RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
        • 학술지명
          펼치기
        • 주제분류
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        u-방재시스템 기반의 시설물 실시간 화재 모니터링

        문성우,성현진,Moon, Sung-Woo,Seong, Hyun-Jin 한국건설관리학회 2011 한국건설관리학회 논문집 Vol.12 No.1

        산업과 경제발전에 따라서 대중이 이용하는 공공 시설물은 대형화 복합화 되어가고 있으며, 재난시 시설물 사용자의 안전을 지키기 위한 방재 시스템의 역할이 더욱 중요해 지고 있다. 방재 시스템은 시설물관리에 있어서 재난극복을 위한 중요한 수단으로써 화재발생시 시설물 사용자를 안전하고, 신속하게 대피시킬 수 있는 기능을 가져야 한다. 본 논문에서는 화재 발생시 온도와 연기를 측정하여 현장상황에 대한 정보를 제공하는 Ubiquitous Sensor Network (USN) 기술 기반의 u-방재시스템을 제공한다. u-방재시스템은 화재발생시 유비쿼터스 환경에서 온도와 연기를 측정하여 현장상황에 대한 정보를 제공하는 등 독립적인 데이터 송수신 기능을 가지며, 시공간을 극복하여 현장상황을 실시간으로 모니터링 할 수 있다. 시설물 사용자는 방재시스템의 LED 전광판이 안내하는 상황별 최적의 대피경로를 따라서 화재로 부터 탈출할 수 있게 된다. 현장 적용성을 테스트하기 위해서 화재와 온도센서, 그리고 LED 전광판 등으로 구성되는 프로토타입을 개발했다. 빌딩 시설물을 대상으로 화재시 u-방재시스템의 기능을 검증했으며, 테스트 결과 USN 기반의 u-방재시스템은 화재발생 등 극한상황에서 화재대피에 필요한 데이터를 중단없이 송수신하여 시설물 사용자가 효과적으로 대피할 수 있도록 지원하는 것으로 나타났다. The building infrastructures such as high-rise buildings, shopping malls, exhibition centers, etc. are becoming larger in magnitude and more complex in complexity. Considering a large number of tenants and visitors are staying in these facilities, it is upper most important to keep those in safe from fire outbreak. In this paper, a u-Disaster Prevention System has been presented to provide effective fire evacuation when fire breaks out in building infrastructures. The ubiquitous sensor network (USN) technology was applied to detect heat and smoke from fire outbreak. The information then is transmitted wirelessly to a host computer. The tenants and visitors residing in the facility can evacuate following the instruction that is displayed in LED sign boards of the u-Disaster Prevention System. A case study shows that the ubiquitous environment can help people evacuate faster in time, shorter in distance with the assistance of the u-Disaster Prevention System.

      • KCI등재

        논문 : 다중회귀분석을 이용한 단층물질의 무게비와 전단강도의 상관성 분석

        문성우 ( Seong Woo Moon ),윤현석 ( Hyun Soek Yun ),김우석 ( Woo Seok Kim ),나종화 ( Jong Hwa Na ),김창용 ( Chang Yong Kim ),서용석 ( Yong Seok Seo ) 대한지질공학회 2014 지질공학 Vol.24 No.3

