http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
SHS 화학로에 의한 (B.Si)C 복합체의 합성 및 기계적 특성에 관한 연구
이형복,조덕호,이재원 한국세라믹학회 1995 한국세라믹학회지 Vol.32 No.4
The (B.Si)C composite was prepared form the mixture of metal boron, silicon, and carbon powders in Ar atmosphere by Self-propagating High-temperature Synthesis Chemical Furnace. The characterization of synthesized power and sintered body were investigated. The microstructure of sintered body suggested that SiC boundary was made between B4C grains. The most excellent mechanical properties, the relative density of 95% oftheoretical value, 3 point flexural strength of 360MPa, and fracture toughness of 3.6MN/m3/2 could be obtained in 80wt% B4C-20 wt% SiC composite were obtained.
SHS 화학로에 의한 (Ti.W)C 복탄화물의 합성 및 기계적 특성에 관한 연구
이형복,오유근,이풍헌,장동환 한국세라믹학회 1996 한국세라믹학회지 Vol.33 No.4
(Ti.W)C complex carbide was synthesized by self-propagating high temperature synthesis (SHS) chemical furnace. Attempt to find the optimal condition for synthesis of (Ti.W)C the effects of molar ratio of Ti:W:C on the synthesized powders and mechanical properties were investigated, Optimum molar ratio of these synthe-sized powder was Ti:W:C=0.7:0.2:1.0 The bulk density M,O.R Hardness Fracture toughness of (Ti.W)C complex carbide sintered at 200$0^{\circ}C$ for 60 min by hot-pressing under the pressure of 20 MPa were 7.6g/cm3, 475 MPa, 17,.7 GPa respectively.
어린이보호구역 내 교통사고 다발지점의 교통안전시설에 관한 비교 연구
이형복 한국융합과학회 2018 한국융합과학회지 Vol.7 No.4
Pupose : This research aimed at investigating the difference in the degree of traffic safety facility installation according to 3 points by dividing the car accidents within school zone into crosswalk, crossroad, road and footpath along with the accident spot. Methods : The analysis used one-way ANOVA of 207 children car accident hazard cases between 2012 ~ 2014 utilizing traffic accident analysis system(TAAS). Conclusion : There are differences in the degree of installation of traffic safety facilities, low accident facilities, pedestrian safety facilities, and parking prohibited facilities at many traffic accidents in school zone. 연구목적 : 본 연구는 어린이 보행안전을 위하여 어린이 보호구역 안에서 발생한 교통사고를 사고지점에 따라 횡단보도, 교차로, 차도 및 보행로로 구분하여 3지점에 따른 교통안전시설의 비교를 통해설치효과를 알아보는데 목적이 있다. 연구방법 : 사고 지점에 따른 교통안전시설인 차량감속유도시설, 보행자안전시설, 주․정차 금지시설의 설치 정도 차이를 알아보기 위해 도로교통공단에서 제공하는교통사고분석시스템(TAAS)와 어린이보호구역 현황 및 도면을 자료를 활용하였다. 2012년~2014년3년 동안 발생한 어린이 보호구역 내 어린이 교통사고 다발지역 사고사례 207건을 빈도분석과 일원분산분석(ANOVA)을 실시하였다. 결론 : 첫째, 등교시간보다 교통안전 지도가 이루어지지 않고 있는하교시간 이후에 대부분의 사고가 발생하였으며, 사고지점에 대해서는 차도 및 보행로에서 가장 많은사고가 발생하였다. 둘째, 차량감속유도시설 중 교통사고 지점에 따라 유의미한 차이를 보인 시설은과속방지턱(가상과속방지턱), 교통안전표지, 교통노면표시, 유색 및 미끄럼방지포장이 있었으며, 4개시설 모두 횡단보도 및 교차로 보다는 차도 및 보행로의 설치 정도가 낮은 것으로 분석되었다. 셋째, 보행자안전시설 중 교통사고 지점에 따라 차이를 보인 시설은 보행자용 방호울타리, 무단횡단 방지용펜스, 횡단보도, 횡단보도 신호기, 조명시설이 있었으며, 5개 시설 모두 횡단보도 및 교차로 보다는차도 및 보행로의 설치 정도가 낮은 것으로 분석되었다. 넷째, 보행자안전시설 중 주․정차금지시설은차이를 보이지 않았지만, 두 시설은 횡단보도 및 교차로보다 차도 및 보행로의 설치 정도가 낮은 것으로 분석되었다.
