http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
다이아몬드 터닝 단속 절삭 시 알루미늄 합금과 공구 경사각에 따른 가공 표면 특성 연구
박성현(S. H. Park),김영재(Y. J. Kim),강종균(J. G. Kang),함중규(J. K. Ham),곽영태(Y. T. Kwak),김건희(G. H. Kim) Korean Society for Precision Engineering 2021 한국정밀공학회 학술발표대회 논문집 Vol.2021 No.11월
소형, 경량화된 우수한 성능의 광학부품수요가 증가함에 따라 비철금속기반의 제품을 초정밀 가공할 수 있는 Diamond Turning (DT) 공정이 산업에서 널리 활용되고 있다. 특히 광학 부품의 형상이 다양화 됨에 따라 DT 가공 중 불연속한 형상을 가공하는 방법인 단속 절삭에 대한 수요가 증가하고 있다. 그러나 알루미늄 합금 재료 표면을 단속 절삭 가공할 시, 절삭경계에서 공구 또는 피삭재에 충격이 발생하여 표면 스크래치와 거칠기가 증가하고 광학적 기능이 저하되는 문제점이 있다. 이 문제를 해결하기 위해 본 논문에서는 광학 부품의 재료로 활용되는 알루미늄 합금의 종류와 DT 가공 공구의 경사각을 가공 변수로 두어 DT 단속 절삭 시 나타나는 가공 표면의 특성을 실험, 관찰하였다. 시편은 총 4 종(Al6061-T6, T651, Al7075-T6, RSA6061-T6)의 알루미늄 합금 재료를 사용하였으며, 각 재료는 20 x 8 x 10 mm 크기의 직사각형 모양 시편으로 제작하였다. 공구경사각을 제외한 DT 가공 조건은 동일하게 하였으며, 공구경사각은 총 4 가지 각도(0, -5, -10, -15°)를 변수로 선정하여 실험하였다. 실험 후 가공된 표면을 평가하기 위해 백색광 간섭계를 이용하여 표면 거칠기를 측정하였고, 광학 및 전자현미경을 사용하여 표면 형상을 관찰하였다. 그 결과 모든 알루미늄 합금 소재는 공구경사각이 -5°일 때 공통적으로 가장 좋은 표면 거칠기를 얻었으며, 그 중에서도 알루미늄 외 기타 합금물 입자(Si, Fe 등)의 영향이 가장 적은 RSA6061-T6 소재의 표면 거칠기가 Ra 0.9 nm로 가장 우수한 값을 얻을 수 있었다.
선경,곽영태,김형묵,Sun, K.,Kwak, Y.T.,Kim, H.M. 대한흉부심장혈관외과학회 1992 Journal of Chest Surgery (J Chest Surg) Vol.25 No.12
This is the result of the annual statistic analysis of thoracic and cardiovascular surgical cases in 1991, Korea. 14,715 cases of surgery[thoracic 8,995/cardiovascular 5,720] were done by 53 institutes replied. The order of frequency of cell type in primary lung cancer was squamous [62.3%] / adeno [23.9%] / small [6.4%] / adenosquamous [3.0%], and in mediastinal tumor, neurogenic[27.l%] / thymoma [27.1%] / teratoma[26.4%] / congenital cystic[12.0%]. Surgery for tuberculosis was decreased to 15.8% of overall infectious disease from the recent 6 year`s average 35.7%. In general thoracic surgery, the single most frequent operation was closed thoracostomy[4,047 cases] for pleural pathology. The ratio of congenital to acquired heart disease was 2:1, and acyanotic to cyanotic was 3:1. The order of frequency of congenital acyanotic heart disease was VSD [45.6%] / ASD [25.6%] / PDA [20.4%] / PS [2.9%], and that of cyanotic heart disease was TOF [42.6%] / PA [12.9%] / TGA [9.9%] / DORV [8.8%]. In 1,364 cases of valvular surgery, single mitral pathology was the most frequent candidate[729 cases, 53.4%]. In 243 cases of coronary surgery, bypassing graft materials were great saphenous vein[41.6%], internal mammary [39.5%], and artificial vessel[18.9%]. There were no specific differences in aortic surgery, assisted device implantation, and antiarrhythmic surgery as compared to previous study. This nation-wide inquiry will be continued and reported annually by KTCS Society.
국군 수도병원의 심혈관계 수술 304예에 대한 임상적 고찰
선경,박영환,김범식,이건우,이영욱,백광제,정원상,곽영태,김형묵,Sun, K.,Park, Y.H.,Kim, B.S.,Lee, K.W.,Lee, Y.W.,Baek, K.J.,Jung, W.S.,Kwak, Y.T.,Kim, H.M. 대한흉부심장혈관외과학회 1988 Journal of Chest Surgery (J Chest Surg) Vol.21 No.6
From 1959 through Jun. 1988, 2094 cases of various Cardiovascular diseases were operated, which were consisted of 1215 open heart surgery under extra-corporeal circulation or hypothermia and 879 conventional Cardiovascular Surgery at Department of Thoracic & Cardiovascular Surgery in National Medical Center. There were 1111 congenital heart anomalies and 983 acquired cardiovascular diseases. Among 1111 congenital cases, acyanotic cases were 748 and cyanotic cases were 363. In acquired heart cases, valvular heart diseases [702 cases] were the most frequent and a small No. of cardiac tumor and coronary artery diseases were included. Overall operative mortality was 9.3%, consisting of 4.6% for acyanotic anomaly, 20.6% for cyanotic anomaly and 8.7% for acquired heart diseases. In open heart surgery, overall mortality was 11.6% and 6% in conventional cardiovascular surgery.