도로 BIM 라이브러리 기반의 실적공사비 산정체계 구축

문현석(HyounSeok Moon),김봉근(BongGuen Kim),김창윤(ChangYoon Kim),주기범(KiBum Ju) (사)한국CDE학회 2014 한국 CAD/CAM 학회 학술발표회 논문집 Vol.2014 No.2

Currently, a BIM-based takeoff quantity system is mainly focused on architectural projects. To perform this, diverse takeoff quantity methods such as an object-based automatic takeoff quantity, manual quantity and base functions of calculation have been utilizing. However, since BIM library for road projects include structural elements associated with alignment, it is necessary to establish cost estimation system interlocked with historical cost using 3D library by each length. Accordingly, the aim of this study is to develop cost estimation model with using a historical cost approach so that it can be utilized in construction planning based on the BIM library for road project. For this, based on the BIM library for road, the standardized quantity is estimated, and a process for calculating historical cost and a verification model with a 5D simulation was developed by mapping a WBS code with each BIM library object. This can be applied during the approximate cost estimation process in a project planning and an initial design phase for road projects. Besides, it is expected that these results will be utilized in constructing an optimal historical cost estimation process for project libraries.

토목시설의 표준상세도 기반 BIM 라이브러리 개발

문현석(HyounSeok Moon),주기범(KiBum Ju) (사)한국CDE학회 2013 한국 CAD/CAM 학회 학술발표회 논문집 Vol.2013 No.8

In architecture projects, BIM library has widely been using for prefabrication of products and design process. However, since the shape of structures is different by each project in civil engineering projects and a shape representation system is complicated, it is not easy to develop a standardized BIM library. To solve these issues, this study develops BIM library based on standardized 2D shop drawings for civil structures. The standardized shop drawings, which are the targets of the BIM library model, should be first selected. Besides, in order to define modeling scope with the level of general and shop drawings for each structure, LOD(Level of Detail) and breakdown structure are determined, and development methods of families of 3D object type including 2D profile and rebar through commercial software are established. With these, properties of BIM library are configured, and a utilization model of the BIM libraries is constructed for 3D modeling and a simulation using the BIM library. Therefore, this study can identify properties that are necessary when IFC schema is configured for civil engineering projects. For future, it is expected that easiness of BIM design for the civil engineering projects and generation, management, and analysis system of BIM library for road projects will be secured.

도로분야 BIM 라이브러리를 활용한 실적공사비 산정모델 구축

문현석(HyounSeok Moon),주기범(KiBeom Ju) (사)한국CDE학회 2015 한국CDE학회 논문집 Vol.21 No.2

Currently, a BIM-based quantity takeoff (QTO) system is mainly focused on architectural projects. To perform this, diverse quantity takeoff methods such as an object-based automatic quantity takeoff, manual quantity and base functions of calculation have widely been utilizing. However, since BIM library for road projects includes structural elements associated with alignment, it is necessary to establish cost estimation system interlocked with historical cost using 3D library by each unit length. Accordingly, the aim of this study is to develop cost estimation model with using a historical cost approach so that it can be utilized in construction planning based on the BIM library for road projects. For this, based on the BIM library for road, the standardized quantity is estimated, and a process for calculating historical cost and a verification model with a 5D simulation was developed by mapping a WBS code with each BIM library object. This can be applied during the approximate cost estimation process in a project planning and an initial design phase for road projects. Besides, it is expected that these results will be utilized in constructing an optimal historical cost estimation process for project libraries.

스마트폰 기압센서 퓨전을 통한 붕괴지역 매몰자의 매몰깊이 추정 모델 개발

문현석(Hyounseok Moon),김창윤(Changyoon Kim),이우식(Woosik Lee) 한국정보과학회 2016 한국정보과학회 학술발표논문집 Vol.2016 No.6

표준도 기반의 토목구조물 BIM 라이브러리 개발

문현석(HyounSeok Moon),주기범(KiBum Ju) (사)한국CDE학회 2014 한국CDE학회 논문집 Vol.19 No.1

In architecture projects, BIM library has widely been using for prefabrication of products and design process. However, since the shape of structures is different by each project in civil engineering projects and a shape representation system is complicated, it is not easy to develop a standardized BIM library. To solve these issues, this study develops BIM library based on standardized 2D shop drawings for civil structures. The standardized shop drawings, which are the targets of the BIM library model, should be first selected. Besides, in order to define modeling scope with the level of general and shop drawings for each structure, LOD(Level of Detail) and breakdown structure are determined, and development methods of families of 3D object type including 2D profile and rebar through commercial software are established. With these, properties of BIM library are configured, and a utilization model of the BIM libraries is constructed for 3D modeling and a simulation using the BIM library. Therefore, this study can identify properties that are necessary when IFC schema is configured for civil engineering projects. For future, it is expected that easiness of BIM design for the civil engineering projects and generation, management, and analysis system of BIM library for road projects will be secured.

