http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
레이저와 2차원 배열의 광전검출기를 이용한 구조물의 변위측정 시스템의 개발에 관한 연구
강문필,이진이,김민수,김대정,최원하,강기훈,김종수,김훈 한국비파괴검사학회 2002 한국비파괴검사학회지 Vol.22 No.1
일반적으로 구조물은 외부의 정적 및 동적 하중과 외부환경으로 인하여 피로균열과 부식이 발생하며, 이것은 구조물의 변형을 유발하여 결국 파단으로 이어지기 때문에 균열과 부식의 검출 및 평가와 함께 구조물의 변형에 의한 진동, 변위 기울기와 같은 거동을 감시하는 것도 매우 중요하다. 이에 레이저 센서 시스템을 이용하여 이러한 거동을 측정하여 이상 유무를 모니터링할 수 있는 구조물 안전감시 시스템을 개발하였다. 본 시스템은 2차원으로 배열한 광전센서를 이용하여 구조물의 변형에 의해 유발된 광궤적의 변화를 감시하며 또한 데이터를 취득하고 신호처리 할 수 있는 운용 프로그램도 갖추고 있다. 본 연구에서는 개발한 안전 진단 시스템의 필드 적용에 앞서 실험실에서의 몇 가지 실험을 통하여 그 효용성을 검증하였다. A Safety Monitoring System using a laser and 2-D arrayed photo sensors is developed. To monitor of the deformation and small rotation of structure the developed optical system using 2-D photo sensor array was used to detect the variation of optical orbit of laser which was induced by deformation of the structure. Also, an operating program to manage the system and an algorithm for the data acquisition and the database are introduced. In this study, we demonstrated the capabilities of this system by laboratory experiments before applying the system to the field.
음향방출과 SFC 시험법에 의한 금속복합재료의 기지재 열처리 효과에 따른 미시적 변형기구 특성 평가
강문필,이준현 한국비파괴검사학회 2000 한국비파괴검사학회지 Vol.20 No.5
금속기지 복합재료의 미시적 파손기구는 작용하중의 방향, 재료의 열처리 상태, 기지재 및 강화재의 특성, 섬유체적률 등 여러 인자의 영향을 받는다. 이중 특히 재료의 열처리는 금속기지 복합재료의 기계적 특성을 지배하는 주요한 인자인 강화섬유와 기지재 사이의 계면특성에 큰 영향을 준다. 강화섬유와 기지재는 매우 큰 열팽창계수 차이를 가지기 때문에 금속기지 복합재료의 제조과정에 있어서 급격한 온도강하가 있을 경우에는 강화섬유와 기지재 사이의 계면에서는 잔류응력이 형성되며 이 때 발생한 잔류응력은 금속복합재료의 파손기구는 물론 기지재와 강화섬유 사이의 계면전단강도에도 중대한 영향을 미칠 수도 있다. 따라서 금속복합재료에 있어서 기지재와 강화재 사이의 계면전단강도에 대한 잔류응력의 영향을 평가하는 것은 금속복합재료의 실질적인 응용측면에서는 매우 중요한 과제라 할 수 있다. 복합재료에 있어서의 음향방출 기법과 SFC시험법을 동시에 이용하면 기지재와 강화재의 균열 및 기지재와 강화재 사이의 계면분리현상에 의한 미시적 파손기구를 명확하게 분리, 관찰할 수 있는 크나큰 이점이 있다. 따라서 본 연구에서는 음향방출기법과 SFC시험법을 이용하 여 금속복합재료의 열처리 효과에 따른 미시적 파손기구 및 계면전단강도 변화특성을 체계적으로 연구, 고찰하였다. Metal matrix composites(MMCs) have been rapidly becoming one of the strongest candidates for structural materials for high temperature application. It is well recognized that MMCs always experience at least one large cool-down from processing temperature before any significant applied service loading. Due to the large difference in thermal expansion coefficient between the fiber and matrix, large thermal residual stresses generally develop in composites. It was reported from many previous studies that the effects of thermal residual stress on mechanical properties and fracture behavior were much more complex and dramatic than conventional engineering materials. Therefore it is crucial to evaluate the effect of heat treatment which changes the characteristic of distribution of thermal residual stress in MMCs. Single fiber composite(SFC) test based on the balance in a micromechanical model is a quite convenient method to evaluate interfacial interfacial shear strength(IFSS) and the failure mode of composite. In this study the effect of heat treatment on IFSS and the microscopic failure mechanism of MMC is investigated by combining acoustic emission(AE) technique with SFC test. The characteristic of AE signal. IFSS and microscopic failure mechanism due to heat treatment condition discussed. Keywords : metal matrix composite, heat treatment, coefficient of thermal expansion, residual stress, interfacial shear strength, SFC test, acoustic emission
전기분해 처리에 의한 양식장 배출수의 수질특성에 관한 연구
이용두(Yong Doo Lee),김창영(Chang Young Kim),강문필(Moon Pil Kang) 한국수처리학회 2002 한국수처리학회지 Vol.10 No.1
N/A This study was carried out to test the feasibility of electrochemical method in the treatment of aquacultural effluent and to determine the optimal conditions of operating parameters including applied voltage and reaction time. In electrolysis, dioxide iridium coated titanium (Ir0_2/Ti) and stainless steel plate were used for anode and cathode respectively. Possible optimum range for these operating variables are experimentally determined. In experiment of batch system, COD_Mn removal rates were 32.8%, 44.6% and 57.0%. And removal rate of ammonia were 62.0%, 70.4% and 79.1% when electrical density were 35,71A/㎡, 71.42A/㎡ and 107.14A/㎡. It was observed that the removal rate of organic matters and ammonia is proportional to the current density and the retention time. In experiment of continuous system, variation of COD_Mn, SS and ammonia were respectively 25.8∼10.2, 29.3∼15 ㎎/l and 3.57∼0.73 ㎎/l when the removal of organic matters and ammonia is conducted at the same time. Because oxides, such as hyperchloric ions, interfere the process of oxidation of ammonia, the removal rate get reduced. After ammonia is removed, organic matters are oxidized. Therefore it is estimated that the ammonia should get removed first.