http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
직장암 절제술 후 문합부 누출에 대한 복강경 수술과 개복술의 비교연구
이두석,육의곤,최성일,이두한,김도선,문홍영 대한대장항문학회 2007 Annals of Coloproctolgy Vol.23 No.5
Purpose: This study is to compare the rate and pattern of anastomotic leakage (AL) for rectal cancer after laparoscopic vs. conventional open surgery at high and low rectal anastomosis and to evaluate whether the number of linear staples used for distal rectal resection is related to AL in laparoscopic group. Methods: One hundred ninety-seven patients who underwent a curative resection for rectal cancer between March 2002 and February 2006 were studied retrospectively (107 laparoscopic, 90 open). The proportions of patients with anastomosis above vs. below 5 cm from AV were not different between the laparoscopic and the open groups; (above/below: 54/53 and 41/49, respectively, P=0.57). The protective stoma rate, the overall rate of AL, the rate of AL according to the height of the anastomosis, and the number of distal linear staples were evaluated for both groups. Results: Clinical AL occurred in 11 of 107 patients (10.3%) for the laparoscopic group and in 5 of 90 patients (5.6%) for the open group. The rates of AL in patients without protective stoma were not significantly different for high rectal anastomosis (6.0% for laparoscopic vs. 2.6% for open, P= 0.63) and for low rectal anastomosis (25.8% for laparoscopic vs. 12.1% for open, P=0.21). The risk of AL was 4.9 times higher when 3 linear staples were used than when 2 linear staples were used in the laparoscopic group. Conclusions: There was no statistical difference in AL between the laparoscopic group and the open group. The rate of AL could be reduced by using fewer linear staples for distal rectal resection in the laparoscopic group.
BIM/IFC를 이용한 구조해석용 건물정보의 데이터베이스 관리
김이두(Kim, E-Doo),손인락(Son, In-Rak) 대한건축학회 2013 大韓建築學會論文集 : 構造系 Vol.29 No.9
BIM technologies in fields of architecture have reduced the loss of information, saved time and increased the efficiency of the practice than conventional 2D drawing based works. These technologies are being applied mainly to architectural planning and design, construction, collisions of architectural subsystems, estimation, etc. But few researches to manage structural analysis information for structural engineering were done, even though a lot of efforts to utilize this IFC File has done in other architectural fields. This paper present some ways to design a database for managing information after analyzing structural design stages and referencing the IFC schema, and to construct a initial database from reading an existing IFC file. To implement these ideas, a computer program which can read in the IFC file and manage the structural information on database and then, display all kinds of information with visualization tools is developed. This database approach will give possibilities to share building information and collaborate between various fields of building engineering.
건물상세정보를 포함한 3-D GIS용 캠퍼스 모델의 구축
김이두(Kim, E-doo),고일두(Goh, Il-du) 한국도시설계학회 2011 도시설계 : 한국도시설계학회지 Vol.12 No.3
본 연구는 최근 건축실무에 적용되고 있는 BIM의 건물상세정보를 활용하여 3-D GIS상에서 건물전체 또는 건물구성요소별로 필요한 정보를 관리할 수 있는 효율적인 방법을 제시한다. 이를 위하여 BIM으로부터 국제표준정보모델 IFC 파일형태로 건물상세정보를 저장하고 이 파일의 정보를 3-D GIS로 읽어들임으로써, 건물외형 및 외부공간에 중점을 두는 현재 수준의 GIS를 건물의 내부공간이나 개별부재 단위까지도 정보를 다룰 수 있는 높은 수준으로 향상시키고자 한다. 본 연구의 구체적인 적용사례로 3차원 지형과 건물외피모델로 지구단위 규모의 대학교 캠퍼스 모델을 구축하고 여기에 BIM으로 모델링된 건물상세모델을 추가하여, 건물상세모델인 경우에는 건물의 구성요소별로 관리할 수 있는 시스템을 구현하고 그 실행결과를 보여준다. 본 연구는 건축설계사무소, 엔지니어링 업체, 또는 건설회사에서 작성한 BIM 정보로부터 건물형태와 내부공간 모델을 GIS상에서 곧바로 생성할 수 있는 방법을 제시하므로, 건축허가/심의/준공 단계에서 3차원 건물모델을 납품받아 도시계획 및 건축심의 등의 행정업무에 실제로 활용될 수 있는 가능성을 제공한다. This paper presents an effective method for acquiring detailed building models from BIM, which are currently utilized in building industry, and managing the building information as a whole or individually on 3-D GIS. A neutral file format of IFC was used to import the geometry and other kinds of information of building elements and spaces of BIM into 3-D GIS. Thus, this approach enables the users to handle the detailed building information at building component and room levels according to their specific needs. As an example of implementation, a virtual campus with a geographical terrain model and building facades was constructed and the detailed building model was directly imported to be managed on this campus model. This approach saves time and efforts for preparing building-related information of virtual cities, so that it may be used at various stages of administrative processes for getting architectural permission and city planning.
