http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이민래,이준현,Lee, Min-Rae,Lee, Jun-Hyeon 대한기계학회 2002 大韓機械學會論文集A Vol.26 No.5
Acoustic emission(AE) technique has been applied to not only mechanical property testing but also on-line monitoring of the entire structure or a limit zone only. Although several AE devices have already been developed for on-line monitoring, the price of these systems is very high and it is difficult for the field to apply yet. In this study, we developed a specially designed PC-based leak detection system using A/D board. In this paper, AE technique has been applied to detect leak for heat exchanger by analyzing the characteristics of signal obtained from leak. It was confirmed that the characteristics of the signal generated by the turbulence of gas in the heat exchanger is narrow band signal having between 130-250kHz. Generally, the amplitude of leak signal is increased as the leak size increasing, but showed no significant change at frequency characteristic. Leak source location can be found by determining for the paint of highest signal amplitude by comparing with several fixed sensors. In this paper, AE results are compared with the PC-based leak detection system using A/D board.
음향방출기법을 이용한 극저온 환경하에서 초전도 계자코일의 퀀칭탐지 적용에 관한 연구
이민래,권영길,이준현,손명환,Lee, Min-Rae,Gwon, Yeong-Gil,Lee, Jun-Hyeon,Son, Myeong-Hwan 대한기계학회 2000 大韓機械學會論文集A Vol.24 No.4
It is well recently recognized that quench is one of the serious problems for the integrity of superconducting magnets, which is mainly attribute to the rapid temperature rising in the magnet due to some extrinsic factors such as conductor motion, crack initiation etc. In order to apply acoustic emission(AE)echnique effectively to monitor and diagnose superconducting magnets, it is essential to identify the sources of acoustic emission. In this paper, an acoustic emission technique has been used to monitor and diagnose quenching phenomenon in racetrack shaped superconducting magnets at cryogenic environment of 4.2K. For these purposes special attention was paid to detect AE signals associated with the quench of superconducting magnets. The characteristics of AE parameters have been analyzed by correlating with quench number, winding tension of superconducting coil and charge rate by transport current. In addition, the source location of quench in superconducting magnet was also discussed on the basis of correlation between magnet voltage and AE energy.
레이저 초음파와 Wavelet변환을 이용한 재료표면균열 평가
이민래,최상우,이준현 한국비파괴검사학회 2001 한국비파괴검사학회지 Vol.21 No.2
비파괴 평가 기술들 중의 하나인 레이저 초음파 응용 기술은 각종 구조물에 존재하는 표면결함에 의한 신호를 통해 건전성을 평가하는 기법이다. 따라서 결함의 신뢰성 높은 정량적 평가를 위해서는 결함으로부터의 레이저 초음파 신호특성에 대한 기본적 이해가 필수적이며 따라서 이를 위한 신호해석 연구가 요구된다. 본 연구에서는 레이저 유도 초음파에 의한 one-sided 기법을 이용하여 표면균열을 평가하고자 하였다. 하지만 레이저를 이용한 평가방법들은 수신된 신호의 해석이 까다로우며 또한 상당한 전문적인 지식이 요구된다. 웨이블렛 변환(wavelet transform, WT) 기법은 신호처리 분야에서 하나의 새로운 방법으로서 다양한 분야에 적용되고 있으며 특히 한 시점에 대한 주파수 분해가 가능한 신호처리 방법으로서 시간-주파수 분석에 아주 유용하게 이용되고 있다. 본 연구에서는 이러한 레이저 유도 초음파를 이용하여 재료의 표면 결함신호들에 대한 웨이블렛 변환기법을 적용하여 보다 정량적인 결함 크기를 예측하고 그 타당성을 평가하고자 하였다. Laser-generated ultrasonic technique which is one of the reliable nondestructive evaluation techniques has been applied to evaluate the integrity of structures by analyzing the characteristics of signal obtained from surface crack. Therefore, the signal analysis of the laser-generated ultrasonics is absolutely necessary for the accurate and quantitative estimation of the surface defects. In this study, one-sided measurement by laser-generated ultrasonic has been applied to evaluate the depth of the surface-breaking crack in the materials. However, since the ultrasonic waveform excited by pulse laser is very difficult to distinguish the defect signals, it is necessary to consider the signal analyses of the transient waveform. Wavelet Transform(WT) is a powerful tool for processing transient signals with temporally varying spectra that helps to resolve high and low frequency transient components effectively. In this paper, the analyses of the surface-breaking crack of the ultrasonic signal excited by pulse laser are presented by employing the WT analyses.
음향방출기법을 이용한 PC기반 위치표정시스템 개발에 관한 연구
이민래,이준현 한국비파괴검사학회 2003 한국비파괴검사학회지 Vol.23 No.3
구조물의 안전성 평가와 관련하여 비파괴평가 방법 중에서 음향방출(acoustic emission, AE)기법에 의한 비파괴적 결함 발생 검출 기법은 다른 기법에 비해 비교적 새로운 평가기술로서 구조물의 이상 유무를 조기에 진단하고 주기적으로 감시할 수 있는 온-라인 모니터링에 적합하다. 그러나 한편, 국내에서는 아직까지 이에 대한 체계적인 연구가 미비한 실정이며, 대부분 값비싼 외국 시스템을 도입하여 사용하고 있는 실정이다. 뿐 만 아니라 기존의 음향방출 시스템은 장치의 특성상 시스템이 매우 복잡하고 가격이 고가인 관계로 다양한 산업분야에서 실제 현장에 적용하기가 쉽지 않다. 따라서 본 연구에서는 기존의 음향방출 시스템이 가지고 있던 불필요한 낭비적인 요소들을 제거하고 실제 산업현장에 부합하는 위치표정 시스템을 개발하고자 하였다. 한편, 기존의 AE 시스템들은 위치표정을 위한 신호분석이 난해할 뿐만 아니라 박판 구조물의 경우는 위치표정이 매우 어렵다. 본 연구에서는 시간-주파수 해석에 널리 사용되고 있는 웨이블릿 기법을 이용하여 보다 정확한 위치표정을 진단하는 기법을 수행하였다. Acoustic emission (AE) technique has been applied to not only mechanical property testing but also on-line monitoring of the entire structure or a limit zone only. Although several AE devices have already been developed for the on-line monitoring, the price of these systems is very high and it is difficult for the field to apply yet. In this study, we developed a specially designed PC-based source location system using the A/D board. The source location technique is very important to identify the source, such as crack, leak detection. However, since the AE waveforms obtained from transducers are very difficult to distinguish the defect signals, therefore, it is necessary to consider the signal analyses of the transient waveform. Wavelet Transform (WT) is a powerful tool for processing transient signals with temporally varying spectra that helps to resolve high and low frequency transient components effectively. In this study, the analyses of the AE signals are presented by employing the WT analyses. AE results are compared the PC-based source location system using A/D board with the commercial AE system.