http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
3G 통신 시스템 응용을 위한 0.31pJ/conv-step의 13비트 100MS/s 0.13㎛ CMOS A/D 변환기
이동석(Dong-Suk Lee),이명환(Myung-Hwan Lee),권이기(Yi-Gi Kwon),이승훈(Seung-Hoon Lee) 대한전자공학회 2009 電子工學會論文誌-SD (Semiconductor and devices) Vol.46 No.3
본 논문에서는 two-carrier W-CDMA 응용과 같이 고해상도, 저전력 및 소면적을 동시에 요구하는 3G 통신 시스템 응용을 위한 13비트 100MS/s 0.13㎛ CMOS ADC를 제안한다. 제안하는 ADC는 4단 파이프라인 구조를 사용하여 고해상도와 높은 신호처리속도와 함께 전력 소모 및 면적을 최적화하였다. 입력 단 SHA 회로에는 면적 효율성을 가지면서 고속 고해상도로 동작하는 게이트-부트스트래핑 회로를 적용하여 1.0V의 낮은 전원 전압동작에서도 신호의 왜곡없이 Nyquist 대역 이상의 입력 신호를 샘플링할 수 있도록 하였다. 입력 단 SHA 및 MDAC에는 낮은 임피던스 기반의 캐스코드 주파수 보상 기법을 적용한 2단 증폭기 회로를 사용하여 Miller 주파수 보상 기법에 비해 더욱 적은 전력을 소모하면서도 요구되는 동작 속도 및 안정적인 출력 조건을 만족시키도록 하였으며, flash ADC에 사용된 래치의 경우 비교기의 입력 단으로 전달되는 킥-백 잡음을 줄이기 위해 입력 단과 출력 노드를 클록 버퍼로 분리한 래치 회로를 사용하였다. 한편, 제안하는 시제품 ADC에는 기존의 회로와는 달리 음의 온도 계수를 갖는 3개의 전류만을 사용하는 기준 전류 및 전압 발생기를 온-칩으로 집적하여 잡음을 최소화하면서 시스템 응용에 따라 선택적으로 다른 크기의 기준 전압 값을 외부에서 인가할 수 있도록 하였다. 제안하는 시제품 ADC는 0.13㎛ 1P8M CMOS 공정으로 제작되었으며, 측정된 DNL 및 INL은 13비트 해상도에서 각각 최대 0.70LSB, 1.79LSB의 수준을 보이며, 동적 성능으로는 100MS/s의 동작 속도에서 각각 최대 64.5dB의 SNDR과 78.0dB의 SFDR을 보여준다. 시제품 ADC의 칩 면적은 1.22㎟이며, 1.2V 전원 전압과 100MS/s의 동작 속도에서 42.0㎽의 전력을 소모하여 0.31pJ/conv-step의 FOM을 갖는다. This work proposes a 13b 100MS/s 0.13㎛ CMOS ADC for 3G communication systems such as two-carrier W-CDMA applications simultaneously requiring high resolution, low power, and small size at high speed. The proposed ADC employs a four-step pipeline architecture to optimize power consumption and chip area at the target resolution and sampling rate. Area-efficient high-speed high-resolution gate-bootstrapping circuits are implemented at the sampling switches of the input SHA to maintain signal linearity over the Nyquist rate even at a 1.0V supply operation. The cascode compensation technique on a low-impedance path implemented in the two-stage amplifiers of the SHA and MDAC simultaneously achieves the required operation speed and phase margin with more reduced power consumption than the Miller compensation technique. Low-glitch dynamic latches in sub-ranging flash ADCs reduce kickback-noise referred to the differential input stage of the comparator by isolating the input stage from output nodes to improve system accuracy. The proposed low-noise current and voltage references based on triple negative T.C. circuits are employed on chip with optional off-chip reference voltages. The prototype ADC in a 0.13㎛ 1P8M CMOS technology demonstrates the measured DNL and INL within 0.70LSB and 1.79LSB, respectively. The ADC shows a maximum SNDR of 64.5㏈ and a maximum SFDR of 78.0㏈ at 100MS/s, respectively. The ADC with an active die area of 1.22㎟ consumes 42.0㎽ at 100MS/s and a 1.2V supply, corresponding to a FOM of 0.31pJ/conv-step.
표면 탈아세틸화 키틴 나노섬유와 가교된 TEMPO산화 나노셀룰로오스 하이드로겔의 특성
조승우 ( Seung-woo Cho ),마서영 ( Seo-young Ma ),이다영 ( Da-young Lee ),김정기 ( Jeong-gi Kim ),한송이 ( Song-yi Han ),권구중 ( Gu-joong Kwon ),권재경 ( Jaegyoung Gwon ),반디라즈쿠마 ( Rajkumar Bandi ),다디갈라라마크리슈나 ( Ramakrishna 한국목재공학회 2022 한국목재공학회 학술발표논문집 Vol.2022 No.2
열유도 아미드화를 통해 표면 탈아세틸화 키틴 나노섬유(S-DeActyl-ChNF)와 가교된 TEMPO 산화 셀룰로오스 나노피브릴(TOCNF) 하이드로겔의 특성에 대해서 조사하였다. 두 섬유의 혼합으로 양전하를 띠는 S-DeActyl-ChNF는 정전기 상호작용을 통해 음전하를 띠는 TOCNF에 결합되며, 가열을 통하여 TOCNF의 카르복실기와 ChNF의 아민기가 아미드 결합을 형성할 수 있다. FT-IR 스펙트럼에서 아미드 결합의 생성을 확인하였고, 하이드로겔 형성에 대한 온도 및 농도의 영향을 검토하였다. 순수한 TOCNF 하이드로겔과 비교하여 S-DeActyl-ChNF와 가교된 하이드로겔은 우수한 형태 안정성을 나타냈다.
Membrane System을 적용한 GTL-FPSO Sloshing 공정 최적화
남지태(Ji Tae Nam),성태제(Tae Jea Sung),임주영(Ju Young Lim),이종열(Jong Yeol Yi),모용기(Yong Gi Mo),권옥배(Ok Bae Kwon),이영철(Yeong Cheol Lee) 대한설비공학회 2016 대한설비공학회 학술발표대회논문집 Vol.2016 No.11
GTL(Gas to Liquid) is technology of manufacturing liquid fuels that have high cetane number, low PAH(Poly Aromatic Hydrocarbon), and low sulfur through the processes of gasification, Fischer-Tropsch synthesis(F-T synthesis), hydro cracking, etc. It is also alternative diesel fuel got attention to reduce NOx and PM fundamentally. Existing GTL is utilized for onshore stranded gas and associated gas of small and medium gas fields, but Korea Gas Corporation (KOGAS) applied it to Floating Production Storage and Off loading(FPSO) and built sloshing pilot plant producing offshore clean fuel to use offshore stranded gas through many processes on topside of FPSO. KOGAS tried to optimize operation conditions through operating GTL-FPSO sloshing pilot plant and have technological advances for applicability in this research. Especially, we focused on maintaining optimized synthesis gas H2/CO ratio that is applicable to use as feed gas of Fischer-Tropsch reactor for process optimization of CO2 separation process as using simulation program for achieving laboratory goals.