http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
회전체 진동 감소를 위한 마그네틱 댐퍼의 설계 및 응용
김영배,이형복,이봉기,Kim, Young-Bae,Yi, Hyeong-Bok,Lee, Bong-Ki 대한기계학회 2000 大韓機械學會論文集A Vol.24 No.2
In this study, active control magnetic actuator for reducing vibration of rotor system is performed. Identification, modeling, simulation, control system design, and evaluation of active magnetic damper system have been researched. Power amplifier modeling, connected magnetic actuator and augmented by system identification, is included to establish a magnetic damper simulation which provides close performance correspondence to the physical plant. A magnetic actuator, digital controller using DSP(Digital Signal Processor), and bipolar operational power supply/amplifiers are developed to show the effectiveness of reducing rotor vibration. Also the curve fitting procedure to obtain the transfer function of frequency dependent components is developed. Two kinds of test are executed as sliding and oil bearing. Results presented in this paper will provide a well-defined technical parameters in designing magnetic damper system for the proposed rotor.
김영배,한원남,유태종,Kim, Young-Bae,Han, Won-Nam,Yoo, Tai-Jong 한국식품과학회 1985 한국식품과학회지 Vol.17 No.5
$28^{\circ}{\pm}2^{\circ}C$에서 24주 동안 저장한 쌀은 대조구및 곰팡이를 접종한 경우에는 수분항량이 각각 13.7%$\sim$14.1%로서 곰팡이의 생장은 보이지 않았다. 바구미가 존재할 경우에는 , n-hexanal 함량도 대조구및 곰팡이구에 비하여 현격한 차이를 나타내며 변화하였다. Polished rice was stored for 24 weeks at $28^{\c수분함량이 16.0% after infestation with rice weevil (Sitophilus oryzae), inoculation with a storage mold, or both treatment. The moisture contents of stored rice with and without rice weevil were 16.6%-17.3% and 13.70%-14.1% respeotively. Fungal numbers were $4.3{\times}10^{6}$/g to $7.2{\times}10^{6}$/g with insects while no fungal growth occurred without them. There were considerable differences between rice weevil infested- and non-infested rice in rice kernel hardness, 1000 kernel weight, maximum viscosity on amylogram, reducing sugar content, fat acidity, and n-hexanal content in head space gas.
접지봉 매설을 위한 유도공 굴착장치 및 탄소접지동봉 활용 접지저항 경감 방법
김영배(Young-Bae Kim),이기종(Ki-Jong Lee),문현우(Hyun-Woo Moon),손준상(Jun-Sang Son) 대한전기학회 2021 전기학회논문지 Vol.70 No.1
In korea, the electric facilities and communication equipments have been built with a grounding construction in order to protect human life from electrical shock of lightning/ surge voltage and secure the performance of electric appliances and rapid emit an impulsive current into underground for safety. Also, the value of grounding resistance of the electric facilities was legislated to certain resistance value in korea and it should be perform the reinforcement construction for maintaining less than the specified value. But it’s very hard to carry out the grounding reinforcement construction without any damage on the seven underground utilities scattered around underground of downtown area. Futhermore, although it is inevitable to use additional resistance reducing materials for qualifying the value, but the porosity of ground and resultant loss of reducer make that uncontrollable. Therefore we had to seek the process of minimizing the economic loss and basically preventing the national property loss, negligent accident, futhermore, appling the method of cost reduction as well.
김영배(Young-Bae Kim),정순신(Sun-Shin Jung),이홍식(Hong-Sik Lee) 대한전기학회 2006 대한전기학회 학술대회 논문집 Vol.2006 No.7
오늘날 전자기파의 영향은, 제어장비의 내부에 있는 기판의 전자 부품에 전자기적인 충격을 주어 장비의 오동작이나 고장을 일으키는등 심각한 문제들이 제기 되고 있다. 이러한 엄펄스 전자기파는 제어 장치에 연결된 제어전선으로 타고 들어와서 전자장비 내부의 부품들과 반사, 공진등을 일으켜서 결국에는 PCB(printed circuit board)에 손상을 입혀서 그 장치들을 사용 못하게 할 수가 있다. 주파수가 광대역인 50㎒ 에서 800㎒ 까지의 EMI(electro magnetic interference)환경을 만들수 있는 장치를 제작 하였다. 이러한 UWB(ultra wide band)장치는 고전압펄스를 압축 성형하여, 동작시간이 아주 빠른 ultra fast 스위치를 통해서, 펄스의 기립 시간이 수백ps의 파형을 만들어, 안테나로 전송하여 공간으로 방사시키는 장치에 대해 설계 제작하여 실험한 결과에 대해 논하고자 한다.
대전류 펄스 성형을 위한 젤리롤형 인덕터의 제작과 특성분석
김영배(Young Bae Kim),김종수(Jong Soo Kim),진윤식(Yun Sik Jin),류홍제(Hong Je Ryu),김진성(Jin Sung Kim),이병하(Byung Ha Lee) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
펄스파워 전원장치에서 전류펄스 파형을 성형하기 위해 인덕터를 이용한다. 이 인덕터는 고주파용이므로 철심(core)이 없는 공심이어야 하며, 또한 표피효과(skin effect)로 인한 저항손실의 영향을 줄일 수 있는 구조로 제작되어야 한다. 표피효과를 줄이기 위해서, 인덕터는 권선의 동판을 3장 겹쳐서 나선형으로 감은 젤리롤(jelly roll)형으로 제작하였고, 실험을 통하여 인덕턴스값과 저항값을 측정한 결과를 소개 하고자 한다.