http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
$(Bi_{1-x}Pb_x)_2Sr_2Ca_2Cu_{3.6}O_y$ 소결체의 초전도 현상
박용필,황교영,이준웅 한국전기전자재료학회 1991 電氣電子材料學會誌 Vol.4 No.3
본 논문에서는 (B $i_{1-x}$ P $b_{x}$)$_{2}$S $r_{2}$C $a_{2}$C $u_{3.6}$ $O_{y}$ (x=0~0.5)로 조성된 분말의 최적 하소온도를 결정하고 시편의 최적 소결온도를 규명하기 위하여 열분석을 하였다. 또 단일상의 고온 초전도체를 제작하기 위하여 열처리 온도, 시간 및 Pb 함량 변화에 따라 제작된 시편의 미세구조, 조성, 전기저항 및 전류밀도를 측정하여 상호 연관성을 종합적으로 분석, 검토하여 상변이에 관한 원인을 규명하고자 하였다. 또한 실용화 전 단계로서 임계특성 해석을 위하여 성형조건을 변화시켜 시편을 제작, 전류밀도값을 측정하였다.였다.다.
金旺坤,黃敎榮,崔相俊 서울産業大學校 1990 논문집 Vol.31 No.1
본 연구는 電力系統의 力率을 직독형으로 測定하기 위한 Transduser의 회로를 開發하기 위하여 株式會社 千一電機와 Maching Fund로 이루어진 硏究이다. 赤外線 Optocoupler의 電氣的 絶緣特性과 信號傳達 特性을 이용하여 전력선의 電壓과 電流의 位相差를 電氣的으로 絶緣하면서 位相信號를 檢出하여 puls를 변조한 다음 cosθ값으로 變換하여 pulse counter를 사용하여 Digital 신호를 4Bit 7 sigment의 표시기에 力率값을 나타내주며 또한 이 力率값을 A/D 變換器회로를 사용하여 Anlog 신호를 出力하므로 力率개선용 機器의 制御나 力率記錄計등을 접속할 수 있도록 연구되었다. 또한 본 연구를 하는 과정에서 相差計(θ) 및 無效力率(sinθ)計도 같은 原理로 동작될 수 있기 때문에 이 회로에 약간의 變形을 가하면 3가지를 選擇測定이 가능한 計測器가 開發이 가능하다. This study on the development of transducer circuit which measures powerfactor of a power system in direct reading mode is accomplished by the matching funds system performed by Chunil Electric Enterprise and this study group. This algorithm of the technic of a power factor measurement is as follows. First, pulse modulation of the current phase signal detect with the difference of the phase angle to voltage and current in use of the characteristics which are electrical insulation and signal transmission of a infrared optocoupler. Second, this signals are converted into Cosineθand then this values are converted into digital signal by the pulse counter. Third, the signals are flowed into digitizer with 4 digits 7 segments. Last, the analog signals of the power factor are used to run electrical machinery, instrument and recorder. This study enables us to develop other two measurement factors-reactive power factor and angle meter. Namely, we are able to develop new digital meter that can display the power angle, power factor and reactive power factor.