http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
문인식,김영수,송인호,Moon, In Sik,Kim, Young Soo,Song, In Ho 한국건축역사학회 2020 건축역사연구 Vol.29 No.6
This paper sought to examine characteristics and differences of the construction methods and the materials of the wall repair by three command through individual command records and national documents. This paper is based on the management section of three commands(Samgunyoung), which was in charge of a repair and management of Hanyangdoseong(Seoul city wall) in 18th century. The purpose and background of the study are as follows. First, through each inscribed stones on the rampart and the parapet, it is to grasp accurately the point of change of Hanyangdoseng after the 18th century. Second, through inscribed stones, the site evidence of the repair work in the late Joseon Dynasty, it is to find out the aspects of the development process of repair and reconstruction technology of Hanyangdoseng.
송인호,김영수,문인식,Song, In Ho,Kim, Young Soo,Moon, In Sik 한국건축역사학회 2021 건축역사연구 Vol.30 No.4
Since its construction in the late 14th century, Hanyangdoseong had been carried out three major repairs and reconstructions during the 500 years of the Joseon Dynasty. In addition to the large-scale construction, small-scale construction continued until King Gojong era. In particular, in the 18th century, systematic construction management was implemented by the craftsmen and the military participated in the renovation of Hanyangdoseong in earnest, and the construction methods also developed rapidly. In the early 18th century, new construction techniques were attempted in various sections of the reconstruction work, and gradually became a common technology for repairing Hanyangdoseong in the late 18th century. The purpose of this study is to examine the characteristics and period of changes in the 18th century's construction technique, when the rapid development of Hanyangdoseong took place. To this end, the excavation results related to Hanyangdoseong, the remaining city wall, and the inscribed stones were used to identify and demonstrate the characteristics and change of the construction method.
농작물을 위한 드론 분무 농약 살포의 3차원 분석에 관한 연구
문인식(In Sik Moon),권현진(Hyun Jin Kown),김미현(Mi Hyeon Kim),장세명(Se Myong Chang),나인호(In Ho Ra),김흥태(Heung Tae Kim) 한국스마트미디어학회 2020 스마트미디어저널 Vol.9 No.4
농작물들의 크기와 형태는 매우 다양하며 생육 환경도 각기 다르다. 따라서 드론을 활용하여 농약을 살포할 때에는 각 농작물에 대한 재배 환경과 특성이 고려되어야 하며, 이에 따라 드론의 비행고도, 전진속도 등 비행 조건이 달라져야 한다. 실제로 비행 조건에 따라 농약의 액적 유동이 크게 영향을 받게 되며, 살포 영역에 큰 변화가 발생하고 이로 인해 불균일한 액적 분포가 후류에 형성되어 농약의 전달 효율성이 떨어질 수 있을 뿐만 아니라 비산에 대한 위험성이 존재하게 된다. 본 논문에서는 농업용 드론을 사용하여 특성이 다른 3가지 농작물을 선정하고 드론의 비행 조건을 각각 다르게 하여 농약을 살포했을 때 후류에서의 노즐 유동을 수치해석을 통하여 분석하였으며, 전달되는 액체의 비율을 확률 밀도 함수의 평균 제곱근을 나눈 새로운 성능지수를 이용하여 비교함으로써 작물의 특성에 따른 드론의 농약 살포 가이드라인을 구축하고자 한다. The size and shape of crops are diverse, and the growing environment is also different. Therefore, when one uses a drone to spray pesticides, the characteristics of each crop must be considered, and flight conditions such as the flight height and forwarding velocity of the drone should be changed. The droplet flow of pesticides is affected by various flight conditions, and a large change occurs in the sprayed area. As a result, an uneven distribution of liquid may be formed at the wake, and the transport efficiency will be decreased as well as there would be a risk of toxic scatter. Therefore, this paper analyzes the degree of distribution of pesticides to the crops through numerical analysis when pesticide is sprayed onto the selected three crops with different characteristics by using agricultural drones with different flight conditions. On the purpose of establishing a guideline for spraying pesticides using a drone in accordance with the characteristics of crops, this paper compares the amount of pesticides distributed in the crops at the wake of nozzle flow using the figure of merit, and the sum of transported liquid rate divided by the root mean square of the probability density function.
