http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
LCD 제조공정의 혼합폐산으로부터 일인산암모늄 제조 기술
이하영(Ha-young Lee),이상길(Sang-gil Lee),박성국(Sung-Kook Park),김주한(Ju-han Kim),김주엽(Ju-yup Kim),김준영(Jun-young Kim) 한국청정기술학회 2009 청정기술 Vol.15 No.4
LCD 제조공정에서 배출되는 질산과 초산, 인산, 그리고 Al과 같은 금속이온을 함유한 폐에칭액으로부터 진공증발과 확산투석을 이용하여 고순도 인산을 회수하여 인산암모늄을 제조하고자 하였다. 진공증발을 이용하여 질산과 초산을 제거하였다. 진공도가 -650 mmHg인 경우에는 온도 413 K 이상에서 완전 분리되었고, 진공도가 -700 mmHg인 경우에는 온도 393 K 이상의 영역에서 완전히 분리되었다. 그리고 진공도 -730mmHg의 경우는 온도 383 K 이상에서도 완전 분리가 가능하였다. 99%의 질산과 초산을 제거하였으며, 확산투석을 이용하여 약 97.5% 이상의 Al을 제거하였다. 이렇게 얻어진 고순도 인산과 수산화암모늄을 이용하여 일인산암모늄을 제조하는 공정에서 급격한 발열반응을 제어하고 안정된 적정조건을 도출하기 위하여 수산화 암모늄의 농도, 적정 몰비, pH, 온도 등의 반응인자를 조절하여 회수율 약 90%의 일인산암모늄을 제조하였다. The waste solution discharged form the LCD(Liquid Crystal Display) manufacturing process contains phosphoric acid, nitric acid, acetic acid and metal ions such Al and other impurities. In this study, vacuum evaporation and diffusion dialysis was developed to commercialize an efficient system for recovering the high-purity phosphoric acid and manufacturing monoammonium phosphate. By vacuum evaporation, almost 99% of nitric and acetic acid was removed. Also, by diffusion dialysis, about 97.5% of Al was removed. Monoammonium phosphate was manufactured from purified phosphoric acid and ammonium hydroxide. In order to get the optimum manufacturing condition, the molar ratio of ammonium hydroxide and phosphoric acid, pH and temperature was controlled. Using this optimum condition, we obtained the recovery rate of monoammonium phosphate of about 90%.
황진하,안승수,김주한,Hwang, Jin Ha,An, Seoung Su,Kim, Ju Han 대한토목학회 2013 대한토목학회논문집 Vol.33 No.1
본 논문은 통계적 품질관리 기법을 활용하여 건전한 교량의 고유진동수비와 응답비 관리범위를 찾고, 그에 준거한 응답보정 방법을 제시하였다. 이를 위해 본 연구는 재하 시험 및 해석으로부터 도출된 구조형식별 정 동적 응답 특성에 대한 기술통계분석, 정규성 검정, 분산분석 등을 수행하였다. 제안된 방법은 실제 진단 사례에 근거하고 통계적 품질관리 기법을 활용함으로써 응답보정 및 내하력 평가를 위한 과학적 기준과 체계적 절차를 제공할 수 있을 것으로 기대한다. This paper presents the response calibration method based on quality control range, which is established from the concept and method of statistical quality control for natural frequency ratio and response ratio. To this end, statistical analysis including descriptive statistics analysis, normality test, ANOVA were performed for response characteristics obtained from loading tests and structural analysis for more than hundred and thirty well-conditioned bridges. Suggested method is based on real structural integrity evaluation case studies and statistical quality control approach, in this respect it is expected to provide scientific criteria and systematic procedure for response calibration and load carrying capacity assessment.
김옥구,김선하,김주한,배균섭,김화정,박병주,Kim, Ok-Gu,Kim, Seon-Ha,Kim, Ju-Han,Bae, Kyun-Seop,Kim, Hwa-Jung,Park, Byung-Joo 대한임상약리학회 2003 Translational and Clinical Pharmacology Vol.11 No.2
Despite the importance of clinical trials in developing a new drug, paper based clinical trial is still costly and time-consuming. The process of a clinical trial has not kept up with available information technologies. We identify two major problems in paper based clinical trial. They are time delay and poor error control. To solve the problems information technologies are used in certain areas of clinical trial, but it is still restricted and partially helpful. This paper first explains the two problems in the process of paper based clinical trial and introduces four available information technologies that can help clinical trial in implementing electronic clinical trial (ECT), where information technologies are used in the whole process of clinical trial.
박은하(Eun-Ha Park),김주한(Ju-Han Kim),김재훈(Jae-Hun Kim),김윤형(Yoon-Hyoung Kim),한상옥(Sang-Ok Han),금영범(Young-Bum Keum),정귀성(Kwi-Seong Jeong),고형진(Haeng-Zin Ko) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
본 연구에서는 수소 연료전지의 엔드플레이트와 외부 연결 부분의 금속을 진동시험기를 이용하여 접촉저항을 측정하였다. 수소 연료전지의 집접판에서의 전류밀도의 변화와 온도 분포의 변화를 비교해 볼 수 있었으며, 접촉저항을 측정 할 수 있었다. 진동시험기는 5∼50 ㎐의 범위까지 설계하였으며 진동에 대한 접촉저항의 변화도 확인 할 수 있었다.