가로수가 가로등 조도에 미치는 영향 - 대전시를 대상으로 -
이형복,김상범,이시영 (사)한국정원디자인학회 2015 한국정원디자인학회지 Vol.1 No.2
This study proposes lighting simulation approach to evaluate lighting quality on motor ways and sidewalks considering different forms and growth form of roadside trees. Simulation approach to evaluate quality of lighting is frequently used for lighting design to provide safety for drivers and pedestrians during night time. But, road side trees which have diverse benefits for citizens acts on obstacles during night time needs lighting. The results of this study show a possible way for achieve the aims of both lighting and road side tree. It will be possible to develop harmonic design standards for road way lighting if further study achieved based on the result of this study. 본 연구는 가로수의 생장과 유형에 따라 도로와 가로공간에서 조명 품질을 평가하는 조명 시뮬레이션 방법을 제안한다. 조명의 품질을 유지하기 위한 이러한 시뮬레이션 방법은 야간에 운전자와 보행자의 안전을 보장하기 위한 조명디자인에 빈번히 활용된다. 시민을 위해 다양한 혜택을 주는 이러한 가로수는 야간 조명이 필요로 하는 동안 한편으로장애물 역할을 합니다. 본 연구의 결과는 가로조명 및 가로수의 목적을 달성하기 위한 가능한 방법을 보여줍니다. 본연구 결과에 기초하여 앞으로의 연구들은 가로수에 대한 보다 조화로운 설계방법으로 발전될 것입니다.
SHS법에 의한 ZrC 합성 및 온도 Profile 분석
이형복,조건,이재원,Lee, Hyung-Bock,Cho, Kurn,Lee, Jea-Won 한국세라믹학회 1995 한국세라믹학회지 Vol.32 No.6
Zirconium carbide was prepared from the mixture of metal zirconium and carbon powders in argon atmosphere by Self-propagating High-temperature Synthesis (SHS) in order to obtain the best carbon source and dilution contents. The most exellent result was obtained in the case that active carbon was added as a starting material, 20~30 wt% dilution content. From thermal profile analysis an apparent activation energy of 118 KJ/mol was calculated. The maximum heating rate achieved during 15 wt% ZrC reaction by product dilution method was approximately 1.54$\times$105 K/s. Coupling this value with the measured wave velocity of 1.026cm/s yielded a maximum thermal gradient fo $1.5\times$105 K/cm. Using the definition of t* and the measured wave velocity, the effective thermal diffusivity, $\alpha$, was calculated to be 0.62$\times$102 $\textrm{cm}^2$/s.
SHS법에 의한 $TiB_2-TiC$ 복합체의 소결특성에 관한 연구
이형복,조덕호,장준원 한국세라믹학회 1992 한국세라믹학회지 Vol.29 No.7
TiB2 and TiC were prepared from the mixture of metal titanium, boron and graphite powders in Argon atmosphere by Self-propagating High-temperature Synthesis method. The sintered properties of TiB2-TiC composite as a function of TiC content and sintering temperature were investigated in TiB2 matrix. The sintered properties were the most excellent at 10 wt% TiC content in TiB2-TiC composite. The relative density, M.O.R strength, hardness and fracture toughness of TiB2-10 wt% TiC composite sintered at 190$0^{\circ}C$ for 90 min by hot-pressing under the pressure of 30 MPa were 98.6%, 634 MPa, 2128.1 kg/$\textrm{mm}^2$ and 4.09 MN/m3/2, respectively.
SHS 화학로에 의한 $B_4C$ 합성 및 기계적 특성에 관한 연구
이형복,조덕호,박성,이재원,Lee, Hyung-Bock,Cho, Duk-Ho,Park, Sung,Le, Jea-Won 한국세라믹학회 1993 한국세라믹학회지 Vol.30 No.8
Boron cabride was prepared from the mixture of metal boron and graphite powders in Argon atmosphere by Self-propagating High-temperature Synthesis Chemical furnace. The most excellent mechanical properties were in the case that Fe was added as a sintering agent before the synthesis of the B4C in the Chemical furnace. Sintered B4C-5wt% Fe specimen showed the relative density of 95%, of theoretical value, and 3-point-flexural strength of 380MPa.