http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김요섭,이주열,임윤희,신재란,박병현,김윤신,Kim, Yo-Seop,Lee, Ju-Yeol,Lim, Yun-Hui,Shin, Jae-Ran,Park, Byung-Hyun,Kim, Yoon-Shin 한국응용과학기술학회 2014 한국응용과학기술학회지 Vol.31 No.3
In order to minimize a building energy consumption with ventilation, a development of smart ventilation system is very important. In this study, a dry adsorbent that is main element of smart ventilation system was developed for removing indoor $CO_2$, and evaluate the adsorption performance. Specific surface area, pore characteristic and crystal structure of the modified sorbent was measured to analyze physical properties. From this analysis, it was found that the developed absorbent has a low specific surface area, due to mesopores of substrate was filled with metal contained raw material. Additionally, through analysis of the adsorption properties, the developed adsorbent was shown a adsorption form of mesopore (type IV), which means adsorption amount was rapidly increased at the part of high-pressure. Order to applying for the field, chamber test was performed. Continuous column tests (2,500 ppm) and batch chamber tests ($4m^3$, 5,000 ppm) showed $CO_2$ removal efficiency of 95% and 88% within 1 hour, respectively.
CO2 직접 제거를 통한 다중이용시설의 에너지 절감 및 경제적 효과에 대한 실험적 연구
김요섭(Yo Seop Kim),이주열(Ju-Yeol Lee),최진식(Jin Sik Choi),신재란(Jae Ran Shin),임윤희(Yun Hui Lim),박병현(Byung Hyun Park),김윤신(Yoon-Shin Kim) 한국유화학회 2014 한국응용과학기술학회지 Vol.31 No.3
It is important to develop the smart ventilation system in order to minimize a building energy consumption using ventilation. In this study, We evaluated the efficiency of the smart ventilation system being developed at the nursery. To evaluate the energy savings and carbon dioxide removal efficiency, two kinds of experimental conditions were compared. First, air conditioner and Smart HVAC system were operated. Second, air conditioner was operating and external air was put into the inside by rate of air circulation. It was more effective when working with air conditioning and ventilation system at the same time. If the Smart HVAC system is applied in a multi-use facility, indoor air quality will be comfortable and the social cost will be reduced.
박병현(Byung Hyun Park),홍승혁(Seung-Hyouk Hong),임동호(Dong Ho Lim),임윤희(Yun Hui Lim),김요섭(Yo Seop Kim),김병순(Byung-Soon Kim),이주열(Ju Yeol Lee) 한국산학기술학회 2014 한국산학기술학회 학술대회 Vol.- No.-
본 연구에서는 배가스가 각 단의 스크러버를 통과함에 따라 SOx/NOx 동시 제거효율이 높을 수 있 도록 각 요소기술을 개발하는 실험적 연구를 수행하였다. NOx의 주성분인 NO를 산화 및 흡수과정을 통해 제거하기 위하여 첨가제로 NaClO₂를 이용하였고, SO₂를 제거하기 위하여 NaOH를 사용하였다. 중소형 선박에서 배가스의 SO₂/NOx를 동시에 처리하기 위하여, 내부 설치공간을 최소화한 컴팩트 모 듈 방식의 고효율 습식 3단 세정장치 시스템을 고안하였고 이를 통한 다양한 실험적 결과를 도출하였 다.
