http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유도모터의 저 스위칭 소음 구동을 위한 카오스 2중 텐트사상 RPWM기법
김준형(J.H. Kim),정영국(Y.G. Jung),임영철(Y.C. Lim) 전력전자학회 2004 전력전자학술대회 논문집 Vol.- No.-
본 연구에서는 일반적으로 사용되고 있는 랜덤 수 발생 알고리즘인 LCG(Linear Congruential Generator)대신에 카오스 2중 텐트사상(Tent Mapping)에 의한 저 스위칭 소음 유도모터구동 시스템을 제안하였다. 2중 텐트사상에 의한 랜덤 수 발생을 위해 카오스 발생 영역인 λ=0.99에서의 2중 텐트사상의 분기도(Bifurcation Diagram)를 사용하였다. 카오스 랜덤수와 3상 기준 정현파는 80C196 마이크로 콘트롤러가 전담하고 있으며, 80C196으로부터 발생된 카오스 랜덤 수에 의하여 MAX038로부터 랜덤 주파수의 삼각파 캐리어가 발생된다. 기계적인 소음이 없는 ECB(Eddy Current Brake)를 부하로 사용한 3상 유도모터 구동 장치를 제작하여 본 연구의 타당성을 입증하였다.
폴리머 콘크리트 박막 교면포장 적용을 위한 실제 교량 정적 해석
정영도(Jeong Young Do),김준형(Kim Jun Hyung),이석홍(Lee Suck Hong),정진훈(Jeong Jin Hoon) 대한토목학회 2011 대한토목학회논문집 D Vol.31 No.3D
본 논문에서는 폴리머 콘크리트 박막 교면포장의 적용성을 알아보기 위한 하나의 방법으로 SMA(Stone Mastic Asphalt) 교면포장으로 시공된 실제 교량 및 이와 동일한 조건에서 교면포장을 박막의 폴리머 콘크리트로 대체한 가상의 교량에 대해 정적 해석을 실시하였다. 다양한 교량형식에 대한 평가를 위하여 SMA 교면포장으로 시공된 PSC(Prestressed Concrete) 거더교, 강박스 거더교, PSC 박스 거더교, RC(Reinforced Concrete) 라멘교를 해석하고 비교하였다. 바닥판과 교면포장은 완전히 접착된 것으로 가정하였으며 시공 중 발생한 응력과 처짐은 무시하고 교면포장의 자중과 차량하중으로 인하여 발생된 응력과 처짐을 분석하였다. 해석 결과 가벼운 단위중량과 앓은 두께로 포장지중이 더 작았던 폴리머 콘크리트를 사용한 교량의 응력과 처짐은 SMA를 시용한 교량보다 작은 것으로 해석되었다. 차량하중으로 인해 폴리머 콘크리트를 사용한 교량에 발생한 응력과 처짐은 앓은 포장 두께로 인한 단면이차모멘트의 감소 때문에 SMA를 사용한 교량보다 크게 나타났다. 포장의 지중과 차량하중이 동시에 작용하는 경우에는 지중 감소효과가 지배적으로 작용하여 폴리머 콘크리트를 사용한 교량의 응력과 처짐이 더 작게 나타났다. 향후 교면포장의 공용성 조사와 경제성 분석을 통한 비교 연구가 필요한 것으로 판단된다. In this paper, actual bridges constructed with SMA (Stone Mastic Asphalt) deck pavement and virtual bridges substituted the deck pavement with polymer concrete under the same conditions were statically analyzed to investigate applicability of the thin polymer concrete bridge deck pavements. PSC (prestressed Concrete) girder bridge, steel box girder bridge, PSC box girder bridge, and RC (Reinforced Concrete) rahmen bridge constructed with the SMA deck pavement were analyzed and compared to evaluate various types of the bridge. The bridge deck and pavement were assumed to be fully bonded and the stress and deformation during the construction were ignored while those due to pavement weight and vehicle loading were analyzed. According to the analysis results, the stress and deformation of the bridges using the polymer concrete due to the pavement weight were smaller than those using the SMA because of smaller self weight due to lighter unit weight and thinner thickness of the pavement. The stress and deformation of the bridges using the polymer concrete due to the vehicle loading were larger than those using the SMA because of the smaller area moment of inertia due to the thinner pavement thickness. In case that the pavement weight and vehicle loading applied simultaneously, the stress and deformation of the bridges using the polymer concrete were smaller because effect of self weight reduction was more dominant. Investigation of performance of the bridge deck pavement and analysis of economical efficiency are warranted.
전동기의 소음 저감을 위한 카오스 2중 텐트 사상 PWM기법
김준형(Jun-Hyeoung Kim),정영국(Young-Gook Jung),임영철(Young-Cheol Lim) 한국조명·전기설비학회 2008 조명·전기설비학회논문지 Vol.22 No.12
본 연구에서는 전동기 소음 저감을 위한 카오스 2중 텐트 사상(double tent mapping)PWM 기법에 대하여 고찰하였다. 카오스 수 발생은 2중 텐트 사상의 카오스 말생 영역인 λ=0.99에서의 분기 트리(bifurcation tree)를 사용하였다. 카오스 수 발생은 80C196 마이크로 콘트롤라가 담당하고 있으며, 80C196으로부터 발생된 카오스 수와 MAX038 주파수 변조기를 이용하여 카오스 특성을 갖는 삼각파 캐리어가 발생한다. 2.5[A] 부하조건에 대한 1.5[kw]급 유도 선동기 구동 시스템에 제안된 방법과 종전의 고정 주파수 방법을 적용하였으며 각각의 방법에 대하여 캐리어 및 전동기 전압 그리고 3차원 스위칭 소음의 고조파 스펙트럼을 비교 검토하였다. 그 결과 제안된 방법의 고조파 스펙트럼은 특정 주파수애 집중되지 않는 카오스 분포를 하였으며, 이로 인하여 전동기에서 발생하는 날카로운 스위칭 소음이 저감됨을 알 수 있었다. This paper proposes a chaotic double tent mapping PWM scheme for mitigation the acoustic noise of a motor drive. The chaos area λ=0.99 in bifurcation tree of the double tent mapping is used for generating the chaotic numbers. A 80C196 micro-controller is employed for generation of chaotic numbers, and the triangular carrier with chaotic frequency is obtained by using a 80C196 micro-controller and a MAX038 frequency modulator. The experiments are executed with a 1.5[kw] induction motor drive under the 2.5[A] load condition. As results, the experimental results show that the carrier, voltage and 3-D switching noise spectra of the proposed scheme is spread over the chaotic frequency range with no specific frequency concentration. Thereby, the shrill acoustic noise radiated from a motor drive is reduced by the proposed scheme.
한성렬,전승경,김준형,정영득,Han, Seong-Ryeol,Jun, Seung-Kyeong,Kim, Jun-Hyeong,Jung, Yeong-Deu 한국금형공학회 2008 한국금형공학회지 Vol.2 No.1
Recently, the demand of high-productivity injection mold increases since the consumption of packaging grows in the world. Stack mold is composed of more than two molds and it has very high productivity and economic efficiency. In this study, stack mold was developed to improve productivity of vehicle fixed weather strip with TPV materials and to investigate the characteristic of injection molding using CAE.