http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
5G 코어 네트워크에서 Credit Value를 이용한 자원 할당 방안
박상면,문영성,Park, Sang-Myeon,Mun, Young-Song 한국정보통신학회 2020 한국정보통신학회논문지 Vol.24 No.4
최근 데이터 트래픽은 다양한 산업 발전으로 인해 폭발적으로 증가하여 기존 네트워크의 효율성 감소, 과부화 등의 문제를 야기한다. 이러한 문제를 해결하기 위해 가상화 기법을 이용하며 다양한 서비스에 최적화된 네트워크를 제공하는 네트워크 슬라이싱이 주목받고 있다. 본 논문에서는 credit value를 이용하여 자원할당을 하는 방안에 대해 제안한다. 기존 클러스터링 기법을 이용한 방안에서는 다양한 서비스에 대한 할당 요청이 들어올 때마다 클러스터 선정하기 위한 연산이 수행된다. 반면에 제안 방안에서는 클러스터의 잔여 사용량과 balancing을 이용하여 credit value를 설정하여 클러스터 선정에 필요한 연산을 수행하지 않고 slice request를 처리할 수 있도록 하였다. 제안 방안을 검증하기 위해 processing time과 balancing simulation을 진행하였다. 그 결과, 제안된 방안의 processing time 및 오차율은 clustering 기법만 사용한 방안보다 각각 약 13.72%, 약 7.96% 감소하였다. Recently, data traffic has exploded due to development of various industries, which causes problems about losing of efficiency and overloaded existing networks. To solve these problems, network slicing, which uses a virtualization technology and provides a network optimized for various services, has received a lot of attention. In this paper, we propose a resource allocation method using credit value. In the method using the clustering technology, an operation for selecting a cluster is performed whenever an allocation request for various services occurs. On the other hand, in the proposed method, the credit value is set by using the residual capacity and balancing so that the slice request can be processed without performing the operation required for cluster selection. To prove proposed method, we perform processing time and balancing simulation. As a result, the processing time and the error factor of the proposed method are reduced by about 13.72% and about 7.96% compared with the clustering method.
Na$\beta$"-Alumina-$ZrO_2$의 소결 및 그 물성에 관한 연구
박상면,김경재,허승무,Park, Sang-Myeon,Kim, Gyeong-Jae,Heo, Seung-Mu 한국재료학회 1996 한국재료학회지 Vol.6 No.3
15 vol% ZrO2가 첨가된 Na $\beta$"-alumina 복합재를 1단계와 2단계 소결법을 사용하여 제조하였다. ZrO2는 효율적으로 Na $\beta$"-alumina에 비해 약 51%정도 증가하였으며 열처리 시간에 따른 Klc값의 큰 변화는 관찰되지 않았다. 그러나 이들 복합재의 굽힘 강도 값은 열처리 시간이 60분을 초과함에 따라 점차 감소하는 경향을 나타냈다. 2단계 소결법으로 제조한 Na 복합재의 전기 전도도는 1단계 소결법으로 제조된 시편과 달리 열처리 시간에 따른 전도도 값의 분산성이 거의 없었으며, 그 값은 다결정 Na $\beta$"-alumina의 전도도와 거의 동일하였다. Na 복합재 및 이온교환법에 의해 제조한 K 복합재의 전기전도도 값은 30$0^{\circ}C$에서 각각 1.3x 10-1과 5.9x20-2Scm-1로 측정되었다.2Scm-1로 측정되었다.
Sol-gel법으로 제조된 $\textrm{PbTiO}_3$ 박막의 온도에 따른 수축 및 응력거동
박상면,Park, Sang-Myeon 한국재료학회 1999 한국재료학회지 Vol.9 No.7
In this study we investigated stress development and shrinkage of thickness for a single $PbTiO_3$(PT) layer prepared by sol-gel processing. Changes of microhardness for multideposited PT layers with temperatures are also monitored to understand the densification of thin films. Single PT layer shrank rapidly from room temperature to$ 220^{\circ}C$ yielding 83% of total shrinkage observed up to $500^{\circ}C$. A tensile stress of ~75MPa developed in an as-spun layer, and increased steadily beyond $130^{\circ}C$ until it reaches the maximum value of 147MPa at $250^{\circ}C$. The significant decrease of tensile stress in the film beyond $370^{\circ}C$ indicates that thermal expansion mismatch between the film and the substrate dominates the stress behavior in this temperature range. Microhardness of the multideposited coatings also increased rapidly above $300^{\circ}C$ regardless of the pyrolysis temperatures used. Large amount of perovskite phase formed in multideposited coatings after $550^{\circ}C$ may be due partly to enhanced homogeneous nucleation in the thicker coating. 본 연구에서는 sol-gel법으로 제조된 $PbTiO_3$ (PT) 단층박막내의 실시간 응력과 두께 수축거동, 그리고 다층박막의 미세경도를 온도의 함수로 측정하여 열처리에 따른 PT박막내의 물리화학적 변화를 설명하였다. 단층박막은 상온에서 $220^{\circ}C$까지 급격한 수축을 보였으며 총수축량의 83%가 이 온도구간에서 일어났다. as-spun된 박막 내에는 이미 75MPa의 인장응력이 존재하였으며 13$0^{\circ}C$부터 뚜렷이 증가하여 $250^{\circ}C$에서 147MPa의 최대 인장응력을 나타냈다. 인장응력의 급격한 감소가 일어나는 $370^{\circ}C$부터는 본격적으로 치밀화된 PT박막과 Si 기판과의 열팽창계수 차이가 주로 박막내의 응력을 결정하며, 이것은 다층박막의 미세경도가 $300^{\circ}C$ 이후에서 급격히 증가하는 사실로도 뒷받침된다. 한편 다층박막에서 단층박막과 달리 $550^{\circ}C$까지 열처리후 Perovskite 상이 많이 생성되었으며 이는 박막 두께의 증가에 따른 homogenous 핵생성 site의 증가 때문이라고 생각된다
