http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : 朴商洽 (검색결과 41 건)
- 무료
- 기관 내 무료
- 유료
-
-
-
LNG 저장 탱크 운반선 9% Ni Steel의 용접성에 대한 실험분석과 메타분석 연구
박상흡(Sang Heup Park),안덕현(Duck Hyun Ahn) 한국산학기술학회 2016 한국산학기술학회논문지 Vol.17 No.12
본 연구는 LNG 저장 탱크 운반선 9% NI Steel에 대한 실험분석과 메타분석 연구이다. 본 연구는 LNG 저장 탱크운반선 9% NI Steel에 대한 선행연구에 기초해서 메타분석을 수행한 후에, 9% Ni Steel의 패스(pass)와 다층용접(multi pass)이 인장강도(tensile strength)에 미치는 영향을 분석하기 위하여 충격반응검정(impulse-response test)을 통한 실험분석을 수행하였다. 본 연구의 실험분석 결과 다음과 같은 연구결과를 얻었다, 첫째, 9% Ni Steel의 다층용접(multi pass welding)에 대한 인장강도(tensile strength)를 시험한 결과 패스 1부터 패스 3까지 인장강도가 증가하였으나, 패스 3 이후부터 다층용접의 인장강도는 감소하는 것으로 보인다. 둘째, 다층용접(Multi pass welding)이 인장강도(tensile strength)에 미치는 영향을 분석한 결과, 패스(pass), 다층용접(multi pass)이 인장강도(tensile strength) 에 유의한 정(+)의 영향을 미치는 것으로 보인다. 용접시간(welding time)이 인장강도(tensile strength)에 미치는 영향을 분석한 결과, 용접시간(welding time), 인장강도시간(tensile time)이 인장강도(tensile strength) 에 유의한 정(+)의 영향을 미치는 것으로 보인다. Laboratory and meta-analyses were done for 9% NI Steel for use in a liquefied natural gas carrier. The meta-analysis is based on a previous study. The laboratory analysis examines the effects of a single pass and multiple passes on the tensile strength through an impulse-response test. The tensile strength increased from pass one to pass three and decreased from pass four to pass ten. The pass and multi-pass welding had a positive effect on the tensile strength. Lastly, the welding and tensile time had a positive effect on the tensile strength.
-
朴商洽,朴仁圭,李龍福,南炳燦 弘益大學校 科學技術硏究所 1999 科學技術硏究論文集 Vol.10 No.1
Fabrication by welding may result in stress concentration regions in the joints and it may be caused by weld imperfections on geometrical discontinuities. Thus, fatigue strength of welded details was essential for fatigue design of welding structures. In this study, constant amplitude fatigue tests on load-carrying fillet welded specimen carried out, and fatigue strength were evaluated. Also, in this investigation an attempt is made to develop a new analytical model to predict the fatigue crack propagation life of fillet welded cruciform joints of SWS 490B steels containing lack of penetration defects with more accuracy. From the result of this study, fatigue crack growth characteristics of load-carrying fillet welded cruciform joints, containing lack of penetration defects are found to be influenced by the weld size and geometry.
-
마을 공동 우물용 지하수 정수 장치의 원격 모니터링 시스템 개발
김동진,박상흡,이홍섭 한국산학기술학회 2019 한국산학기술학회논문지 Vol.20 No.11
Recently, the pollution of groundwater has become serious. In particular, the contamination of groundwater near livestock farms is becoming increasingly severe and it is difficult to drink with drinking water. In this paper, a groundwater purifier apparatus that can be installed in a community well was designed. The designed groundwater purifier apparatus enables a RO membrane filter and UV sterilization to remove pollutants, such as heavy metals, bacteria, and organic compounds. In addition, electrical conductivity, pressure, and flow sensors were added for remote monitoring. Remote monitoring of the system can determine the level of fouling and contamination of RO membrane filters through pressure and flow sensor data, and can record changes in the contamination and condition of groundwater through the electrical conductivity of the feed water. The designed groundwater purifier apparatus was installed at a farmhouse and remote monitoring. The result after 15 days of operating a groundwater purifier apparatus and analyzing the monitoring data revealed an average permeate water flow rate of 2.67L/min and an average water pressure of 7.09kgf/cm2, indicating that the RO Membrane filtered without fouling and clogging. The average electrical conductivity was 796.6 S/cm2 of the feed water and 55.6 S/cm2 of permeate water, which is similar to that of general tap water. Through this, it was confirmed that no pollutant occurred in the surroundings. Therefore, the designed groundwater purifier apparatus can confirm the replacement time of the RO membrane filter in advance through remote monitoring, and check the pollution state of the groundwater. 최근 지하수의 오염이 심각해지고 있다. 특히 축산농가 근처의 지하수 오염은 더욱 심해지고 있으며, 음용수로 마시기 어렵다. 