http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
그루핑 및 페어링 알고리즘을 이용한 FMCW 차량용 레이더의 타겟 거리 및 속도 검출 방법
현유진(Eugin Hyun),이종훈(Jong-Hun Lee) 한국자동차공학회 2009 한국자동차공학회 학술대회 및 전시회 Vol.2009 No.11
The most important requirement for automotive FMCW(Frequency Modulation Continuous wave) radars system is the target range and velocity estimation. In the real field, since the beat-signal received from a target has multi-scattering center on the frequency domain, the exact up-beat and down-beat frequencies should be grouped using multi-scattering centers received from the same target. In this paper, we propose the grouping and pairing algorithm to detect exact target range and velocity.
현유진(Eugin Hyun) 대한전자공학회 2018 대한전자공학회 학술대회 Vol.2018 No.6
In this paper, we presents automotive radar intelligence technologies for highly automated and autonomous driving based on the reference technical report. For omni-directional monitoring using radar imaging, the radar networks are required. Moreover, each radar sensor provides the higher spatial (range and angle) and Doppler resolution for radar imaging performance. Finally, the rest is the area of signal processing. Among these new technologies, in this paper, we have researched the camera-radar fusion and object classification scheme. Thus, we introduced our research state.
현유진,성광수,Hyun Eugin,Seong Kwang-Su 대한전자공학회 2005 電子工學會論文誌-CI (Computer and Information) Vol.42 No.4
In this paper, we design a PCI Express controller for future communication system The controller supports the full functionality of Transaction Layer and Data Link Layer of PCI Express. The designed controller has the proposed transmitter buffer architecture to obey Replay mechanism. This scheme merges the transmitting buffer and the replay buffer. The proposed buffer has the higher data transfer efficiency than the conventional buffer architecture because it can dynamically adjust size of a replay buffer space. We also design transmitter of Transmitter Transaction Layer to effectively support the proposed buffer, The receiver device of PCI Express must possess the buffer for three types of transaction to support Flow Control. And it must report the amount of the buffer space regularly to the Port at the opposite end of the link. We propose the simple receiver buffer scheme using only one buffer to easily support Flow Control. And the designed controller is verified under proposed test bench 본 논문에서는 차세대 통신 플랫폼을 위한 PCI 익스프레스의 전송계층과 데이터 연결계층의 모든 기능을 지원하는 PCI 익스프레스 컨트롤러를 설계하였다. 설계된 컨트롤러는 재전송 메커니즘을 효과적으로 지원하기 위해 제안된 송신버퍼 구조를 가지고 있다. 이 버퍼 구조는 전송 버퍼와 재전송 버퍼를 한 개의 버퍼로 통합하여 재전송 버퍼의 공간을 유동적으로 할당할 수 있는 방법이다. 또한 설계된 컨트롤러의 송신단 전송계층은 제안된 버퍼 구조를 효과적으로 지원하도록 설계되어 졌다. 흐름제어를 지원하기 위해 PCI 익스프레스의 모든 수신 디바이스는 각 명령어를 위한 3개의 수신 버퍼를 가지고 있어야 하며, 각 수신 버퍼의 빈 공간을 주기적으로 상대 디바이스에 알려주어야 한다. 설계된 컨트롤러에서는 단지 하나의 수신 버퍼를 이용하여 흐름제어를 보다 쉽게 지원하기 위한 방법을 제안하였다. 또한 설계된 컨트롤러는 제안된 테스트 벤치를 통해 검증되었고 동작함을 확인할 수 있었다.
현유진(Eugin Hyun),오우진(Woojin Oh),이종훈(Jong-Hun Lee) 大韓電子工學會 2010 電子工學會論文誌-SC (System and control) Vol.47 No.6
오늘날 FMCW 레이더 시스템은 차량의 능동 안전 시스템에 널리 활용되어지고 있다. 레이더 시스템에서 탐지확률을 높이고 오경보율을 줄이기 위해서는 정지타겟을 포함한 클러터 성분을 제거하고 관심 있는 이동타겟을 효과적으로 탐지하기 위한 알고리즘이 필요하다. 본 논문에서는 이동타겟 탐지 및 클러터 제거 알고리즘을 제안한다. 먼저 제안된 이동타겟 비트주파수 검출 필터를 이용하여 클러터를 제거한다. 검출된 이동타겟 비트주파수들을 이용하여 데이터-결합 한 후, 제로-도플러 제거 알고리즘을 이용하여 남아있는 클러터를 제거한다. 이 알고리즘을 검증하기 위해 실제 FMCW 레이더를 이용하여 도로 상에서 실험하였다. 77㎓ FMCW(Frequency Modulation Continuous Wave) radar system has been used for automotive active safety systems. In typical automotive radar, the moving target detection and clutter cancellation including stationary targets are very important signal processing algorithms. This paper proposed the moving target detection algorithm which improve the detection probability and reduce the false alarm rate. First, the proposed moving target beat-frequency extraction filter is used in order to suppress clutter, and then the data association is applied by using the extracted moving target beat-frequency. Then, the zero-Doppler target is eliminated to remove the rest of clutter.