암모니아 가스 제거를 위한 나노 복합 촉매 제조 및 기술 개발
홍승혁(Seung-Hyouk Hong),박병현(Byung Hyun Park),임동호(Dong Ho Lim),임윤희(Yun Hui Lim),김요섭(Yo Seop Kim),김병순(Byung-Soon Kim),이주열(Ju-Yeol Lee) 한국산학기술학회 2014 한국산학기술학회 학술대회 Vol.- No.-
본 논문에서는 암모니아를 저감 할 수 있는 촉매제를 제조 하였다. 촉매제 제조 방법은 다음과 같다. 지지체인 Activated alumina를 사용하여 AgNO₃ (99 %), Cu(NO₃)2 (99.8 %)를 과잉용액함침법으로 담 지하여 분산하였다. Ag-Cu의 혼합 조성비는 (10-x)Ag–xCu (4≤ x ≤7) 의 일정비율로 혼합한 후 교반하여 함침용액을 제조한 다음, 500 oC에서 3시간 동안 전처리한 지지체를 함침용액에 1:2 비율로 24 시간 동안 과잉용액 함침하였다. 상등액을 제거하기 위하여 여과법을 이용하여 고-액 분리를 하였 으며, 금속 담지 알루미나 촉매는 100 oC의 건조기에서 6시간 건조함으로써 남아있는 수분을 제거하였 다. 촉매제 특성에 대한 분석은 BET, XRD 그리고 XPS를 분석하였다. 촉매제 특성 평가는 챔버내에 촉매제를 장입후 암모니아 가스를 흘려 초기 농도와 촉매제를 통과한 농도를 분석하였다. 그 결과 Ag 와 Cu의 비율이 5:5 일 때 암모니아 제거효율이 높다는 것을 확인 하였다.
임윤희(Yun Hui Lim),이주열(Ju Yeol Lee),박병현(Byung Hyun Park),홍승혁(Seung-Hyouk Hong),임동호(Dong-Ho Im),김요섭(Yo Seop Kim),김병순(Byung-Soon Kim) 한국산학기술학회 2014 한국산학기술학회 학술대회 Vol.- No.-
본 연구는 건물의 에너지 효율 향상을 위한 다중이용시설 및 공동주택의 환기시스템 개선의 요소기 술 중 하나인 이산화탄소 제거용 흡착제 및 흡착모듈에 관한 것이다. 제올라이트를 기반으로 제조한 이산화탄소 흡착제의 기본 물성 평가 및 저농도 이산화탄소에 대한 선택도를 통해 최적의 흡착제를 개발하였으며, 이를 환기시스템에 적용하기 위하여 흡착필터를 장착할 수 있는 흡착모듈을 형상별로 설계, 제작하여 평가하였다. 최적화된 흡착제가 충진된 흡착필터는 덕트 내 유속을 고려한 유속별, 흡 착층 높이에 따른 차압을 측정하여 2 m/s에서 20 mmAq 이하의 압력손실을 유지하였으며, 챔버시험 결과 80 % 이상의 CO₂ 제거효율을 확인할 수 있었다.
전압비교기를 이용한 AB급 연산증폭기의 슬루율 개선에 관한 연구
김요섭,손상희 청주대학교 산업과학연구소 2016 産業科學硏究 Vol.33 No.2
In this paper, we introduce a circuit which has improved power consumption and slew rate by adding a voltage comparator on the structure of the class AB rail to rail folded cascode OP amplifier. Using a voltage comparator, bias voltage near to VDD is applied in charging and discharging time and so high voltage is transferred to the output load. Therefore, proposed class AB rail to rail folded cascode OP amplifier circuit has high slew rate and low power consumption. From the simulation results of slew rate, we know that slew rate of proposed circuit is improved from 2.5V/us to 12V/us comparing to the conventional circuit. That is the reason why voltage comparator transmits voltage near to the value of VDD to the load stage. From the simulation results of power consumption, we know that power consumption of proposed circuit is improved from 1.2mW to 0.5mW comparing to the conventional circuit. Proposed class AB rail to rail folded cascode OP amplifier is designed and simulated by using the TSMC 0.18um 1-Poly & 6-Metal CMOS process.
DDI에 사용가능한 높은 슬루율의 전류 부스팅 회로를 갖는 CMOS 증폭기 설계에 관한 연구
김성호,김요섭,손상희 청주대학교 산업과학연구소 2017 産業科學硏究 Vol.35 No.1
In this paper, we designed an AB-class rail-to-rail differential OP-AMP with the desired slew rate and low power consumption while maintaining minimum specifications of other parameters. To realize the above mentioned it, we propose a new concept that uses a current boosting circuit at the bias stage and a voltage comparator circuit at the output stage that can increase the gate voltage. The amplifier with high slew rate and fast driving speed without increasing the power consumption is designed and tried to demonstrate its performance through computer simulation. Simulation results show that the proposed circuit has a high slew rate of 18.3 V/us while the conventional circuit has a low slew rate of 2 V/us.