IFC4를 기반으로 한 도로시설의 3차원 설계정보 형상변환 검증 기술 개발

문현석(Hyounseok Moon) 대한토목학회 2017 대한토목학회지 Vol.65 No.4

건설프로젝트의 작업유형별 3차원 작업공간 생성 및 간섭 최적화 방안

김현승,문현석,김창학,강인석,Kim, HyeonSeung,Moon, HyounSeok,Kim, ChangHak,Kang, LeenSeok 대한토목학회 2014 대한토목학회논문집 Vol.34 No.6

The increase of input resources, such as labor and equipment, in a construction project causes workspace interference between activities and it influences on the productivity and quality of construction activities. To solve this problem, many studies related to the workspace interference have been performed, however they verified the workspace concerning with only the geometric location of activities or generated the shape of workspace by a whole object concept not separated units of detailed operations. It is difficult for project manager to reasonably analyze the workspace conflict, because the size of workspace cannot reflect the characteristics of an activity and input time of a resource. This paper presents a methodology that can generate three-dimensional models in order to optimize the workspace shape and size by considering with the characteristics of each activity and input time of each resource. The suggested method can be used for the active BIM system that optimizes the workspace conflict without additional construction duration and for the searching algorithm of optimized moving path for construction equipment. 건설공사 프로젝트에서 인력 및 장비 등의 투입자원 증가는 공정간의 작업공간 간섭을 유발할 뿐만 아니라 프로젝트의 생산성과 품질에 영향을 미칠 수 있다. 이를 해결하기 위해 작업공간관련 연구가 수행되고 있으나, 단순히 공정들의 기하학적 위치만을 고려하여 작업공간을 검증하거나, 작업공간의 형상을 세부 작업별 분리된 형상이 아닌 일괄적 하나의 객체 형태로 생성하고 있다. 이러한 방식은 공정의 특성과 자원의 투입 시간에 따라 변화하는 작업공간의 크기를 반영하지 못하므로 합리적인 작업공간 충돌의 분석이 어렵게 된다. 이를 위해 본 연구에서는 공정과 자원의 특성에 적합한 작업공간의 형상과 크기를 생성할 수 있도록 작업공간의 3차원 모델 생성방법과 운용 시스템을 개발한다. 또한 이를 적용한 작업공간 간섭최적화 연계방안과 건설장비의 최적 이동경로 탐색 방법론을 개발하여 실무적 활용성을 검증한다.

4D CAD 시스템의 실무적 활용성 평가를 위한 BSC기반의 예비 평가 모델

김현승,문현석,강인석,Kim, HyeonSeung,Moon, HyounSeok,Kang, LeenSeok 대한토목학회 2013 대한토목학회논문집 Vol.33 No.5

Recently, BIM(Building Information Modeling) is on the rise as a customized solution for construction environment, but construction companies rarely introduce and apply BIM in the construction site. Due to such issues, the fact that empirical data for evaluating the quantitative effect of BIM application is insufficient might be an another main reason. In the end, construction companies cannot assure investment effect of BIM and therefore don't make an investment actively. To activate BIM application, the evaluation system that quantitatively assess usability of BIM needs to be developed. This study aims to suggest a methodology that evaluates the usability quantitatively according to introduction and operation of BIM by construction companies. Accordingly, this study analyzes applicability of 4D CAD by developing an evaluation index and its model with BSC(Balanced Score Card) for 4D CAD, which have high practical use among BIM techniques, and verifies the usability as the entire evaluation index of BIM. Therefore, it is expected that the developed assessment model will be utilized as the critical decision-making information in order to introduce related techniques by identifying the usability and operational issues of 4D CAD. 건설 환경에 맞춤형 대응방안으로 최근 BIM(Building Information Modeling)이 대두되고 있으나, 대다수의 건설사에서 실제 현장에 BIM을 도입하여 운용하는 사례는 저조한 실정이다. 이러한 원인으로는 다양한 건설 환경에서 BIM 적용에 의한 정량적인 효과가 파악될 수 있는 실증데이터가 부족한 점도 주요 부분이 되고 있다. 이러한 요인은 결국 BIM 투자 효과에 대한 확신을 갖지 못하게 되고, 회사의 적극적 투자도 유도하지 못하게 된다. 건설사로 하여금 BIM 적용을 유도하기 위해서는 BIM의 활용성을 정량적으로 평가할 수 있는 평가체계가 구축될 필요가 있다. 본 연구에서는 건설사들의 BIM 도입과 운용에 따른 활용정도를 정량적인 수치로 평가할 수 있는 방안을 제시하고자 한다. 이를 위해 건설분야 BIM 기술 중 실무 활용성이 높은 4D CAD를 대상으로 BSC (Balanced Score Card)에 의한 평가지표와 평가 모형을 구축하여 적용성을 분석하며, 향후 BIM 기능 전체의 평가지표로 활용성을 검증하고 있다. 이를 통해 건설업체들은 4D CAD 기술의 활용정도와 운영상 취약점을 파악함으로써 기술 도입을 위한 의사결정의 기초자료로 활용될 수 있을 것이다.