멀티레인을 지원하는 모바일 카메라용 직렬 인터페이스 프로세서 설계
현유진,권순,이종훈,정우영 대한전자공학회 2007 電子工學會論文誌-SD (Semiconductor and devices) Vol.44 No.7
In this paper, we design a mobile camera processor to support the MIPI CSI-2 and DPHY specification. The lane management sub-layer of CIS2 handles multi-lane configuration. Thus conceptually, the transmitter and receiver have each independent buffer on multi lanes. In the proposed architecture, the independent buffers are merged into a single common buffer. The single buffer architecture can flexibly manage data on multi lanes though the number of supported lanes are mismatched in a camera processor transmitter and a host processor. For a key issue for the data synchronization problem, the synchronization start codes are added as the starting for image data. We design synchronization logic to synchronize the received clock and to generate the byte clock. We present the verification results under proposed test bench. And we show the waves of simulation and logic synthesis results of the designed processor. 본 논문에서는 차세대 모바일 단말기의 카메라를 위한 MIPI CSI-2 / D-PHY 프로세서를 설계하였다. 설계된 프로세서는 멀티레인을 효과적으로 지원하기 위해 제안된 레인관리계층을 가지고 있다. 이 레인관리계층의 구조는 레인별로 존재하는 메모리를 하나로 통합하여, 송수신단이 지원하는 레인의 개수가 다른 경우에도 유연하게 관리되는 구조이다. 또한 패킷의 보전성을 확보하기 위해 CRC 코드를 사용하는데, 이를 실시간 생성을 위해 바이트 단위로 병렬 처리하는 CRC 생성기를 사용하였다. 마지막으로 데이터 레인으로부터 수신된 패킷들의 동기화 처리를 위한 동기 코드 검출기와 바이트 클럭 생성기도 설계였다. 또한 설계된 프로세서는 테스트 벤치를 통해 RTL 검증되었고 동작함을 확인 할 수 있었다.
차세대 입출력 인터페이스 컨트롤러를 위한 효율적인 기능 검증 환경 구현
현유진,성광수 대한전자공학회 2006 電子工學會論文誌-CI (Computer and Information) Vol.43 No.4
This paper proposes an efficient verification environment of PCI Express controller that is the future I/O interface. This verification environment consists of a test vector generator, a test bench, and two abstract memories. We also define the assembler set to generate the verification scenarios. In this paper, we propose the random test environment which consists of a random vector generator, a simulator part, and a compare engine. This verification methodology is useful to find the special errors which are not detected by the basic-behavioral test and hardware-design test. 본 논문에서는 차세대 입출력 인터페이스인, PCI 익스프레스 컨트롤러의 기능 검증을 위해 효율적인 검증 환경을 제안하였다. 검증 환경은 벡터 생성 부분, 테스트 벤치, 그리고 두개의 메모리로 구성된다. 이러한 효율적인 검증 환경을 제대로 동작시키기 위한 명령어 세트를 정의하였다 이 명령어는 어셈블리 구조를 가지며, PCI 익스프레스의 모든 프로토콜을 지원하며, 설계된 PCI 익스프레스 컨트롤러를 검증하기 위한 모든 시나리오를 제공하도록 정의되었다. 또한 본 논문에서는 랜덤 벡터 생성 부분, 시뮬레이션 부분, 그리고 비교 엔진으로 구성된 랜덤 검증 환경을 제안하였다. 본 랜덤 테스트 검증 환경에서 수행된 결과는 일반적인 기본 동작 검증과 설계 기반 검증에서 찾지 못한 특수 경우의 에러도 발견 할 수 있다.