http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
권상근,서성훈,Kwon, Sang-Keun,Seo, Seong-Hoon 한국약제학회 1995 Journal of Pharmaceutical Investigation Vol.25 No.2
Alginic acid is a hydrophilic , colloidal polysaccharide obtained from cell wall of seaweed or brown algae and has a broad range of applications. Alginlc acid becomes alginate gel bead due to its cation-induced gelation. Dried alginate beads can be reswollen according to environmental pH. The purpose of this paper is to explore the possible applicability of alginate beads as an oral controlled release system of ibuprofen. In this experiment ibuprofen was incorporated in alginate beads and alginate beads were treated with various methods. Ibuprofen release from alginate beads in phosphate buffer (pH 7.4) was laster than in distilled water and dilute HCl. The release of ibuprofen was more sustained in bead than simple mixture and coprecipitate of ibuprofen and sodium alginate. The dissolution rate of ibuprofen was decreased in using of bead that hardened with formaldehyde. The dissolution rate of the drug from the bead was the fastest in 12 hour dried beads, 1.5%-sodium alginate concentration and 1%-calcium chloride concentration. Sodium alginate bead can be used as a sustaind release drug delivery system of water-insoluble drugs.
기반 기술 : CPW와 개방 스터브가 병렬 연결된 전송선로를 이용한 비대칭 이중대역 Wilkinson 분배기
권상근 ( Sang Keun Kwon ),김영 ( Young Kim ),윤영철 ( Young Chul Yoon ) 한국항행학회 2016 韓國航行學會論文誌 Vol.20 No.1
본 논문은 CPW와 개방 스터브가 병렬 연결된 전송선로를 사용하여 높은 분배 비율의 비대칭 이중대역 분배기를 나타내었다. 이중대역 설계 방정식에 의하여 계산된 전송선로의 구현은 낮은 임피던스의 전송선로는 짧은 선로와 병렬로 개방 스터브가 주기적으로 연결된 형태로 그리고, 높은 임피던스 전송선로는 CPW 선로 형태로 구현하였다. 이러한 두 종류 전송선로를 이용한 이중대역 분배기의 설계방법의 타당성을 확인하기 위해서 중심 주파수가 1 GHz와 2 GHz인 10:1 비대칭 이중대역 전력분배기를 제작하였고, 이것의 측정 결과 특성이 시뮬레이션과 동일함을 확인하였다. This paper presents a high dividing ratio unequal dualband divider using coplanar waveguide (CPW) and shunt connected open stub transmission lines. In order to implement transmission lines for a dualband divider using design equations, the low impedance lines of divider can be realized a shunt connected open stub transmission line. Also, the high impedance lines are realized by CPW transmission lines. To certify the validity of an unequal dualband divider using CPW and shunt connected open stub transmission lines, the 10:1 unequal dualband divider is implemented at operating frequency of 1 and 2 GHz. Good experimental performance at each frequency are obtained, which are in good agreement with the simulated results.
권상근 ( Sang Keun Kwon ),김영 ( Young Kim ),윤영철 ( Young Chul Yoon ) 한국항행학회 2013 韓國航行學會論文誌 Vol.17 No.2
본 논문에서는 병렬 연결된 전송선로를 이용하여 고 비율 비대칭 전력 분배기를 설계하였다. 병렬 연결된 전송선로는 마이크로스트립 기술로 구현하기 어려운 낮은 임피던스의 전송선로를 높은 임피던스 전송선로로 구현하는 방법이다. 비율 비대칭 분배기 구현 시 사용되는 낮은 임피던스를 구현하기 위하여 병렬 연결된 전송선로를 이용함으로서 구현을 쉽게 할 수 있었다. 이러한 설계방법의 타당성을 보이기 위해서 중심 주파수 1 GHz에서 10:1 비율의 비대칭 전력 분배기를 제작하였고, 이것의 특성은 시뮬레이션과 거의 동일함을 확인하였다. In this paper, a high dividing ratio unequal power divider using parallel connection transmission line is presented. Because a very low impedance transmission line can`t implement a microstrip technology, this can fabricate a parallel connection transmission line with high impedance. When we design a high dividing ratio divider, we need the very low impedance line. The parallel connection transmission line could be implemented to obtain a low impedance line characteristic. To validity this approach, we are implemented a 10:1 unequal divider at center frequency 1 GHz. The performances of power divider agree with simulation results.
