http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
PIDO 기술을 이용한 에어컨 실외기 배관 시스템의 다분야통합 최적설계
민준홍(Junhong Min),최동훈(Dong-Hoon Choi),정두한(Duhan Jung) 대한기계학회 2009 대한기계학회 춘추학술대회 Vol.2009 No.11
This paper describes a multidisciplinary design optimization that achieves mass reduction of an air conditioner piping system while satisfying three design constraints on the resonance avoidance, the maximum stress, and the vibration fatigue life in the pipes. In order to obtain optimized design results with various analysis fields considered simultaneously, an automated multidisciplinary analysis system was constructed using PIAnO v.2.4, a commercial Process Integration and Design Optimization(PIDO) tool. A Sequential Approximate Optimization (SAO) method was employed to effectively obtain the optimum design. As a result, the pipe mass was reduced by about 18% compared with that of an initial design while all the constraints were satisfied.
내구수명 및 K&C 특성 향상을 위한 토션빔현가액슬 최적설계
최병렬(Byung-Lyul Choi),민준홍(Junhong Min),최동훈(Dong-Hoon Choi),전광기(Kwangki Jeon),박정원(Jungwon Park),최성진(Sungjin Choi),고정민(Jungmin Ko) 한국자동차공학회 2007 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
This research proposes an automatic torsion beam axle optimization process and obtains the optimal torsion design parameters, such as thickness and shape. In order to construct an automatic analysis process, the multidisciplinary analysis models, such as modal analysis, roll mode dynamic analysis, and fatigue analysis, were equipped as batch mode. To understand a design space, the parametric study using torsion beam thickness and shape was executed. Considering the roll durability and K&C characteristics, a torsion beam axle could be optimized. For the automatic design process, the PIDO tool, called as P.I.A.n.O., are utilized. In conclusions, we could reduce a computer-aided simulation time and enhance the durability and K&C characteristics of torsion beam by optimizing thickness and shape.
염성관(Sungkwan Youm),민준홍(Min Junhong),신광성(Kwang-Seong Shin) 한국정보통신학회 2021 한국정보통신학회 종합학술대회 논문집 Vol.25 No.1
본 논문은 LoRa 통신 환경에서 UAV를 이용하여 표적을 찾는 방법을 제시한다. 제안된 방법은 사각 지대 없이 목표 신호를 찾을 수 있도록 UAV 비행 경로를 제안한다. 비행 경로는 신호 강도의 변화를 사용하여 비행 중 전송된 신호의 강도를 사용하여 변경되었습니다. 제안된 방법을 시뮬레이션으로 검증하여 3회 비행의 효율성은 높지만 목표 추적에 시간이 오래 걸리는 것을 확인했다. 목표를 찾는 데 걸리는 시간을 줄이고 시간이 중요한 요소 일 때 효율성을 높이려면 3대의 UAV를 비행하는 것이 가장 좋다. LoRa 통신은 생산 비용을 낮추고 저비용으로 시스템 구축을 가능하다. This paper presents a method to find a target using UAVs in LoRa communication environment. The proposed method proposes a UAV flight path so that the target signal can be found without blind spots. The flight path was changed by using the intensity of the transmitted signal during the flight using the variation of the signal strength. We verified the proposed method by simulation and confirmed that it takes a long time to track the target, although the efficiency of the 3 flights is high. It is best to fly three UAVs to reduce time to find target and increase efficiency when the time is a critical factor. The LoRa communication lowers the production cost and makes it possible to construct the system at low cost.
