http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박동명(Dong-Myung Park),정용인(Yong-In Joung),문우용(Woo-Yong Moon),박성순(Sung-Sun Park) 한국항공우주학회 2012 韓國航空宇宙學會誌 Vol.40 No.7
본 연구는 무인항공기의 항전베이와 환경제어계통이 가지고 있는 시스템 특성을 분석하여 항전장비에 공급되는 적정 유량을 예측하였다. 예측된 결과를 바탕으로, 각 토출구에서 토출되는 유량과 유량 분포를 분석하여 환경제어계통에 대한 성능을 분석함과 동시에 항전베이에 대한 열해석을 수행하여 유량 분포의 적절성을 입증하였다. 분석된 결과에 대한 타당성을 검증하기위해 실제 환경제어계통을 이용하여 유량평형 시험장비를 구축하고, 유량평형시험을 수행하였으며, 항전장비의 시스템 요구조건에 부합되는 유량을 최종 도출하였다. 또한, 중고도 운용환경에서 시스템 요구조건의 충족여부를 검증하고 환경제어계통에 대한 열교환 성능을 입증하였다. In this study, we analyzed the system impedance of Unmanned Aerial Vehicle avionics bay and Environmental Control System(ECS), and estimated the proper air flow rate to be supplied avionics equipments. As the result of estimation, we evaluated the performance of ECS after analysing the flow balance rate and the air flow rate about each outlet port, and simultaneously decided the flow balance rate after evaluating the thermal substantiality by the thermal analysis of avionics bay. In order to verify the property of analysis result, we conducted the flow balance test using the actual avionics equipments and finally deduced the flow rate to be met system requirements of avionics equipments. Also, as the analysis results, we verified the satisfaction of system requirements at midium altitude condition and proved the performance characteristics of an Environmental Control System(ECS).
박동명(Dong-Myung Park),정용인(Yong-In JOUNG),문우용(Woo-Yong Moon),박성순(Sung-Sun Park) 한국항공우주학회 2012 韓國航空宇宙學會誌 Vol.40 No.11
본 연구는 무인항공기의 환경제어계통에 적용되는 PAO-공기 열교환기에 대한 성능검증에 관한 것으로, 계통에 대한 성능분석을 통해 열교환기 성능목표를 설정하고 상세설계와 정밀제작을 통해 목표성능에 부합되는 열교환기를 개발하였다. 개발된 PAO-공기 열교환기의 성능을 입증하기 위해 열교환기의 설계점 외에 다양한 시험조건에 대한 압력손실과 열전달 유용도, 총괄열전달계수 등에 대해 시험을 수행하였다. 수행된 결과를 바탕으로, 무인항공기용 환경제어계통에 적용된 PAO-공기 열교환기의 성능과 특성을 분석하여 개발적합성에 대해 검증하였다. In this study, the performance validation of a PAO-AIR heat exchanger developed for the ECS(Environmental Control System) of a UAV(Unmanned Aerial Vehicle) has been carried out. The performance goals of a PAO-AIR heat exchanger were established by the system schematic analysis. And a heat exchanger to be met the ECS performance was developed by a detailed design and a precision manufacture. Using the developed heat exchanger, the experiment about pressure loss and effectiveness, overall heat transfer coefficient to prove the developed PAO-AIR heat exchanger performance in various conditions as well as a design point of heat exchanger was performed and the experimental results were analyzed. As the experimental results, the performance and characteristic of a PAO-AIR heat exchanger developed for the ECS of a UAV were analyzed and the development suitability was proved.
셀프에너지 밸런싱을 고려한 Battery Management System의 구현
정민철(Min-Chul Jung),김지명(Ji-Myung Kim),최익준(Ik-Joon Choi),박동명(Dong-Myoung Park),노대석(Dae-Seok Rho) 대한전기학회 2021 대한전기학회 학술대회 논문집 Vol.2021 No.10
ESS(energy storage system)용 리튬이온전지는 수많은 셀들의 직·병렬 조합으로 구성되므로, 열화로 인해 병렬로 연결된 셀들의 SOC 상태가 서로 다른 경우, 의도치 않게 SOC가 높은 셀에서 낮은 셀로 전류가 이동하는 셀프에너지 밸런싱 현상이 발생할 수 있으며, 이러한 현상이 화재의 원인 중 하나로 추정되고 있다. 따라서, 본 논문에서는 리튬이온전지간 간의 셀프 에너지 밸런싱을 방지하는 새로운 BMS의 회로구성을 제안하고 구현한 BMS를 바탕으로 열화 및 정상 셀 unit간의 셀프에너지 밸런싱 현상을 확인한다. 셀프에너지 밸런싱 특성을 분석한 결과, 셀프에너지 밸런싱 전류가 과도하게 높아지는 경우 BMS가 확실하게 셀들의 병렬연결을 분리하여, 리튬이온전지의 안전성을 향상시킬 수 있어, 본 논문에서 제안한 BMS의 유용성을 확인하였다.
디자인공학 교육 활성화 필요성에 관한 연구 - 적층제조 가능한 휴대용 헬멧 개발 사례
신영환(Yeong-Hwan Shin),홍동욱(Dong-Uk Hong),박소현(So-Hyun Park),이예지(Ye-Ji Lee),이예지(Ye-Ji Lee),박동명(Dong-Myung Park) 대한기계학회 2023 대한기계학회 춘추학술대회 Vol.2023 No.11
This study aims identifying the demand for accelerating design engineering education as a convergence of industrial design and engineering design. With exploratory research using inductive reasoning under constructivism, a case study on portable helmet development via additive manufacturing has been conducted. The development is performed by industrial designers and engineering designers, and a design engineer is involved in the development once industrial and engineering designers’ performance results in problems. Through effective progress and outcomes in solving problems by the design engineer, the necessity of accelerating design engineering education has been verified.