녹비작물 세스바니아 콩명나방(Maruca testulais) 발생 및 효율적인 방제법
이건휘,백채훈,노태환,심형권,이두구,김시주 한국응용곤충학회 2010 한국응용곤충학회 학술대회논문집 Vol.2010 No.10
최근 녹비작물로 활용이 기대되는 세스바니아(Sesbania exaltata)에 발생되어 피해를 주고 있는 콩명나방(Maruca testulais)의 발생, 피해 및 방제법을 조사한 결 과; 간척지와 숙답화된 두 조사지역에서 콩명나방(Maruca testulais)의 발생 및 피 해는 6월 하순부터 발생되기 시작하여 9월 상순에서 중순까지 큰 피해를 주었다. 피해양상은 주로 잎을 말고 그 속에서 가해하는데 심한 경우 꽃잎까지 말아서 가 해한다. 두 조사지역 중에서 숙답화된 지역 보다는 간척지역에서의 피해엽률이 높 았다. 세스바니아 콩명나방에 대한 우수약제를 선선발하기 위하여 루페뉴론 유제 등 4가지 약제를 대상으로 방제효과를 조사한 결과, 공시약제 모두 90% 이상의 방 제효과를 보였다. 또한, 콩명나방에 대한 효율적인 방제시기 및 방제횟수는 유충 의 발생이 늘어나는 7월 상순에 1회 방제로 효율적으로 관리할 수 있었다
백채훈,이건휘,노태환,강미형,이두구,김시주 한국응용곤충학회 2010 한국응용곤충학회 학술대회논문집 Vol.2010 No.05
시판되는 몇 가지 친환경유기농자재를 대상으로 실내에서 혹명나방(Cnaphalocrocis medinalis), 벼애나방(Narana aenescens), 멸강나방(Pseudaletia unipuncta) 및 줄점팔랑나비(Parnara guttata)의 살충효과를 조사하였다. 19개 친환경유기농자재에 대해 각 나방류 2-3령 유충의 각각 처리 후 1, 3일차의 실내 살충효과를 조사한 결과, 90% 이상의 살충률을 나타낸 친환경유기농자재는 혹명나방은 1일차에서 EFAM-B 1개, 3일차에서는 EFAM-A 등 10개, 벼애나방은 1일차에서 EFAM-A 등 11개, 3일차에서는 EFAM-A 등 12개, 멸강나방은 1일차에서 EFAM-A 등 3개, 3일차에서는 EFAM-A 등 9개, 줄점팔랑나비는 1일차에서 EFAM-A 등 12개, 3일차에서는 EFAM-A 등 15개였다. 또한, 국내에 자생하는 은행나무의 부위별 추출물에 대한 벼멸구 약충의 살충효과를 조사한 결과, 뿌리 > 잎 > 가지의 순으로 살충효과가 높았다.