http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
(Pb1-1.5xLax)(Ti1-yMny)O3계의 유전 및 압전성질
맹성재,정형진 한국세라믹학회 1988 한국세라믹학회지 Vol.25 No.4
The sintering phenomena, electrical resistivity, dielectric and piezoelectric properties of lead titanate ceramics modified by the partial substitution of La for Pb and Mn for Ti, (Pb1-1.5xLax)(Ti1-yMny)O3 ceramics, have been investigated. In (Pb1-1.5xLax)(Ti1-yMny)O3 system, with increasing lanthanum content, the realtive bulk density increased, but the Curie point and tetragonality (c/a) decreased. The tetragonal-to-cubic phase transition boundary existed in the range of 0.20<x<0.25. The electromechanical anisotropy (kt/kp) was observed in the tetragonal region and electromechanical coupling factor (k1) had a maximum value at x=0.05. In (Pb1-1.5xLax)(Ti1-yMny)O3 system, the electromechanical coupling factor (k1) and electrical resistivity had maximum values at y=0.01, but dielectric constant and dissipation factor had minimum values. It was concluded that lanthanum enhanced the sinterability of lead titanate and MnO2 improved the piezoelectric properties.
실시간 목표물 변경 유도무기에 적용 가능한 수신 모뎀 설계
맹성재,이종혁,김강산 한국항행학회 2019 韓國航行學會論文誌 Vol.23 No.2
In this paper, we designed and fabricated a receiving modem that can be applied to guided weapons can change real-time targets with little effect of fading. The designed modem consists of synchronous detector, timing error estimator, timing recovery, differential decoder and viterbi decoder, and it’s implemented in FPGA so that it can be redesigned and modified according to requirements. The modem board was directly converted from IF frequency to baseband and converted into digital data through ADC. It is confirmed that it is applicable to the guided weapons that changing real-time targets through simulations , measurements and test. 본 논문에서는 페이딩(fading)에 의한 영향이 적은 실시간 목표물 변경이 가능한 유도무기에 적용할 수 있는 수신 모뎀을 설계 및 제작하는데 목적이 있다. 설계된 모뎀은 동기 검출기 (sync detector), 타이밍 추정부 (timing estimator), 타이밍 복원부 (timing recovery), 차동 복호기(differential decoder) 와 비터비 복호기 (viterbi decoder)로 구성되며, 이를 FPGA (field programmable gate array)로 구현하여 요구 사항에 맞춰 재설계 및 수정이 유연하도록 구현하였다. 제작된 모뎀 보드는 중간 주파수 (IF; intermediate frequency)에서 기저대역으로 직접 변환하였으며, ADC (analog to digital converter)를 통하여 디지털 데이터로 변환하였다. 모의실험 과 측정 및 시험을 수행하여, 실시간 목표물 변경이 가능한 유도무기에 적용 가능하다는 것을 확인하였다.
맹성재,이재진,김진섭,Maeng, Seong-Je,Lee, Jae-Jin,Kim, Jin-Seop 한국전자통신연구원 1989 전자통신동향분석 Vol.4 No.3
에피층을 이용하여 소자를 제작할 때 에피층의 품질은 그 소자의 성능에 결정적인 역할을 한다. 이러한 에피층의 결정성, 불순물의 종류 및 농도, 불순물의 에너지 준위, 조성 등을 평가 할 수 있는 방법으로 PL이 널리 사용되고 있다. 본 고에서는 MBE를 이용하여 GaAs, AlGaAs 층을 성장할 때 PL로 에피층을 평가하여 성장조건을 확립하기 위한 기초자료를 마련하고자 PL의 원리와 측정방법을 조사하고 MBE로 성장시킨 GaAs의 PL의 특성을 분석 정리하였다.
맹성재,이재진,김진섭,Maeng, Seong-Jae,Lee, Jae-Jin,Kim, Jin-Seop 한국전자통신연구원 1989 전자통신 Vol.11 No.3
변조도핑 AIGaAs/GaAs 이종구조의 양자우물에 감금된 이차원 전자가스층의 생성과 그 농도 및 이동도의 파악은 이 구조를 이용한 소자의 성능을 평가하기 위해 필수적이다. 그리고소자제작에 앞서 이차원 전자가스층 생성여부의 확인은 에피층 성장공정과 제작공정을 분리 검증하여 소자 제작후에 나타나는 문제점을 해결하기 위한 진단 단계를 줄일 수 있다. 본 논문에서는 이차원 전자가스층의 확인방법을 개발하기 위하여 변조도핑 이종구조의 PL을 측정하여 분석하고 지금까지 보고된 자료를 분석하여 새로운 피크에 대한 기구해석과 검증방법을 마련하였다.
$Hg_1_xCd_xTe$를 이용한 적외선 검지소자기술
맹성재,이재진,김진섭,Maeng, Seong-Jae,Lee, Jae-Jin,Kim, Jin-Seop 한국전자통신연구원 1988 전자통신동향분석 Vol.3 No.4
적외선검출기용 반도체소자($Hg_1_xCd_xTe$)의 특성 및 응용에 대하여 조사하고, 국외의 연구현황과 국내의 문제점 및 향후 전망에 대하여 기술하였다. $Hg_1_xCd_xTe$는 조성에 따라 검지기 파장영역을 조절할 수 있으며, 그 자체에 검지부와 신호처리부를 집적할 수 있는 monolithic기술이 유망하여 앞으로 중요한 반도체중의 하나로 확립될 것이다.
이재진,맹성재,박효훈,김진섭,마동성,Lee, Jae-Jin,Maeng, Seong-Jae,Park, Hyo-Hun,Kim, Jin-Seop,Ma, Dong-Seong 한국전자통신연구원 1989 전자통신 Vol.11 No.4
n-GaAs/A1GaAs계의 화합물 반도체 접합에 형성되는 이차원 전자 가스를 캐패시턴스-전압(C-V), 각도 의존 자기저항(SdH), 전자 빔 반사(EBER)등의 측정 방법을 통하여 A1GaAs 조성비(x)는 0.281, 전도대와 가전도대의 밴드 불연속은 각각 밴드 갭($E_g$)의 69%와 31%임을 알았고, 여기에 존재하는 이차원 전자가스의 면농도는 $5.4\times10^11cm^-2, 페르미 준위 $E_F$는 25mev임을 알았다. 또한 도핑 된 A1GaAs층에서 흔히 나타나는 Franz-Keldysh진동은 불순물의 활성화도가 작으면 형성되는 전기장의 약화로 나타나지 않는다는 것을 발견하였다.