http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김태훈,유영훈,김형중,안철민,백효채,이두연,김상진,Kim, Tae-Hun,Yu, Yeong-Hun,Kim, Hyeong-Jung,An, Cheol-Min,Baek, Hyo-Chae,Lee, Du-Yeon,Kim, Sang-Jin 대한영상의학회 2003 대한영상의학회지 Vol.49 No.4
Purpose: To elucidate the sequential radiologic manifestations of reperfusion edema after lung transplantation. Materials and Methods: The study group comprised five consecutive lung transplant recipients (M:F=3:2; mean age; 47.5 years) who between July 1996 and April 2002 underwent lung transplantation procedures (four, unilateral; one, bilateral) at our institution. We retrospectively reviewed the serial postoperative radiographs obtained and characterized the lung infiltrates. Results: Lung infiltrates compatible with reperfusion edema were present in all patients (5/5). Reperfusion edema appeared on day 1 in four, and by day 2 in the other. In all transplanted lungs, infiltrates were found in the perihilar and basilar regions, and were scored as maximal on day 1 in one, day 3 in two, day 4 in one and day 5 in the other. Conclusion: The recognition of sequential radiological manifestations helps identify recognition of reperfusion edema after lung transplantation. 목적: 본 연구는 폐이식후 재관류부종의 시기에 따른 방사선적 소견을 기술하려고 한다. 대상과 방법: 본원에서 폐이식을 시행받은 5명의 수여자를 대상으로 하였다. 1996년 7월부터 2002년 3월까지 세 명의 남자와 두 명의 여자가 폐이식을 받았고, 평균 연령은 47.5세 였다. 이 중 4 명은 한쪽 폐만 이식을 받았고, 1명은 양폐 이식을 받았다. 모든 수술후 연속적인 수술후 방사선 사진을 분석하고, 폐음영을 기술 하였다. 결과: 재관류부종은 네 명에서는 수술후 1일째에 , 한 명에서는 2일째에 나타났다. 최대치의 폐음영은 한 명에서 수술후 1일에, 두 명에서 수술후 3일째에, 한 명에서 4일째에, 나머지 한 명은 술후 5일째에 있었다. 결론: 재관류부종은 모든 폐이식 이후에 일어나는 현상이며 방사선학적으로는 폐문주위와 하폐에 우세하게 분포하는 미세 망상형 또는 기강경화로 나타나며, 약 5일 이내에 최대 시기를 거치고 3주 이내에 특별한 치료없이 소실된다.
직물의 물리적 특성에 따른 쾌적성 연구(II) - 직물의 표면특성과 기공특성변화를 중심으로 -
김태훈,전병익,Kim, Tae-Hun,Jeon, Byeong-Ik 한국섬유공학회 1997 한국섬유공학회지 Vol.34 No.10
The purpose of the study was to evaluate the surface and pore characteristics of the wool fabrics. The fabrics used for the study were 100fo wool fabrics woven with variation of weft density, weaving structure, and linear density. Their surface characteristics and mean pore diameter were measured. The results of the study were as follows: 1) Mean Pore diameter (MPD) of the samples increased with decreasing cover factor and weft density, and increasing surface roughness (SMD). It showed that MPD of 30's, single yarn, and plain fabrics were lam or 2) MPD of the samples increased with water vapor transmission rate and air permeability of the samples. 3) Coefficient of friction (MIU) of the samples decreased with increasing bulk dencity and weft density. It showed that MIU of 40's, folded yarn, and satin fabrics were lower In addition, MIU of the samples increased with keeping warmth ratio. 4) SMD of the samples decreased with increasing cover factor and weft density. It showed that SMD of 40's, folded yarn, and satin fabrics were lower. 5) As SMD of the samples increased, there were lots of larger pore in the structure, and thus water vapor transmission rate and air permeability of the samples increased.
스타이렌 공중합체의 물리적 특성 및 콘택트 렌즈로의 응용
김태훈,예기훈,성아영,Kim, Tae-Hun,Ye, Ki-Hun,Sung, A-Young 대한화학회 2009 대한화학회지 Vol.53 No.6
Styrene은 중합체와 공중합체로 널리 사용되어져 왔으며, 고 굴절률을 가지고 있기 때문에 콘택트렌즈 재료로 유용하게 사용된다. 본 연구는 styrene을 교차결합제인 EGDMA (ethylene glycol dimethacrylate)와 HEMA (2-hydroxyethyl methacrylate) 그리고 개시제인 AIBN (azobisisobutyronitrile)을 사용하여 공중합 하였다. 공중합한 안 의료용 재료의 물리적 특성을 측정한 결과 굴절률 1.4412-1.4628, 함수율 20-35%, 가시광선 투과율 82.6-87.0%, 인장강도 0.143-0.344 Kgf를 나타내었다. Styrene의 비율이 증가할수록 굴절률과 인장강도는 증가하였으며, 함수율은 감소하였다. 본 실험결과로 볼 때 생성된 공중합체는 기능성을 가진 고성능 콘택트렌즈 재료로 사용될 수 있을 것으로 판단된다. Styrene is broadly used as a polymer and a copolymer and is useful in manufacturing contact lenses due to its high refractive index. This study used styrene with the cross-linker EGDMA (ethylene glycol dimethacrylate), HEMA (2-hydroxyethyl methacrylate) and the initiator AIBN (azobisisobutyronitrile) for copolymerization. Measurement of the physical characteristics of the copolymerized material showed that the refractive index is 1.4412 - 1.4628, water content 20 - 35%, visible transmittance 82.6 - 87% and the tensile strength 0.143 - 0.344 Kgf. Also, measurements showed that the refractive index and tensile strength increased while the water content decreased as the ratio of styrene increased. Based on the results of this study, the produced copolymer can be estimated to be suitable for use as a material for high performance functional contact lenses.
김태훈,정지원,Kim, Tae-Hun,Jung, Ji-Won 한국정보통신학회 2014 한국정보통신학회논문지 Vol.18 No.5
수중에서의 음향 통신의 성능은 신호의 다중경로 전달과정에 의해 발생하는 지역 확산 현상으로 인하여 인접간섭의 영향을 받는다. 그리고 음파를 이용한 주파수의 제한으로 인하여 낮은 전송 속도로 통신을 한다. 따라서 전송속도의 향상과 함께 인접간섭을 제거하기 위하여 수중 통신에 적합한 시공간 부호화 기술과 등화기 기술, 채널 부호화 기술이 필요하다. 본 논문에서는 이러한 기술들을 시뮬레이션을 통하여 MIMO 수중 통신 시스템에서 최적의 터보 등화 기법을 이용한 복호구조를 제안한다. 각 모듈별 시뮬레이션을 통한 성능결과 본 논문에서 제안한 계층적 시공간 부호화 방식 기반의 터보 등화 기법을 이용하면 일반적인 수중 통신 보다 성능이 우수함을 알 수 있다. The performance of underwater acoustic(UWA) communication system is sensitive to the Inter-Symbol Interference(ISI) due to delay spread develop of multipath signal propagation. And due to limited frequency using acoustic wave, UWA is a low transmission rate. Thus, it is necessary technique of Space-time code, equalizer and channel code to improve transmission speed and eliminate ISI. In this paper, UWA communication system were analyzed by simulation using these techniques. In the result of simulation, the proposed Turbo Equalization method based on layered Space Time Codes has improved performance compared to conventional UWA communication.