http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
민준기(Joonki Min),팽성일(Seongil Paeng),조중현(Junghyun Cho) 전력전자학회 2011 전력전자학술대회 논문집 Vol.2011 No.7
태양광 시장의 확대과 스마트 그리드에 대한 기대로 태양광 인버터의 수요는 크게 증가할 것으로 예상되며, 이와 관련하여 기존에 없었던 새로운 기능에 대한 요구가 증가되고 있다. 대표적인 요구사항은 계통연계형 태양광 시스템에 에너지 저장 기능을 가지도록 하여 야간에도 발전기능을 유지하게 하는 것과 이와 비슷하게 독립형 태양광 시스템에 계통연계 기능을 가지도록 하여 에너지 저장장치의 충전이후 계통연계 발전을 하도록 하는 개념이다. 본 논문에서는 이러한 기능의 구현을 위한 요구사항에 대해 살펴보고, 향후 제품에 적용가능한 운전 시나리오를 검토한다.
민준기(Joonki Min),최원석(Wonseok Choi) 대한전기학회 2018 전기학회논문지 P Vol.67 No.4
In this paper, we compared power generation characteristics of two MPPT algorithms, P & O and InC, applied to grid-connected solar inverters. The MPPT detects the voltage and current of the solar module string and transfers the power to the DC link. Since the grid is connected by the power conversion circuit, the grid connection control and the MPPT control influence each other. The power generation characteristics were analyzed by Psim simulation according to the MPPT cycle in the weak grid conditions.
민준기(Joonki Min),고유진(Yujin Ko),홍희기(Hiki Hong) 대한설비공학회 2019 설비공학 논문집 Vol.31 No.10
The purpose of this study was to conduct an energy performance evaluation using TRNSYS18 and test bed construction for the development of smart skin windows that can be controlled by solar radiation. For smart skin windows, clear glass (SHGC : 0.13 to 0.57) and low-e glass (SHGC : 0.06 to 0.25) according to the range of the Solar Heat Gain Coefficient (SHGC) were divided into 1.4 (W/㎡․K), 1.07 (W/㎡․K), and 0.7 (W/㎡․K), respectively. The results are as follow, compared to the standard. For U-Value 1.4 (W/㎡․K) when using clear glass, the cooling energy was -32.0% and the heating energy was 1.5%; when using low-e glass, the cooling energy was -37.0% and the heating energy was 64.4%. For U-Value 1.07 (W/㎡․K) when using clear glass, the cooling energy was -30.9%, and the heating energy was -8.5%; when using low-e glass, the cooling energy was -36.1%, and the heating energy was 45.6%. For U-Value 0.77 (W/㎡․K) when using clear glass, the cooling energy was -30%, and the heating energy was -27.8%; when using low-e glass, the cooling energy was -34.8%, and the heating energy was 20.1%. Thus, the results show that the cooling and heating energy is the most saved when using the clear glass at U-Value 0.77 (W/㎡․K).
민준기(Joonki Min),김효성(Hyosung Kim),최재호(Jaeho Choi) 전력전자학회 2005 전력전자학술대회 논문집 Vol.- No.-
This paper proposes a new neutral current reduction method using PQR instantaneous power theory on the active power filter, unbalanced nonlinear load condition in three-phase four-wire systems. For reduction of neutral line current, the single phase active power filter is used and its performance is same with the three-phase four-wire active power filter. For fully-digital implementation, ramp comparison PWM method was adopted. Simulation results verify good performance of the proposed current control strategy on the shunt APFs.
무선 센서 네트워크에서 통신량 감소를 위한 적응적 데이터 제한 기법
민준기(Joonki Min),권영미(Youngmi Kwon) 대한전자공학회 2012 전자공학회논문지 Vol.49 No.10
무선 센서 네트워크의 응용분야가 확장됨에 따라 대용량 측정 데이터의 전송에 대하여 에너지 효율성과 실시간성이 요구되고 있다. 본 논문에서는 센서 노드의 수집 데이터가 갖는 시간적 상관관계를 이용하여 센서 노드의 데이터 전송량을 감소시킴으로써, 에너지 효율성을 높이고 통신 지연을 단축시킬 수 있는 적응적 데이터 제한기법을 제안한다. 센서 노드에서는 적응적 데이터 제한기법을 이용하여 전송하는 측정값의 개수를 줄이고, 싱크 노드에서는 선형 보간법을 통하여 누락된 데이터를 복원한다. 제안하는 기법은 전송량 감소효과가 높아지더라도 데이터 품질의 큰 저하 없이 측정된 신호의 특성을 복원할 수 있다. 이 기법은 센서 데이터를 일정 구간으로 나누고, 그 구간 안에서 신호의 복잡도에 따라 싱크 노드로 전송하는 측정값의 개수를 다르게 한다. 측정 윈도우 내에서 신호의 복잡도는 기울기 변화량의 절대값이 임계치를 벗어나는 측정점의 개수를 기준으로 하였다. 제안하는 기법의 유효성을 확인하기 위해 4개의 샘플 데이터에 대하여 시뮬레이션을 통한 성능평가를 수행하였으며, 그 결과 3종의 샘플에서 6.8% 왜곡율에서 전송되는 측정값의 개수가 90%감소하는 효과를 얻었다. Current wireless sensor networks are considered to support more complex operations ranging from military to health care which require energy-efficient and timely transmission of large amounts of data. In this paper, we propose an adaptive temporal suppression algorithm which exploits a temporal correlation among sensor readings. The proposed scheme can significantly reduce the number of transmitted sensor readings by sensor node, and consequently decrease the energy consumption and delay. Instead of transmitting all sensor readings from sensor node to sink node, the proposed scheme is to selectively transmit some elements of sensor readings using the adaptive temporal suppression, and the sink node is able to reconstruct the original data without deteriorating data quality by linear interpolation. In our proposed scheme, sensing data stream at sensor node is divided into many small sensing windows and the transmission ratio in each window is decided by the window complexity. It is defined as the number of a fluctuation point which has greater absolute gradient than threshold value. We have been able to achieve up about 90% communication reduction while maintaining a minimal distortion ratio 6.5% in 3 samples among 4 ones.
15V입력 1㎾ 연료전지 시스템 전력변환장치 효율 특성
민준기(Joonki Min),김승식(Seungsik Kim),조중현(Junghyun Cho) 전력전자학회 2011 전력전자학술대회 논문집 Vol.2011 No.7
1㎾급 건물용 연료전지 시스템에서 사용되는 전력변환장치는 3가지 특징을 가지고 있다. 첫번째는 상대적으로 낮은 전압을 승압해서 사용해야된다는 점, 두번째는 입력 스위칭 전류 리플율이 5% 미만이라야 한다는 점 그리고 마지막으로 계통연계 기능이 있어야 한다는 특징을 가지고 있다. 본 논문에서 이러한 특징과 더불어 15V 입력으로 개발중인 전력변환장치의 동작 전영역의 효율 특성을 분석한다.