그러나 일부 지역에서는 오염된 것을 알면서도 마시고 있다. 본 논문에서는 마을 공동우물에 설치할 수 있는 지하수 정수 장치를 설계 하였다. 설계된 지하수 정수 장치는 RO 멤브레인 필터를 사용하고, UV 살균을 통해 중금속, 박테리아, 유기화합물 등의 오염물질을 제거할 수 있게 하였다. 또한 원격 모니터링을 위해 전기 전도도, 압력, 유량 등의 센서를 부가하였다. 원격으로 모니터링하는 압력 및 유량 데이터로 RO 멤브레인 필터의 파울링 및 오염의 여부를 판단할 수 있으며, 급수의 전기전도도를 통해 유입되는 지하수의 오염 및 상태의 변동을 파악할 수 있다. 본 논문에서 설계된 지하수 정수 장치를 시골 농가에 설치하여 원격 모니터링 하였다. 15일간 지하수 정수 장치를 운영하고 모니터링 데이터를 분석한 결과, 생산수 유량은 평균 2.67L/min이고 급수의 압력 평균 7.09kgf/cm2로 RO 멤브레인 필터가 파울링 및 막힘없이 필터링되고 있음을 파악할 수 있었다. 또한 평균 전기전도도는 급수 796.6 uS/cm2이고 생산수 55.6 uS/cm2로 일반적인 수돗물과 유사한 값을 나타내고 있어 주변에 오염원이 발생하지 않았음을 확인 할 수 있었다. 따라서 설계된 지하수 정수 장치는 원격 모니터링을 통해 필터의 교체 시점을 미리 확인할 수 있고, 지하수의 오염 여부에 대한 상태 확인이 가능하다.
-
레이저 섬광법을 이용한 열확산계수 측정시 오차요인별 분석연구
이원식,박상흡 대한용접접합학회 2002 대한용접·접합학회지 Vol.20 No.6
Laser flash method have been widely used for practical measuring method of thermal diffusivity. And it can be used for measurement of non-conductive materials as well as conductive materials and also for measuring thermal multi-properties. We have analyzed effects of error occurring during measurement of thermal properties in order to enhance measuring accuracy. Also we have studied delay time between measurement starting time with synchronizing signal and laser oscillating time, because it is important that measuring a time to rise temperature of specimen from room temperature to a half of measuring temperature at measuring a thermal diffusivity by laser flash method. We could reduce non-uniform heating error from non-uniform energy distribution by developing 3D uniformizer to eliminate non-uniform heating error. We have measured thermal diffusivities of POCO AXM-5Q1 and Glassy-Carbon which are standard specimen of NIST(USA) and candidate standard specimen of NRLM(japan) respectively for laser flash method. Maximum error fell within 2% for POCO AXM-5Ql gaphite and 2% for Glassy-Carbon. Those results showed error decreasing methods were effective.
-
이용복,정준기,박상흡,Lee, Yong-Bok,Chung, Joon-Ki,Park, Sang-Heup 대한용접접합학회 2011 대한용접·접합학회지 Vol.29 No.4
The proportion of the welding in the production process of machinery, buildings and marine structures is increasing and the joining are mainly conducted by butt and fillet weld. In the case of fillet weld, the shape of structures is complicated depending on the constraint on the geometry of the structures, therefore, the full penetration is mostly difficult. Accordingly, it is necessary to establish safe and economical criteria of design of the structures through the strength based on the penetration state of the fillet weld. Patterns of fatigue failure in cruciform fillet weld jont appear in the form of the root, toe and mixed failure. In the case of toe and mixed failure, the fatigue strength is higher than root failure. Therefore, we have to make the enough depth of penetration or perform the welding work through improving the fatigue strength of cruciform joints in welded structures. So it is necessary to optimize the penetrated depth in the range of the possible mixed failure and find the way in the cost-effective design to lessen the amount of the welding work.
-
-
AZ60 마그네슘합금을 이용한 용접 공정별 접합부 특성 평가
김부민,김인규,이한섭,박상흡 한국기계기술학회 2017 한국기계기술학회지 Vol.19 No.2
In this study, the mechanical characteristics with micro structure were analyzed on the butt joint of AZ60 magnesium material extruded by GMAW and GTAW processes. As the result of tensile test, the fracture in the welding joint area happened at both processes and seemed to be brittle fracture. The yield strength of GMAW was 84.29% and GTAW was 60.43% as compared with base metal. The yield strength of GMAW was higher 23.86% than that of GTAW. The result of decreased micro hardness was indicated at both processes. The value of minimum micro hardness in FZ at GMAW was Hv 46.7 and GTAW was Hv 43.6 as compared with base metal. The value of minimum micro hardness at GMAW process was higher 5.64 % than that at GTAW process. The size of grain boundary at GMAW process in HAZ is smaller than that at GTAW process. GMAW process is more superior than GTAW process from the productivity and quality in case of automatic welding for magnesium alloy such as the automobile seat frame.
-
연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
