the gradual change in the slag layer. The slag thickness at the slag tap had the slowest response, with τ on the order of 10 minutes, due to the slow downward flow of the slag. Because of these behaviors, the heat duty and slag thickness followed the average trend of the OS ratio rather than frequent oscillations. These results were able to explain the actual behaviors of heat duty observed in the gasifier and were helpful in improving operation control.
초분광 영상과 머신러닝을 이용한 소고기 미생물 오염도 판정기술 개발
박성민 ( Seongmin Park ),김현준 ( Hyun-jun Kim ),조철훈 ( Cheorun Jo ),김기석 ( Ghiseok Kim ) 한국농업기계학회 2022 한국농업기계학회 학술발표논문집 Vol.27 No.1
근적외선 초분광 데이터 획득 장치를 이용하여 비파괴 방식으로 소고기의 미생물 오염도를 예측하는 모델을 개발하였다. 실험 대상인 국내산 육우 시료를 15일에 걸쳐 다양한 온도 조건에 놓이게 하여 신선도 변화 및 미생물 생장을 유도하였다. 암실 환경의 데이터 획득 장치에서 초분광 데이터 큐브를 획득하였고 전통적 방법으로 total aerobic bacteria(TAB) 실험을 수행하여 소고기의 미생물 오염도에 대한 기준값을 확보하였다. 데이터 정제를 통해 스펙트럼을 추출하였고 80%의 training set와 20%의 test set로 분리하였다. 입력 변수를 선택 사용하여 차원을 축소하는 기준으로 VIP(variable importance in projection) score 개념을 도입하여 상대적으로 중요성이 낮은 데이터를 제거하고 예측 성능 변화를 확인하였다. 모델 개발에는 PLSR, SVR, ANN, 1D-CNN 기법을 적용하였다. 예측 모델 개발 결과 스펙트럼 데이터에 의한 미생물 오염도 데이터 학습이 잘 이루어지는 것을 확인할 수 있었다. 차원 축소 데이터를 사용하면 약간의 성능 하락이 발생하였으나 모델 개발의 연산량 감소 등의 이득을 감안하면 충분히 고려할 수 있는 차이이다. 개발한 모델에 대해 화학지도를 작성하여 모델의 성능을 다시 검증하고 각 실험군별 시료의 성질 차이를 파악하였다. 마지막으로 이러한 실험 과정을 재차 반복하여, 검증에 필요한 verification set 데이터를 만들고 개발된 모든 모델에 적용하여 해당 모델의 범용성을 평가하였다.
박성민(Park SeongMin),이일남(Lee IlNam),김성재(Kim SungJae) 대한전기학회 2022 전기의 세계 Vol.71 No.5
국내 전기이륜차 산업 생태계 활성화를 위한 서비스형 전기이륜차 부품 기술 동향을 분석한다. 그리고 관련하여 제품성능, 냉각방식, 안전성, 시스템 전압, 내구품질 및 IoT 연동형 모빌리티에 대한 기술 방향을 소개한다. Analyze service-type electric two-wheeled vehicle parts technology trends to revitalize the domestic electric two-wheeled vehicle industry ecosystem. In addition, technology directions for product performance, cooling method, safety, system voltage, durability quality, and IoT-linked mobility will be introduced.