문인식(Moon, In Sik),송인호(Song, In Ho) 서울시립대학교 서울학연구소 2021 서울학연구 Vol.- No.83
한양도성에는 600척씩 한 자 천자문 구간 97개의 천자문 각자성석 중 15개(89번째 천자문. 위자位字 제외) 천자문 각자성석이 현존하는 것으로 알려져 왔으나, 수차례의 현장조사를 통해서 천자문 각자성석 44개를 추가로 발견하였다. 2020년 12월 현재 한양도성에는 97개의 천자문 각자성석 중 58개의 천자문 각자성석이 현존하는 것으로 확인하였다. 본 연구는 현장조사를 통해 58개의 천자문 각자성석의 실체를 확인하였으며, 그 위치를 분석하여 나머지 39개 천자문 각자성석의 위치를 추정하였다. 본 연구의 결론은 다음과 같다. 첫째, 천자문의 순서에 따라 97개로 구획된 600척의 축성구간은 암벽은 태조 시기 처음 조축당시 오도백성들이 5만8천200척을 분담하여 600척 천자문 97개 구간으로 나누어 조축하였다. 8개의 성문, 오간수문, 이간수문 등 천변과 만곡된 부분 등도 정확하게 적용되었다. 이때에는 암반구간은 천자문 600척 구간에서 제외하였다. 세종대 수축과 수리를 통하여 완성된 한양도성의 전체 길이는 5만 9천 500척이다. 600척씩 97개 구간으로 이 경우 길이는 5만 8천 200척으로 1천 300척의 차이가 있다. 이는 인왕구역의 암반뿐 아니라 백악구간의 암반 구간등도 천자문 600척 구간에서 태조시기에는 포함하지 아니하였으나 세종시기에는 암반구간도 천자문 600척 구간에 포함한 결과로 보인다. 둘째, 천자문 각자성석은 기본적으로 2가지 종류가 있다. 성자(成字), 세자(歲字) 등과 같이 천자문 한 자호만 있는 것과 일말육백척(日末六百尺), 진자육백척(辰字六百尺), 장자말육백척(藏字末六百尺), 강자육백척(崗字六百尺), 검자육백척(劍字六百尺), 영말측자육백척(盈末仄字六百尺), 거자종궐자육백척(巨字終闕字六百尺), 제말조자육백척(帝末鳥字六百尺)과 같이 앞뒤 천자문 두 개 또는 600척 또는 주자종칭자(珠字終稱字), 칭자종야자(稱字終夜字), 광자종과자(光字終果字), 진말숙자시(辰末宿字始), 인자말황자시(人字末皇字始), 장말한시(張末寒始), 한말/내자시(寒末/來字始), 여자말(呂字末), 야자종(夜字從), 열말(列末), 제말(制末)과 같이 시(始)·종(終)을 붙인 것으로 천자문 구간의 그 시작과 끝을 알 수 있는 것이다. 천자문 자호 하나로 표기된 천자문 각자성석은 대부분 그 천자문의 600척 끝 구간에서 발견된다. 이를 다시 세분화 하면 천자문 자호(~字)에 처음(始)과 끝(終/末)을 붙여 그 시종(始終)을 붙여 알 수 있게 하는 것( 천자문 자호(~字)에 六百尺을 붙여 그 시종(始終)을 알 수 있게 하는 것과 여기에 ‘시종(始終) 또는 육백척(六百尺)’이 없이 천자문 자호만 있는 것(성자成字, 세자歲字, 위자位字, 의衣, 상裳)을 포함하면 크게 3가지 종류이다. 여기에 시종(말)始終(末)중 그 하나만 붙이거나 600척을 천자문 자호의 시작과 끝을 구분한다면 5가지로 세분화할 수 있다. 셋째, 현존하는 58개의 천자문 각자성석을 통해 한양도성의 8개의 성문은 물론 남소문지 등에 대하여도 천자문 각자성석의 위치를 추론하거나 추정할 수 있는 계기가 마련됨으로써 현존하는 6개의 성문은 물론 멸실되었거나 그 위치가 이동된 혜화문, 광희문, 남소문지, 소의문과 돈의문지에 대해서도 한양도성 조축 당시 천자문 각자성석의 위치를 추론할 수 있었다. 한양도성 축성당시 97개 천자문 자호 각자중 60%인 58개를 확보하고 그 위치를 비정하였다. 600년 층위를 통하여 어떻게 변화되고 관리되었지에 대한 실증적 연구토대가 될 수 있도록 하되, 새롭게 찾은 천자문 자호 각자에 대하여는 향후 더 많은 연구가 수반되어 판독과 새로운 천자문 자호 각자의 심도 있는 연구를 기대해 본다.
조용(Yong Cho),김태현(Tae Hyun Kim),김현동(Hyun Dong Kim),문인식(In Sik Moon),송석일(Seok Il Song) 대한설비공학회 2021 대한설비공학회 학술발표대회논문집 Vol.2021 No.6
Hydrothermal energy system with Han river water as a heat source has been planned to verify the feasibility of a river water source cooling and heating system using a heat pump system in summer and winter season. A new hybrid system is planned to be developed taking into account the existing cooling and heating system of the building. 500 RT heat pumps with turbo-type radial compressors with a small thermal storage tank is installed as the main system, and a LNG gas boiler or an absorption chiller-heater is additionally installed as a hybrid system in order to supply hot water and auxiliary heat source in winter. A small thermal storage tank is also used for non-freezing operation when very low temperature river water is supplied in winter and high-efficiency operation of the system.
선택적 에미터를 적용한 고효율 결정질 실리콘 태양전지 구조 설계
임종근(Lim, Jong-Keun),이원재(Lee, Won-Jae),문인식(Moon, In-Sik),오훈(Oh, Hoon),조은철(Cho, Eun-Chel) 한국신재생에너지학회 2009 한국신재생에너지학회 학술대회논문집 Vol.2009 No.11
This paper presents the technology of selective emitter for high efficiency crystalline silicon solar cell. The effect of selective emitter is analyzed by using the simulation program for solar cell, PC1D. The selective emitter shows better spectral response in short wavelength regions compared to homogeneous emitter. Therefore, the efficiency of solar cell with selective emitter can be improved by changing the sheet resistance from 60 Omega/square to 120 Omega/square. In addition, the power loss of solar cell can be minimized by optimizing width and gap of the finger electrodes on the selective emitter.