http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정봉철,남임우,류혁,김한영,이정두,Jung, Bong-Chul,Nam, Im-Woo,Ryu, Hyuk,Kim, Han-Young,Lee, Jung-Doo 대한설비공학회 2004 설비저널 Vol.33 No.3
소형가스 흡수식 냉온수 유닛의 개발 이력에 관해 소개하고자 한다. 국내의 소위 가정용 에어컨의 보급률은 40%를 넘어서고 있으며, 생활의 향상에 따라 그 보급률은 급성장하는 양상을 보이고 있다. 이러한 전기를 사용하는 가정용 냉방기의 급성장은 여름철 전력 예비율을 크게 위협하고 사계절의 구분이 확실한 한국의 경우 계절별 수급의 불균형을 보여준다. 2002년도 냉방 전력사용량(8,910㎿)은 총 전력 생산(45,770㎿)의 약 20%를 사용하기에 이르렀다. 이러한 추세로 이어질 경우 2010년 국내 냉방 총 전력은 15,250㎿로 2000년 기준전력의 약 2배에 이른다. 반면, 2002년도 가스 냉방의 사용은 LNG 총수요량의 1.2%(220천톤)에 지나지 않았다. LNG의 사용은 청정에너지로서의 겨울철 난방용 사용이 급증한 것에 비해 여름철 사용량은 없어 LNG 인수기지의 대규모 저장 탱크가 가득 차있는 양상을 보여준다.(중략)
Distance Distortion Calibration Method to Improve the Accuracy of LiDAR Distance Detection
Kimoon Kang(강기문),Hyuk Ryu(류혁),Yun-Ki Han(한윤기) 한국자동차공학회 2022 한국자동차공학회 학술대회 및 전시회 Vol.2022 No.11
This paper proposes a distance calibration method for LiDAR sensor systems. The measured distance data of the LiDAR, one of main output information, usually has intrinsic error due to distortion of time delay and distance resolution of the system. To reduce the quantity of the distance error, this paper proposes a two-step calibration method; distance offset compensation for the time delay and fragmented curve error compensation for the limitation of distance resolution. Firstly, for the distance offset compensation, the distance and correlation between measured and reference data are used for the estimation of offset. Then, we simply compensate the distorted LiDAR distance data by subtracting the estimated offset from the original distance data. For the fragmented curve, we derive an error term, and generate an error map using the error term. For the error compensation, we find errors referenced by the error map, and add them to the measured data. To verify the performance of the proposed methods, we calculate mean absolute error and computational time of compensation results. Moreover, we compared the evaluation results with those of the conventional methods. The evaluation results show that the proposed method is a more accurate and dominantly faster compensation method compared with the conventional method. The accurate results and fast computational time indicate that the proposed calibration method is effective and time-efficient, respectively.
위상고정루프를 이용한 낮은 지터 성능을 갖는 스마트 오디오 디바이스용 이중 출력 주파수 합성기 설계
백예슬(Ye-Seul Baek),이정윤(Jeong-Yun Lee),류혁(Hyuk Ryu),이종연(Jongyeon Lee),백동현(Donghyun Baek) 대한전자공학회 2016 전자공학회논문지 Vol.53 No.2
본 논문에서는 위상고정루프를 이용한 낮은 지터 성능을 갖는 스마트 오디오 디바이스용 이중출력 주파수 합성기를 제안하였다. 제안하는 주파수 합성기는 1.8 V 동부 0.18-㎛ CMOS 공정을 이용하여 설계하였다. 다양한 오디오 샘플링 주파수를 출력하기 위해 3차 시그마-델타 모듈레이션을 이용하여 fraction-N 디바이더를 설계하였다. 오디오 반도체에서 요구되는 낮은 지터 성능을 만족 시키기 위해 인-밴드 잡음을 분석, 최적화 하였다. 0.6 ㎟의 칩 사이즈를 가지고 0.6 MHz―200 MHz의 출력 주파수를 갖는다. 모든 모드에서 측정된 지터는 11.4 ps―21.6 ps 이다. A Low jitter dual output frequency synthesizer for smart audio devices is described in this paper. It has been fabricated in a 1.8 V Dongbu 0.18-㎛ CMOS process. Output frequency is controlled by 3 rd order Sigma-Delta Modulation and digital divider. The frequency synthesizer has a size of 0.6 ㎟, frequency range of 0.6―200 MHz, loop bandwidth of 350 kHz, and rms jitter of 11.4 ps―21.6 ps.