블록체인기술을 활용한 토목공사 생애주기 BIM 모델의 신뢰성 확보 방안

이재희,문현석,강인석,Lee, Jaehee,Moon, Hyounseok,Kang, Leenseok 한국건설관리학회 2021 한국건설관리학회 논문집 Vol.22 No.1

건설공사의 설계 및 시공단계에 BIM 모델의 활용성이 증대되면서 유지관리단계의 BIM 활용성 증대도 예상되고 있다. 유지관리단계에는 이미 작업이 완료된 설계 및 시공단계에 생성된 BIM 객체들을 사용하게 되므로, 활용하는 BIM 객체가 설계단계에 제작된 인증 모델인지 신뢰도 검증이 필요하다. 특히 철도시설물과 같이 토목, 건축, 전기, 신호, 궤도 등 다양한 공정과 기관으로 구성된 BIM 활용 프로젝트에서는 BIM 모델의 신뢰도가 더욱 중요도를 갖게 된다. 본 연구에서는 유지관리단계에서 사용하는 BIM 모델의 신뢰도를 확보하기 위한 방안으로 블록체인기술을 사용하는 방법을 제안하고 있으며, 이를 위해 BIM에 블록체인기술을 적용하기 위한 블록의 구조와 상세 프로세스를 구성하였다. 또한 이러한 과정을 실제 시설물의 BIM 모델에 적용하여 블록을 생성함으로써 블록체인 기술이 BIM 모델의 신뢰도 확보를 위한 도구로 사용될 수 있음을 확인하였다. As the utilization of the BIM model increases in the design and construction stages of a construction project, the utilization of BIM in the maintenance stage can also increase. In the maintenance stage, BIM objects created in the design and construction stages that have already been completed are used. Therefore, it is necessary to verify the reliability of whether the used BIM object is a certified model created in the design stage. In particular, the reliability of the BIM model becomes more important in a project such as railway facilities composed of various construction activities with civil engineering, architecture, electricity, signal, and track work. This study proposes a methodology of using blockchain technology as a way to secure the reliability of the BIM model used in the maintenance phase, and constructs the block structure and detailed process for applying the blockchain technology to BIM. In addition, by applying this process to the BIM model of an actual facility to generate a block, it was confirmed that the blockchain technology can be used as a tool to secure the reliability of the BIM model.

마커방식 증강현실기법의 건설현장 적용성 연구 (철근배근 검측업무 사례적용)

김선영,김현승,문현석,강인석,Kim, SunYoung,Kim, HyeonSeung,Moon, HyounSeok,Kang, LeenSeok 대한토목학회 2013 대한토목학회논문집 Vol.33 No.6

증강현실(Augmented Reality, AR) 기술은 현실 환경을 기반으로 컴퓨터에서 생성한 가상의 객체정보를 중첩해봄으로써 가상현실 상에서 느낄 수 없는 실감형 모델을 구현하는 기술이다. 본 연구에서는 토목공사 철근배근 작업에 증강현실 기술을 적용하는 방법론과 시스템 시제품을 구성하여 철근공사 작업의 증강현실 적용성을 검증하고 있다. 토목공사 현장의 여러 작업들 중에서 철근공사는 절차화된 매뉴얼방식보다는 숙련공의 경험적 방식에 의해 작업이 진행되는 대표적 공정이다. 이러한 공정에 증강현실을 적용하면 당초 계획도면과 비교하여 누락된 철근배근 및 상이한 배근 상태를 시각화하여 계측할 수 있으므로 시공성을 향상시킬 수 있다. 구축된 시스템은 3차원으로 모델링 된 철근객체를 실제 시공현장에 중첩하여 시각화함으로써 철근 조립공정들의 작업 이해도를 높이고, 검측단계에 활용함으로써 철근조립작업에서 발생할 수 있는 하자와 재작업으로 인한 비용증가를 억제할 수 있을 것이라 기대된다. Augmented reality (AR) technology visualizes a real type object that cannot simulate in virtual reality technology by overlapping a virtual object and real object in a computer system. This study suggests a methodology and prototype system for applying AR system to rebar distribution work in a civil engineering project. Rebar work in civil engineering project is a representative activity that is progressed by empirical approach of skilled labor rather than formalized manual. AR technology improves the constructability of rebar work because AR tool can identify missing rebars and different rebars comparing with the drawings. AR system developed in this study can enhance the understanding of rebar work using 3D modeling with real image of construction site and save construction cost by reducing reconstruction work.