http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
소프트웨어 명세에서의 상속을 위한 테스트 케이스 선택방법
임흥식(Hyeung Sik Im),강연우(Younwoo Kang),조창현(Chang-Hyun Jo) 한국정보과학회 1998 한국정보과학회 학술발표논문집 Vol.25 No.1A
객체지향 소프트웨어 시험에 관한 연구가 다양하게 진행되어 왔다. 그러나 이전의 연구들은 대부분 객체지향성으로 인해 발생하는 오류가 무엇인지를 논하거나, 시험을 개발방법론과 통합하는 것이 바람직함에 대해 논하고 있을 뿐, 구체적으로 그 문제점들이 무엇으로 인해 발생하고, 시험과 개발방법을 어떻게 통합해야 하는지는 논하고 있지 못하고 있다. 이러한 이유는 아직까지도 소프트웨어 시험에서, 객체지향과 관련된 내용들이 정립되어 있지 못할 뿐 아니라, 객체지향의 특징 중의 하나인 재사용성의 문제와 직결된 상속성을 시험할 수 있는 유용한 방법이 제시되지 않았기 때문이다. 본 논문은 상속을 시험하기위해, 명세를 이용하여 적절한 테스트 케이스의 선택방법을 제시한다. 본 논문에서 제시한 방법은 객체지향 소프트웨어의 품질을 향상시킬 뿐만 아니라, 개발 비용을 절감할 수 있도록 도울 것이다. 또한 객체지향 소프트웨어 개발의 자동화에 기반이 될 것이다.
조기강도 콘크리트의 압축강도 추정을 위한 비파괴검사 실험식의 제안
이태규 ( Tae-gyu Lee ),강연우 ( Yeon-woo Kang ),최형길 ( Hyeong-gil Choi ),최경철 ( Gyeong-choel Choe ),김규용 ( Gyu-yong Kim ) 한국건축시공학회 2016 한국건축시공학회지 Vol.16 No.3
현장에서는 콘크리트 공사시 거푸집 탈형작업을 위한 다양한 기술들이 활용되고 있다. 그중에서 콘크리트의 압축강도추정을 위한 비파괴 시험방법에는 다양한 방법들이 제시되고 있지만, 일반적으로 타격법(반발경도법이라 칭함)과 비타격법(초음파법이라 칭함)을 활용한 시험방법이 주로 활용된다. 비파괴시험에 의한 압축강도의 추정은 경험 값에 의한 방정식에 의하여 계산할 수 있으며 다양한 식들이 제시되고 있으나, 초기재령에서 조기강도가 발현되는 콘크리트에 대한 데이터는 적은 편으로 기존의 강도추정식에 의한 압축강도의 계산에는 한계점이 있을 수 있다. 본 연구에서는 현장에서 주로 활용되는 조기탈형용 콘크리트의 배합을 활용하여 소형 공시체 및 Mock-up 시험체의 파괴 및 비파괴검사를 수행하였으며, 기존 비파괴검사 추정식을 통한 강도결과 값을 분석하였다. 실험결과, 기존 연구의 비파괴시험에 의한 제안식을 활용한 압축강도 추정값은 파괴시험방법에 비하여 하회하는 경향으로 70% 이하의 값을 나타냈으며, 초음파속도에 의한 신뢰성은 강도가 높아질수록 낮아지는것으로 확인되었다. 본 연구의 범위에서 조기강도 발현 콘크리트의 강도추정에 있어 기존식의 활용의 한계점이 있을것으로 분석되어, 24~60MPa의 콘크리트를 대상으로 반발경도법 및 초음파속도법에 의한 추정식을 제안하였다. In construction field, it used various technique for concrete formwork. Part of them, non-destructive test has been conducted to estimate a compressive strength of concrete easily such as rebound method and ultrasonic pulse velocity method etc. Former research has recommend proposed equation based on experimental data to investigate strength of concrete but it was sometimes deferent actual value of that from in field because of the few of data in case of early strength concrete. In this study, an experiment was conducted to analyze strength properties for early strength concrete using cylinder mold and 1,000mm×1,000mm×200mm rectangular specimen. And compressive strength of concrete was tested by non-destructive test, and calculated by the equation proposed former research. As a result, the non-destructive test results showed approximately 70 percent of the failure test value for all conditions, and worse reliability was obtained for high strength concrete samples when the ultrasonic pulse velocity method was used. Based on the scope of this study, the experimental equation for estimating compressive strength of early strength concrete from 24MPa to 60MPa was proposed.
고강도 매스콘크리트의 수화지연효과에 따른 수화발열상승속도 및 자기수축의 저감 특성 평가
김규용,구경모,신경수,이의배,강연우,타케우치 토루,Kim, Gyu-Yong,Koo, Kyung-Mo,Shin, Kyoung-Su,Lee, Eui-Bae,Kang, Yeon-Woo,Takeuchi, Tohru 대한건축학회 2011 대한건축학회논문집 Vol.27 No.1
In this study, to reduce the hydration heat velocity of the high-strength mass concrete at early ages, micro encapsuled retarder that could retard cement reaction was applied, and the changes of autogenous shrinkage and the relationship between the hydration temperature and autogenous shrinkage were investigated. In the result of research, the retardation of the cement hydration process by the micro encapsuled retarder leads to an late setting, with no effect on the development of the compressive strength of concrete. The hydration temperature and hydration heat velocity of high-strength mass concrete can be decreased with the use of the micro encapsuled retarder. A close relationship could be found between the hydration temperature and autogenous shrinkage; the higher the hydration heat velocity, the higher the autogenous shrinkage velocity and the greater the ultimate autogenous shrinkage.