        터널 시공 중 나타나는 단층은 방향, 규모 및 강도를 예측하기 어려우면서 지반의 강도를 결정하는 중요한 요소이다. 그러나, 많은 시공 현장에서 단층대의 강도 및 암반분류를 경험적으로 적용하고 있는 실정이다. 본 논문에서는 전국 9개의 지역의 단층에서 총 109개의 시료를 획득하여 직접전단시험과 입도분석을 수행하였다. 또한 6개의 다중회귀모델을 설정하고 97개의 데이터를 이용하여 회귀분석을 실시한 후 전단강도와 단층물질의 무게비의 상관성을 분석하였다. 분석된6개의 모델을 대상으로 분석에 사용되지 않은 12개의 시험데이터를 이용하여 검증을 실시한 결과 모든 모델에서 결정계수 R2 ≥ 0.6을 보이며, Model 5에 비하여 상대적으로 수직응력을 세분화 하여 고려할 수 있는 Model 1과 3이 R2 ≥0.69으로 높게 나타났다. 향후 단층 물질의 전단강도 산정에 대한 유용한 정보를 제공할 수 있을 것으로 판단된다. The appearance of faults during tunnel construction is often difficult to predict in terms of strike, dip, scale, and strength, even though this information is essential in determining the strength of the surrounding rock mass. However, the strength and rock mass classification of fault zones are generally determined empirically on the construction site. In this study, 109 specimens were collected from fault of nine area throughout Korea, and direct shear tests were conducted and the particle distribution was analyzed to better characterize the fault zones. Six multiple regression models were established, using 97 of the specimens, to analyze the correlation between the shear strengths and weight rations of these fault materials. A verification of the six models, using the remaining 12 specimens, shows that in all of the models the coefficient of determination yielded R2 ≥ 0.60, with two models yielding R2 ≥ 0.69. These results provide useful information for determining the shear strength of fault materials in future studies.

      • KCI등재

        실내시험을 통한 단층물질의 물리·역학적 특성 분석

        문성우 ( Seong-woo Moon ),윤현석 ( Hyun-seok Yun ),서용석 ( Yong-seok Seo ),채병곤 ( Byung-gon Chae ) 대한지질공학회 2017 지질공학 Vol.27 No.1

        단층물질은 불균질하고 복잡한 메커니즘에 의해 생성되기 때문에 지역, 암종 및 구성 성분에 따라 다양한 특성을 보인다. 본 연구에서는 단층물질의 물리·역학적 특성을 규명하기 위해 국내에 분포하는 단층물질 109개를 채취하여 각종 실내시험을 실시하고, 지역, 암종 및 구성 성분에 따른 물리·역학적 특성(단위중량, 비중, 공극률, 자갈함량, 실트/점토 함량, 점토광물 함량, 내부마찰각 및 점착력)을 분석하였다. 암종별 물리·역학적 특성은 편마암의 경우 단위중량(17.1 kN/㎥)과 비중(2.73)에서 가장 높은 중앙값을 보이며, 화강암은 공극률(45.5%), 편암은 자갈함량(20.0 wt.%)과 점착력(38.1 kPa), 천매암은 실트/점토 함량(54.4 wt.%), 점토광물 함량(37.7 wt.%)과 내부마찰각(38.2°)에서 가장 높은 중앙값을 보인다. 구성 성분별 물리·역학적 특성은 단층점토가 공극률과 실트/점토 함량을 제외한 모든 인자에서 파쇄암 및 손상대보다 낮은 값을 보이는 것으로 나타났다. Fault materials has various properties depending on their areas, rock types, and components because they are formed by heterogeneous and complicated mechanisms. In this study, to understand the physical and mechanical properties of fault materials, 109 fault materials distributed in South Korea were collected to conduct various laboratory tests with them and analyze their physical and mechanical properties (unit weight, specific gravity, porosity, gravel content, silt/clay content, clay mineral content, friction angle, and cohesion) according to areas, rock types, and components. As for the physical and mechanical properties by rock type, gneiss shows the highest medians in the unit weight (17.1 kN/㎥) and specific gravity (2.73), granite does so in the porosity (45.5%), schist does so in the gravel content (20.0 wt.%) and cohesion (38.1 kPa), and phyllite does so in the silt/clay content (54.4 wt.%), clay mineral content (30.1 wt.%), and friction angle (38.2°). With regard to the physical and mechanical properties by component, fault gouge was shown to have lower values than cataclasite and damage zones in all factors other than porosity and silt/clay contents.

