http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고리형 아민이 포함된 메탄 하이드레이트의 튜닝과 가스 저장 연구
박기훈,김동현,차민준,Ki Hun Park,Dong Hyun Kim,Minjun Cha 한국화학공학회 2023 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.61 No.3
In this study, the tuning phenomena, gas storage capacity, and thermal expansion behaviors of binary (cyclopentylamine + CH<sub>4</sub>) and (cyclopropylamine + CH<sub>4</sub>) clathrate hydrates were investigated for the potential applications of clathrate hydrates to gas storage. To understand the tuning behaviors of binary (cyclopentylamine + CH<sub>4</sub>) and (cyclopropylamine + CH<sub>4</sub>) clathrate hydrates, <sup>13</sup>C solid-state NMR spectroscopy was used, and the results confirmed that maximum tuning factors for the binary (cyclopentylamine + CH<sub>4</sub>) and (cyclopropylamine + CH<sub>4</sub>) clathrate hydrates were achieved at 0.5 mol% and 1.0 mol% of guest concentration, respectively. The gas storage capacity of binary (cyclopentylamine + CH<sub>4</sub>) and (cyclopropylamine + CH<sub>4</sub>) clathrate hydrates were also checked, and the results showed the CH<sub>4</sub> capacity of our hydrate systems was superior to that of binary (tetrahydrofuran + CH<sub>4</sub>) and (cyclopentane + CH<sub>4</sub>) clathrate hydrates. The synchrotron diffraction patterns of these hydrates collected at 100, 150, 200, and 250 K confirmed the formation of a cubic Fd-3m hydrate. In addition, the lattice constant of clathrate hydrates with cyclopentylamine and methane were larger than that with cyclopropylamine and methane due to the effects of molecular size and shape.
펄스 반복률에 의한 반도체 소자의 오동작 모드와 고장률에 관한 연구
박기훈,방정주,김륙완,허창수,Park, Ki-Hoon,Bang, Jeong-Ju,Kim, Ruck-Woan,Huh, Chang-Su 한국전기전자재료학회 2015 전기전자재료학회논문지 Vol.28 No.6
Electronic systems based on solid state devices have changed to be more complicated and miniaturized as the electronic systems developed. If the electronic systems are exposed to HPEM (high power electromagnetics), the systems will be destroyed by the coupling effects of electromagnetic waves. Because the HPEM has fast rise time and high voltage of the pulse, the semiconductors are vulnerable to external stress factor such as the coupled electromagnetic pulse. Therefore, we will discuss about malfunction behavior and DFR (destruction failure rate) of the semiconductor caused by amplitude and repetition rate of the pulse. For this experiment, the pulses were injected into the pins of general purpose IC due to the fact that pulse injection test enables the phenomenon after the HPEM is coupled to power cables. These pulses were produced by pulse generator and their characteristics are 2.1 [ns] of pulse width, 1.1 [ns] of pulse rise time and 30, 60, 120 [Hz] of pulse repetition rate. The injected pulses have changed frequency, period and duty ratio of output generated by Timer IC. Also, as the pulse repetition rate increases the breakdown threshold point of the timer IC was reduced.
상용화제의 첨가에 따른 재생 폴리프로필렌/폐타이어 분말 복합체의 기계적 특성 분석
박기훈,김동학,정종기,김성길,방대석,오명훈,김봉석,Park, Ki-Hun,Kim, Dong-Hak,Jung, Jong-Ki,Kim, Seong-Gil,Bang, Daesuk,Oh, Myung-Hoon,Kim, Bong-Suk 한국자원리싸이클링학회 2014 資源 리싸이클링 Vol.23 No.1
In this study, waste polypropylene and waste ground rubber tire(WGRT) composites were prepared by using a modular intermeshing co-rotating twin screw extruder. The effect of three main factors such as WGRT contents, particle size, compatibilizers on the properties of waste PP/WGRT composites was extensively investigated. Tensile strength of the composites was decreased with an increase in WGRT contents, whereas elongation at break and impact strength were increased. The tensile strength, elongation at break and impact strength of the composites with the smaller size of the WGRT were more enhanced. Addition of PP-g-MA into waste PP/WGRT composites exhibited better tensile strength. However, elongation at break and impact strength were slightly decreased with increasing of PP-g-MA. On the other hand, tensile strength, impact strength and elongation at break of the composites were increased by adding the EPDM-g-MA and SEBS-g-MA. Especially, elongation at break was significantly increased compared to the composite with PP-g-MA. 본 연구에서는 이축 스크류식 치합형 압출기를 이용하여 재생 폴리프로필렌/폐타이어 분말 복합체를 제조하였다. 세 가지 주요 실험 변수 즉 폐타이어 분말 함량, 폐타이어 분말 크기, 상용화제의 종류 및 함량이 재생 폴리프로필렌/폐타이어 분말 복합체의 물성에 미치는 영향을 자세히 관찰하였다. 폐타이어 분말의 함량이 증가 할수록 인장강도는 감소하였으며 신장률과 충격강도는 증가하는 것이 관찰되었다. 또한 폐타이어 분말의 크기가 작아질수록 인장강도 및 신장률, 충격강도는 증가하였다. PP-g-MA를 첨가 하였을 시 복합체의 인장강도는 증가하였지만 신장률과 충격강도는 감소하였다. 반면에, 상용화제 EPDM-g-MA, SEBS-g-MA의 경우에는 복합체의 인장강도, 충격강도가 증가하였고 신장률은 PP-g-MA와 비교했을 때 매우 큰 폭으로 증가하는 것이 관찰되었다.
