http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전염병 확산 방지를 위한 딥러닝 기반 얼굴 만지기 행동 인식 연구
조성만(Sungman Cho),김민지(Minjee Kim),최준명(Joonmyeong Choi),김태형(Taehyung Kim),박주영(Juyoung Park),김남국(Namkug Kim) 한국방송·미디어공학회 2020 한국방송공학회 학술발표대회 논문집 Vol.2020 No.7
무의식적인 손-얼굴의 접촉으로 인한 감염의 문제점을 해결하기 위해, 얼굴 만지기 행동을 인식할 필요가 있다. 본 연구는 최근 각광을 받는 딥러닝 기술을 이용하여 비디오 영상에서 얼굴 만지기 행동 인식에 대한 연구이다. 우선, 비디오 영상에서 얼굴 만지기와 관련된 11가지 행동에 대한 시, 공간적 특징을 컨볼루션 신경망을 통해 추출한다. 추출된 정보는 각 행동 레이블로 인코딩되어 비디오 영상에서 얼굴 만지기 행동을 분류한다. 또한, 3D, 2D 컨볼루션 신경망의 대표 네트워크인 I3D, MobileNet v3에 대해 비교 실험을 진행한다. 제안하는 시스템을 적용하영 인간의 행동을 분류하는 실험을 진행했을 때, 얼굴을 만지는 행동을 99%의 확률로 구분했다. 이 시스템을 이용하여 일반인이 무의식적인 얼굴 만지기 행동에 대해서 정량적으로 또는 적시적으로 인식을 하여, 안전한 위생 습관을 확립하여 감염의 확산방지에 도움을 줄수 있기를 바란다.
천장관절 나사 고정술을 위한 컴퓨터 지원 수술 장치의 개발
염진섭,최원식,김하용,김환정,강종원,김영호,김형민,서동현,이석,이제범,김남국,김철영 대한골절학회 2003 대한골절학회지 Vol.16 No.1
목 적 : 천장관철의 경피적 나사 고정술을 위한 컴퓨터 지원 수술 장치를 개발하여, 그 정확도를 측정하여 보고자 하였다. 대상 및 방법 : 광학 추적 장치(Polaris, Northern Digital, Canada)와 개인용 컴퓨터를 이용한 항법 장치를 개발하였다. 정확도 측정용 팬텀을 제작하여 복합 정합시의 정합 오차와 표적 지시 오차를 각각 30회씩 측정하였으며, 4개의 플라스틱 골반골 모델(Sawbone, USA)에 16개의 6.5 ㎜유관 나사를 삽입하여 정확히 삽입되었는지 여부를 호가인하였다. 결 과 : 정합 오차는 0.76±0.33㎜, 표적 지시 오차는 1.43±0.42㎜였다. 골반골 모델에 삽입한 16개의 나사는 모두 천장관절내에 삽입되었고, 피질골을 뚫고 나오거나 인접한 두 개의 나사나 와셔가 서로 충돌한 경우는 없었다. 결 론 : 개발된 컴퓨터 지원 수술 장치는 해외에서 개발된 장치와 유사한 정확도를 가지고 있었고, 골반골 모델을 이용한 모의 수술에서도 만족할 만한 결과를 얻었다. Purpose : The purpose of this study were to develop a computer-assisted surgery system for percutaneous screw fixation of the sacro-iliac joint and to evaluate its accuracy. Materials and Methods : We have developed a navigation system composed of an optical tracking device(Polaris, Northern Digital, Canada) and a personal computer. The registration error and target localization error at hybrid registration were measured using a phantom. The errors were measured 30 times for each. Sixteen 6.5㎜ cannulated screws were inserted into four plastic bone models (Sawbones, USA), and the accuracy was evaluated. Results : The registration error was 0.76±0.33 ㎜, and the target localization error was 1.43±0.42 ㎜. All of the 16 screws were inserted well across the sacro-iliac joint, and there was neither penetration of the cortical bones nor collision between screws or washers. Conclusion : The accuracy of the developed system was similar to existing ones, and its usefulness and helpfulness was proven with screw insertion into plastic bone models.
Park, Jae-Woo,Kim, Namkug,Chang, Young-Il 대한치과교정학회 2008 대한치과교정학회지 Vol.38 No.6
Objective: The purpose of this study is to compare landmark position between cephalometric radiography and midsagittal plane projected images from 3 dimensional (3D) CT. Methods: Cephalometric radiographs and CT scans were taken from 20 patients for treatment of mandibular prognathism. After selection of landmarks, CT images were projected to the midsagittal plane and magnified to 110% according to the magnifying power of radiographs. These 2 images were superimposed with frontal and occipital bone. Common coordinate system was established on the base of FH plane. The coordinate value of each landmark was compared by paired t test and mean and standard deviation of difference was calculated. Results: The difference was from -0.14 ± 0.65 to -2.12 ± 2.89 mm in X axis, from 0.34 ± 0.78 to -2.36 ± 2.55 mm (6.79 ± 3.04 mm) in Y axis. There was no significant difference only 9 in X axis, and 7 in Y axis out of 20 landmarks. This might be caused by error from the difference of head positioning, by masking the subtle end structures, identification error from the superimposition and error from the different definition. Conclusions: This study revealed innate shortcomings of radiography. For the development of 3D cephalometry, more study was needed. 본 연구는 두부계측방사선사진에서 선정한 계측점과, 3차원 CT영상에서 계측점을 선정하고 이를 정중시상면으로 투영하였을때 두 계측점 사이의 위치적 연관성에 대해 알아보고자 시행하였다. III급 부정교합을 주소로 서울대학교 치과병원에 내원한 환자 20명을 대상으로 술 전에 CT와 두부방사선사진을 촬영하였다. CT자료에서 계측점을 선정하고, 정중시상면을 기준으로 투사영상을 얻은 후에 이것을 110%로 확대하였다. 전두면과 후두골의 외연을 기준으로 두부방사선사진 투사도와 CT자료의 정중시상면 투사영상을 중첩하고, FH평면을 기준으로 공통 좌표계를 설정하였다. 이 좌표계를 기준으로 얻은 계측점 좌표값 차이의 평균과 표준편차를 구하고 paired t test를 시행하였다. X축은 -0.14 ± 0.65 에서 -2.12 ± 2.89 mm, Y축은 0.34 ± 0.78에서 -2.36 ± 2.55 mm (6.79 ± 3.04 mm)의 범위를 보였으며, 20개의 계측점 중 X축은 9개에서, Y축은 7개에서 통계적으로 유의한 차이가 없는 것으로 나타났다. 이러한 오차는 촬영자세에 따라 악골의 위치가 변화한 경우, 골단부에 위치함으로써 주변 구조물에 가려진 경우, 해부학적 구조물의 중첩에 따른 식별오차, 계측점의 정의가 다른 경우 발생할 수 있다.