      • KCI등재

        왜곡 제거 시계열 매칭의 시각화 도구

        문성우 ( Seong Woo Moon ),이상훈 ( Sang Hun Lee ),김범수 ( Bum Soo Kim ),문양세 ( Yang Sae Moon ) 한국정보처리학회 2015 정보처리학회논문지. 소프트웨어 및 데이터 공학 Vol.4 No.9

        본 논문에서는 왜곡 제거 시계열 매칭의 시각화 도구를 제안한다. 시계열 매칭에서 왜곡 제거 지원은 정확한 유사 시계열 검색을 위한 매우 중요한 요소이다. 본 논문에서는 시계열에서 발생하는 잡음, 위치 이동, 진폭 조정, 선형 추세의 왜곡들을 이동평균 변환, 정규화 변환, 선형 추세 제거 기법을 사용하여 제거한 후, 시계열 매칭을 수행하고 그 결과를 시각화한다. 본 논문에서 제안하는 시각화 도구는 클라이언트-서버 모델을 기반으로 구현된다. 클라이언트는 사용자가 선택한 시계열의 왜곡을 제거하여 서버에 전달하고, 매칭 결과의 시각화를 수행한다. 서버는 R*-트리 기반의 다차원 인덱스로 왜곡 제거 시계열 매칭을 효율적으로 수행한다. 왜곡 제거 시계열 매칭의 결과는 다섯 가지 차트로 달리 표현하여 사용자가 직관적이고 쉽게 이해할 수 있도록 구현한다. In this paper we propose a visualization tool for distortion-free time-series matching. Supporting distortion-free is a very important factor in time-series matching to get more accurate matching results. In this paper, we visualize the result of time-series matching, which removes various time-series distortions such as noise, offset translation, amplitude scaling, and linear trend by using moving average, normalization, linear detrending transformations, respectively. The proposed visualization tool works as a client-server model. The client sends a user-selected time-series, of which distortions are removed, to the server and visualizes the matching results. The server efficiently performs the distortion-free time-series matching on the multi-dimensional R*-tree index. By visualizing the matching result as five different charts, we can more easily and more intuitively understand the matching result.

      • KCI등재

        강우와 연직 지진계수의 영향도 분석을 위한 석회암지역의 무한사면 안정해석

        문성우 ( Seong-woo Moon ),김형신 ( Hyeong-sin Kim ),윤현석 ( Hyun-seok Yun ),서용석 ( Yong-seok Seo ) 대한지질공학회 2020 지질공학 Vol.30 No.2

        국내에서는 비탈면을 대상으로 유사정적해석 시 수평 지진계수에 대한 적용 규정과 적용 사례들이 많이 있지만 연직 지진계수에 대한 규정이나 사례는 미비한 실정이다. 본 연구에서는 연직 지진계수의 영향도를 검토하고자 단양군 단양읍 ○○리를 대상으로 현장조사 및 실내시험을 수행하고, 이를 반영하여 무한사면 안정해석 기반의 유사정적 사면안정해석을 수행하였다. 분석 결과 지진규모가 5 이하인 경우에는 연직 지진계수의 영향이 거의 없는 것으로 분석되며, 지진규모가 6 이상인 경우에는 연직 지진계수가 안전율 1.1 이하의 불안정 영역을 크게 증가시키는 것으로 나타난다. 이러한 경향은 강우가 없는 조건보다 강우가 있는 조건에서 더욱 뚜렷하게 나타난다. In Korea, there are many regulations and cases for horizontal seismic coefficient to pseudo-static analysis of slope, but there are insufficient regulations and cases for vertical seismic coefficient. Therefore, geological investigation and laboratory tests were conducted to analyze the effect of the vertical seismic coefficient on slope stability, and pseudo-static analyses based on infinite slope stability analysis were performed by using those results. As a result, if the earthquake magnitude is less than M 5.0, the effect of the vertical seismic coefficient is not significant, and if the earthquake magnitude is more than M 6.0, the vertical seismic coefficient largely increases the unstable areas of Fs ≤ 1.1. These tendency is more distinct in rainfall condition than without rainfall condition.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