로봇 팔의 제어를 위한 포텐셜미터를 이용한 팔 움직임 감지 시스템 개발
박기훈,박성훈,윤태성,곽군평,안호균,박승규,Park, Ki-Hoon,Park, Seong-Hun,Yoon, Tae-Sung,Kwak, Gun-Pyong,Ann, Ho-Kyun,Park, Seung-Kyu 한국정보통신학회 2012 한국정보통신학회논문지 Vol.16 No.4
본 논문은 사람 팔의 움직임 감지 시스템을 제안한다. 기존의 모션측정 장비들은 고가이거나 혹은 특수한 장소가 따로 필요하였다. 또한 측정한 데이터들을 필요한 데이터로 변환하는 추가적인 시간도 필요하였다. 본 논문에서는 사람이 입을 수 있으며 가격이 매우 저렴하고 추가적인 데이터 변환이 필요 없는 시스템을 개발 하였다. In this paper, an arm motion sensing system using potentiometer is developed. Most motion sensing systems use optical method for the quality of motion data. The optical method needs much cost for manufacturing capture system and takes much time for correcting the captured data. And mechanical method entails relativity low cost, but it uses the wires and takes much time for correcting the data like the optical method. For solving the problems, in this paper, an arm motion sensing system is newly developed using low cost potentiometer and based on the suggested simple calculation method for the joint angles and the angular velocities. For the verification of the performance of the developed system, practical experiments were executed using real human arm motion and a robot arm. The experimental results showed that the motion of the robot arm controlled by the output of the developed motion sensing system is much similar with the motion of human arm.
동양사회의 연령주의에 대한 토론 / 박기훈(Ki Hun Park)
박기훈(Ki Hun Park) 한국노년학회 2017 한국노년학회 학술발표논문집 Vol.2017 No.국제학술
급속한 고령화에 대한 대응책으로서 일을 통한 고령자의 사회적 활용 필요성이 증가되고 있다. 고령자(노인)의 ‘일을 통한 사회참여’는 고령자의 행동과 태도에 대한 부정적 인식, 노인차별, 노인회피 등 연령주의의 주요한 문제를 완화, 해결해 줄 수 있으며 사회통합에도 크게 기여할 수 있다는 점에서 고령자의 일을 통한 사회참여는 더욱 중요해지고 있다. 특히 동아시아 국가 중 한국, 일본, 싱가폴은 고령 화의 속도가 매우 빠른 대표적인 국가이기 때문에 일을 통한 고령자의 사회적 활용이 연령이 아닌 직무와 역량에 따라 원하는 만큼 일할수 있는 노동시장환경구축을 신속하게 만들어나갈 필요가 있다.
노인 노동력활용에서 나타나는 복지와 노동의 통합 문제 연구: 일본 실버인재센터의 복지와 노동 통합을 중심으로
박기훈 ( Ki Hun Pak ) 한국지방행정연구원 2016 地方行政硏究 Vol.30 No.1
본 연구의 목적은 노인의 노동력 활용에서 나타나는 복지와 노동의 통합 문제 및 가능성을 탐구하여 우리나라의 노인일자리 사업이 현재 직면하고 있는 문제에 대한 해결 방향을 제시하는데 있다. 이를 위해 문헌연구 및 사례분석을 통해 노인노동력의 특성, 근로연계복지 분석을 통한 복지와 노동의 통합 문제점 분석, 외국의 사례를 통한 복지와 노동의 통합유형 분석을 하였다. 연구결과 첫째, 노인의 노동은 복지지향과 노동지향의 양면성이 있기때문에 노인의 노동력 활용은 복지와 노동을 동시에 충족시키는 형태로 추구해야 한다. 둘째, 근로취약계층인 노인이라 할지라도 ‘일’이 노동시장 내에서 유상으로 이루어지는 이상 노동 상품으로서의 경쟁력을 갖지 않으면 복지와 노동의 통합은 충돌을 일으키게 된다. 셋째, 실버인재센터의 복지와 노동 통합유형은 노동의 성격이 강화되었다고는 하나 여전히 복지와 노동의 변화된 통합을 지향하고 있다. 마지막으로 우리나라의 노인일자리사업이 노인 노동의 특성을 반영하여 복지와 노동의 다양한 통합의 형태를 시도하면서 계속통합을 모색할 필요가 있다는 방향성을 제시하였다. This study aims to explore the possibility of welfare and labor integration issues and provides solutions for the problems which are currently confronting the senior job programs. For this, the study analyses the characteristics of senior manpower, welfare to work, and the foreign case for clarifying the welfare and labor integration through a review of research and case study. As the result of the study, firstly, labor mobilization should be pursued to satisfy welfare and labor at the same time because senior labor has the characteristics of welfare and labor together. Secondly, if the labor is paid in the labor market, integration of welfare and labor is causing a conflict in spite of the most vulnerable senior workers. Thirdly, a silver manpower center shows variable integration of welfare and labor even though it is strengthening labor than welfare in the process of integration. In conclusion, this study suggests that senior job programs need to continue to seek integration as it attempts to integrate various forms of welfare and labor.