http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Strength and Deformation Characteristics of Hamaoka sand by Torsional Shear Test
황성춘,박춘식 國立 昌原大學校 産業技術硏究所 1999 産技硏論文集 Vol.13 No.-
미소변형률(10??이하)에서 전단파괴 이후까지 Hamaoka 모래 공시체의 단조 및 반복 비틀림 단순전단시험을 실시하여 강도.변형특성을 조사하였다. 그 결과 다음과 같은 결론을 얻었다. 단조비틀림전단시험에서 얻어진 최대전단계수(Gmax)와 반복비틀림전단시험에서 얻어진 Gmax는 거의 같았다. 또, 단조비틀림전단시험에서 얻어진 할선전단계수(Geq)의 변형률의존성은 반복비틀림전단시험에서 얻어진 할선전단계수(Gsec)의 변형률의존성에 비해 컸다. 한편, 단조비틀림전단시험의 정규화한 최대내부마찰각은 평면변형률시험의 그것과 매우 유사하였다.
박춘식,장정욱,장일석 국립7개대학공동논문집간행위원회 2005 공업기술연구 Vol.5 No.-
This study suggests the most reasonable analytical and reinforcement methods for possible collapse of underground caused by levee construction on the soft ground. We inspected stability of levee in the field where heaving caused by sliding had occurred. We applied three reinforcement methods: Surcharge method, Sand Compaction Pile method, and Deep mixing method, all of which met the allowable safe factor. However, Surcharge method requires great amount of costs for land compensation and Sand Compaction Pile method had disadvantages of higher construction cost and instability of levee caused by vibration. Therefore, Deep mixing method is considered the most proper method.
평면변형률압축시험에 의한 각종 모래의 전단강성계수의 이방성
박춘식 창원대학교 산업기술연구소 2001 産技硏論文集 Vol.15 No.-
공중낙하법에 의해 만든 등방압밀 모래 공시체를 미소변형률 측정장치를 사용한 평면변형률압축시험을 실시하여 미소변형률에서 파괴 후까지의 전단강서계수에 대한 이방성을 연구하였다. 세계 각국의 주요 연구기관에서 사용되고 있는 7종류의 연구용 표준사 공시체를 멤브레인의 관입에 의한 오차와 변위를 외부에서 측정함으로 하여 생기는 오차(bedding error) 등의 영향을 제거하여 측정한 최대주응력방향의 변형률과 최소주응력방향의 변형률을 각각 0.0001%에서 10%까지 넓은 범위에 걸친 응력-변형률 관계를 얻었다. 그 결과 최대전단강성계수 Gmax는 모래의 종류에 따라 달랐다. 또, 전단강성계수의 변형률 수준과 응력 수준에 대한 의존성은 δ가 감소함에 따라 증가하였다. Anisotropy of stiffness, from extremely small strains to post-failure strains, of isotropically consolidated air-pluviated sands in plane strain compression was studied by using the newly developed instrumentation for small strain measurements. Seven types of sand of the world-wide origins were tested, which have been extensively used for research purposes. Stress-strain relationships for a wide range of strain from about 0.0001% to 10% were obtained with measuring axial and lateral strains locally free from the effects of bedding and membrane penetration errors at the specimen boundaries. It was found that the maximum shear modulus Gmax was irrespective of the angle δ of the б1 direction relative to the bedding plane. However, the normalized Gmax was varied with the types of sand. Furthermore, the dependency of the strain and stress level on the stiffness was increased as δ decreased.