유리비드를 포함한 PDMS 마이크로칩을 이용한 고감도 감염성 병원균 측정에 관한 연구
원지영(Ji Yeong Won),민준홍(Junhong Min) 한국생물공학회 2009 KSBB Journal Vol.24 No.5
본 연구는 환경샘플 중 병원균을 진단하기 위한 목적을 가진다. 최소 챔버 칩에서 환경 샘플 중 병원균을 농축하고 mRNA를 증폭하여 효과적이고 간단한 진단방법을 고안 하였다. PDMS로 면적 1.5 cm x 1.5 cm, 높이 100 μL의 칩을 제작하여 유리에 부착시켰다. RNase에 의한 진단 오류 또는 실패를 막고자 RNase away 처리를 하고, RNA와 PDMS의 결합을 막기 위해 BSA 처리를 하였다. 수질에 있는 병원균은 매우 적은 농도로 존재하므로 농축의 과정이 필요하다. 농축의 방법에는 여러 가지가 있으나 본 연구에서는 유리 비드를 칩 내에 삽입하고 저농도의 시료를 주입 함으로서 고농도로 농축을 하는 방법을 사용하였다. 그러나 부피가 작은 칩 내에서 수행하기에는 내부 압력이 작용하여 문제가 발생하여 100 μm의 유리 비드를 사용하고 유리 비드의 칩 내부 이탈을 방지하기 위하여 댐을 만들어 농축에 가장 적합한 칩의 형태를 잡았다. 시료의 주입속도에 따라 내부 압력이 상승하여 댐의 기능이 상실하여 유리 비드가 이탈하게 되므로 그것을 방지하기 위하여 칩 내에 댐을 강화하여 만들고 내부압력 증가가 방지되는 최적의 댐을 개발하여 시료의 주입 속도 5 mL/min까지 유리 비드의 이탈을 막았다. 유리 비드에서의 RNA 농축은 pH 5에서 효과적이고 pH가 증가할수록 유리 비드와 RNA의 결합이 끊어지는 현상을 보였으므로 시료에 pH 5의 버퍼를 첨가하여 농축을 진행하고 중성의 NASBA 용액을 주입하여 유리비드에서 탈착된 농축된 고농도의 RNA를 증폭하였다. NASBA는 항온 수조에서 온도에 변화 없이 41℃에서 1시간 30분 동안 진행하며 증폭된 mRNA는 직접 확인하였다. 이 방법은 LOC 기술을 적용하여 저농도의 시료를 효과적으로 측정할 수 있도록 편리한 바이오 칩을 개발함으로써 대용량의 샘플 중 극 저농도의 대장균을 효과적으로 검출 할 수 있는 장점을 가지고 있다. Here, we demonstrated simple nucleic acid, RNA, concentration method using polymer micro chip containing glass bead (100 μm). Polymer micro chip was fabricated by PDMS (1.5 cm x 1.5 cm, 100 μm in the height) including pillar structure (160 μm (l) x 80 μm (w) x 100 μm (h), gap size 50 μm) for blocking micro bead. RNA could be adsorbed on micro glass bead at low pH by hydrogen bonding whereas RNA was released at high pH by electrostatic force between silica surface and RNA. Amount of glass beads and flow rate were optimized in aspects of adsorption and desorption of RNA. Adsorption and desorption rate was measured with real time PCR. This concentrated RNA was applied to amplification micro chip in which NASBA (Nucleic Acid Sequence B ased Amplification) was performed. As a result, E.coli O157:H7 in the concentration of 10 c.f.u./10 mL was successfully detected by these serial processes (concentration and amplification) with polymer micro chips. It implies this simple concentration method using polymer micro chip can be directly applied to ultra sensitive method to measure viable bacteria and virus in clinical samples as well as environmental samples.
정상진(Sangjin Jung),민준홍(Junhong Min),최동훈(Dong-Hoon Choi),김주호(Ju Ho Kim) (사)한국CDE학회 2010 한국CDE학회 논문집 Vol.15 No.5
A lens system for mobile phone cameras is comprised of various lenses and designed so as to satisfy design requirements for responses such as a modular transfer function (MTF). However, it is difficult to manufacture and assemble camera modules to maintain the same performance compared with the designed camera modules, because of uncertainty. We should always design a lens system by considering uncertainty that can be caused by errors in the manufacturing and assembly process of mobile phone cameras. The robust optimization offers tools of making robust decisions with the consideration of design parameters, uncontrollable parameters, and the variance of the system. Using an efficient reliability analysis method and an optimization algorithm, we obtained robust optimization results that maximize the mean of MTF and minimize the standard deviation and proposed a new robust design process for a lens system.
가변적인 샘플링을 이용한 차원 감소법에 의한 신뢰도 해석 기법
육순민(Sunmin Yook),민준홍(Junhong Min),김동호(Dong-Ho Kim),최동훈(Dong-Hoon Choi) 대한기계학회 2009 大韓機械學會論文集A Vol.33 No.9
This study provides how the Dimension Reduction (DR) method as an efficient technique for reliability analysis can acquire its increased efficiency when it is applied to highly nonlinear problems. In the highly nonlinear engineering systems, 4N+1 (N: number of random variables) sampling is generally recognized to be appropriate. However, there exists uncertainty concerning the standard for judgment of non-linearity of the system as well as possibility of diverse degrees of non-linearity according to each of the random variables. In this regard, this study judged the linearity individually on each random variable after 2N+1 sampling. If high non-linearity appeared, 2 additional sampling was administered on each random variable to apply the DR method. The applications of the proposed sampling to the examples produced the constant results with increased efficiency.