박상면,최기용,박정용,김경흠,Park, Sang-Myeon,Choe, Gi-Yong,Park, Jeong-Yong,Kim, Gyeong-Heum Materials Research Society of Korea 1999 한국재료학회지 Vol.9 No.1
In this study we investigated the effects of process variables on the bond strength, and its dependency upon the interfacial chemistry when the joined $ZrO_2$ toughened $Na\beta$"-alumina to $\alpha$-alumina using B$_2$$O_3$-$SiO_2$-Al$_2$$O_3$-CaO glass sealant. We observed that bond strength is mainly determined by the strength of the glass, which, in turn, depends on the glass composition established after joining reaction. Joining at $950^{\circ}C$ for 15min yielded the highest average bond strength of 66MPa. Different types of interfacial reaction seem to occur at each interface. After joining at $950^{\circ}C$ for 15min we found that Ca and Si diffuse much deeper(~15$\mu\textrm{m}$) into the $\beta$"-alumina composite than into the $\alpha$-alumina(<1$\mu\textrm{m}$) as a result of ion exchange reaction and more effective grain boundary diffusion. Thermal expansion coefficient of the glass was found to have changed more closely to those of the $\beta$"-alumina composite and $\alpha$-alumina, which put the glass under a slight compressive stress.ressive stress.
다층 도포된 $\textrm{PbZr}_{0.53}\textrm{Ti}_{0.47}\textrm{O}_{3}$ sol-gel 박막내의 응력 거동
박상면,Park, Sang-Myeon 한국재료학회 1999 한국재료학회지 Vol.9 No.11
본 연구에서는 PbZr(sub)0.53Ti(sub)0.47O$_3$(PZT) 박막을 복수 도포함에 따른 박막내의 응력을 온도의 함수로 실시간(in situ) 측정하였으며, 응력발생의 원인에 박막의 건조, 열분해(pyrolysis), 치밀화 및 결정화 현상과 연관시켜 설명하였다. 도포직후 단층박막에 생성된 55MPa의 인장응력은 가열됨에 따라$ 300^{\circ}C$-$350^{\circ}C$에서 최대 145MPa로 증가하였으며, 박막내의 응력은 모든 온도구간에서 항상 인장응력을 나타내었더. 다층도포시 $650^{\circ}C$까지 열처리 주기를 완료한 층이 두꺼워질수록 새로 도포한 층의 영향은 점차 감소하였으며, 9층박막에 이르러서는 가열과 냉각에 따라 응력이 동일하게 변화하였다. 응력측정 결과 다층박막의 치밀화는 $350^{\circ}C$에서 시작되어 $520^{\circ}C$-$550^{\circ}C$ 부근에서 완료되는 것으로 나타났으며 치밀화가 시작하는 온도는 미세경도 측정결과와 일치하였다. $PbTiO_3$(PT)와 달리 PZT 다층박막은 Si 기판 위에서 perovskite로의 결정화가 일어나지 않았다.
골쇄보가 Streptomycin으로 손상된 생쥐의 배양 섬유모세포에 미치는 영향
박상면 ( Sang Myeon Park ),이종화 ( Joung Hwa Lee ),이강창 ( Kang Chang Lee ),양현웅 ( Hyun Woong Yang ),이병찬 ( Byung Chan Lee ),이정헌 ( Jung Hun Lee ),정종길 ( Jong Gil Jeong ),서부일 ( Bu Il Seo ),강영성 ( Young Seung Kang 대한본초학회 2003 大韓本草學會誌 Vol.18 No.1
N/A Objectives : To examine the cytotoxicity of streptomycin(STR) on cultured mouse fibroblasts, cytotoxocity-induced by STR was measured by MTT assay. Methods : Fibroblasts were cultured in the media containing various concentrations of STR for 72 hours. In addition, cytoprotective effect of Drynariase Rhizoma(DR) on STR-induced cytotoxicity in fibroblasts was examined when fibroblasts were preincubated with various concentrations of DR for 2 hours before treatment of 5 ㎍/ml STR for 72 hours. Results : STR decreased remarkably cell viability in a dependentmanner in these cultures, and also DR increased cell viability and amount of DNA synthesis damaged by STR. Conclusions : From the above results, it is suggested that STR has toxic effect in cultured mouse fibroblasts, and also DR was effective in the protection of STR-induced cytotoxicity in these cultures.