2차 고조파 신호를 이용한 극 함수 발생기를 갖는 셀룰라 밴드용 전치 왜곡 선형화기 설계
김일규,전기경,김영,권상근,윤영철,Kim, Ell-Kou,Jeon, Ki-Kyoung,Kim, Young,Kwon, Sang-Keun,Yoon, Young-Chul 한국전자파학회 2006 한국전자파학회논문지 Vol.17 No.11
본 논문은 주 신호에서 추출한 2차 고조파 신호를 극 함수 형태로 만들어 주 신호와 진폭 변조를 시키는 새로운 방식의 전치 왜곡 선형화기를 제안하였다. 이 선형화기는 2차 고조파 신호의 동 위상과 직각 위상 신호 결합으로 만들어진 극 함수 발생기와 주 경로의 진폭 변조기로 구성되어 있다. 극 함수 발생기 신호와 주 신호가 진폭 변조되어 .만들어진 전치 왜곡 3차 혼변조 신호는 전력 증폭기의 비선형 특성을 개선시킬 수 있으며, 셀룰라 기지국 송신 대역$(869{\sim}894MHz)$의 증폭기를 제작하여 증폭기 비선형 특성을 확인하였다. 반송파 2톤 신호를 인가하였을 때, 주파수 간격이 1 MHz에서 전력 증폭기의 3차 혼변조는 22.5 dB 이상 개선되었고, CDMA-IS95 1FA의 경우에는 이격 지점 885 kHz에서의 인접 채널 전력비(ACPR)는 8.4 dB 이상 개선됨을 확인하였다. This paper proposes a new predistortion linearizer with amplitude modulator and PFG(Polar Function Generator) using second order harmonic signals. This linearizer consists of PFG that combine with in-phase and quadrature-phase of second harmonic signals and amplitude modulator in main path. The predistorted third order intermodulation distortion(IMD3) signals that are generated by amplitude modulator with fundamental and PFG signals, improve a amplifier nonlinear characteristics. The proposed linearizer and amplifier have been manufactured and tested to operate in cellular base-station transmitting band$(869\sim894MHz)$. The test results show that IMD3 can be removed by more than 22.5 dB in case of CW 2-tone signals ${\Delta}f=1$ MHz, and the adjacent channel power ratio(ACPR) also can be improved by more than 8.4 dB for CDMA IS-95 1FA signals.
CRLH 전송 선로를 이용한 공진 기법의 전력 결합 기술
김일규(Ell-Kou Kim),김영(Young Kim),권상근(Sang-Keun Kwon),윤영철(Young-Chul Yoon) 한국전자파학회 2009 한국전자파학회논문지 Vol.20 No.8
본 논문에서는 CRLH 전송 선로를 이용한 공진 기법의 전력 결합 기술을 제안하였다. 사용된 공진 기법의 회로는 증폭기의 정합과 전력 결합 역할을 하는 병렬 캐패시턴스 그리고 증폭기들의 전력 결합을 위한 전송선로로 구성되어 있고, 여기에 사용된 전송 선로는 CRLH(Composite Right/Left-Handed) 전송 선로로 구현함으로써 회로의 크기를 감소시켰다. 이 기술의 유용성을 확인하기 위해서 제안한 전력 결합 기술을 이용한 2단 증폭기를 구현 및 측정한 결과, 단일 증폭기와 이득은 동일하고, 출력 전력은 2.2 ㏈ 증가하였으며, 기존의 RH 전송선로를 이용한 전력 결합 증폭기보다 면적이 78.3 % 감소하였다. This paper proposes a resonance power-combining technique using CRLH-transmission line. The circuits using proposed technique consist of the parallel capacitances and transmission lines to satisfy matching conditions and to combine power of amplifiers. The CRLH(Composite Right/Left-Handed) transmission lines are used to reduce the circuit size. As a result, the power combining amplifier using proposed techniques is measured that a gain is equal and the output power is increased about 2.2 ㏈ higher than the single amplifier. Also, a size of amplifier is 78.3 % smaller than the conventional amplifier using RH transmission line.