http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
횡리브로 보강된 복합적층 원통형 쉘의 좌굴거동에 관한 연구
장석윤,Chang, Suk Yoon 한국강구조학회 2004 韓國鋼構造學會 論文集 Vol.16 No.4
본 논문에서는 복합재료로 이루어진 원통형 쉘 구조물을 해석모델로 설정하였으며, 좌굴의 링 보강재 보강효과에 대해서 연구하였다. 유한요소법으로 해석을 수행하였으며, 보강재의 요소는 3차원 보요소를 사용하였고, 쉘 요소는 적용성이 뛰어난 평면쉘요소를 사용하였으며, 대체 전단 변형률장을 도입하여 잠김현상을 극복하였다. 본 연구에서 링 보강재는 횡리브(Rib)의 형태이다. 이러한 보강재가 원통형 쉘의 좌굴에 미치는 영향을 고찰하였다. 즉, 보강재의 위치 변화, 보강재의 크기 변화, 쉘의 변장비 변화, 쉘의 지점조건의 변화, 복합재료의 화이버 보강각도 변화 등 다양한 파라미터 연구를 통해서 쉘의 좌굴거동을 분석하였다. 여러가지 설계변수에 대한 보강된 쉘의 거동에 대한 정확한 이해로부터 효율적인 보강설계를 제시하고자 하였으며, 원통형 쉘의 좌굴해석시 좋은 참고자료로 활용할 수 있으리라 기대된다. In this study, the effects of ring stiffeners for buckling of cylindrical shells with composite materials were analyzed. The finite element method was used: 3-D beam elements were used for stiffeners and flat shell elements were used for cylindrical shells and were improved by introducing a substitute shear strain. The ring stiffeners were of the transverse rib type. The buckling behaviors of the cylindrical shells were analyzed based on various parameters, such as locations and sizes of stiffeners, diameter/length ratios and boundary conditions of shells, and fiber-reinforced angles. Effective reinforcement was examined by understanding the exact behaviors for buckling. The results of the analysis may serve as references for designs and future investigations.
합성섬유와 국산면의 혼방에서 균제도 및 생산능률 향상문제
장석윤 한국섬유공학회 1969 한국섬유공학회지 Vol.6 No.1
In order to investigate the methods for improving the evenness of yarn, the amount of lubricants were used as a variant in the blending and spinning of short and long fibres The result swere as follows, (1) If the amount of lubricants remain constant, the finer yarn has the worse evennes. (2) If the finness of yarn remain constant, the more lubricants bring the better evenness. But it has limit on improvment, the limit of amount of lubricant was 0.45%. (3) In the spinning of finer yarn over 14's, there were less effect of lubricants on evenness than coarser yarn.
Draft Zone에서 혼방섬유의 운동상태와 불균제에 대한 연구
장석윤 한국섬유공학회 1967 한국섬유공학회지 Vol.4 No.1
纖維長이 틀리는 2種의 纖維를 混紡하되 長纖維는 等長纖維를 擇하고 짧은 纖維는 不等長纖維를 擇하여 混紡할 때 Draft Zone의 ratch를 長纖維便에 맞추어 놓고 不等長纖維만 浮遊纖維가 되게하여 이들이 Draft Zone 內에서의 纖維先端密度를 나타내고 Forster의 Sub-roving의 槪念에 立脚해서 Draft Zone 內에서의 Sub-roving의 平均速度를 計算했고 Draft Zone 內에서 纖維가 이러한 값에 따르지 않을 때 Irregularity가 커지는 것으로 究明했다. 또 Draft Zone 內에서의 纖維相互間의 接觸狀態를 推論하고 이들의 接觸狀態는 餘他條件이 變化하지 않는 限纖維相互間의 摩擦에 依해서만 決定지워 진다고 推論하고 Draft Zone에서 纖維相互間의 接觸狀態는 의 關係가 파괴 될 때 Irregularity는 增加하며 이 關係는 纖維相互間의 마찰에 依해서 變化한다는 것을 推論하고 이것들을 實驗的으로 確認했다.
고속원자충격질량분석법을 이용한 Thromboxane $B_2$ 분석
장석윤,김정훈,이용문,장성기,문동철,Jang, Suk-Yoon,Kim, Jung-Hoon,Lee, Yong-Moon,Jang, Seung-Ki,Moon, Dong-Cheul 한국분석과학회 1993 분석과학 Vol.6 No.4
고속원소충격질량분석법을 이용하여 thromboxane $B_2$의 극미량분석법을 개발하였다. static FAB mode에서 decosanoic acid를 내부표준물로 이용하여 검출한계 5ng의 분석법을 확립하였고, CF-FAB mode에서 고안한 시료도입장치를 사용하여 thromboxane $B_2$의 측정감도, 재현성 등 정량분석에 미치는 용매조성, 용매의 유속 등 분석파라미터들을 조사하였다. CF-FAB mode에서 0.75% glycerol(in EtOH, v/v)을 eluent 용매로, 유속을 $3.7{\mu}l/min.$로 하여 분석조건을 최적화하고 TIC법과 SIM 검출법을 이용하여 정량한계 각각 500pg 및 10pg인 극미량분석법을 확립하였다. Analytical methods of thromboxane $B_2(TXB_2)$ using various techniques of Fast Atom Bombardment mass spectrometry (FAB MS) were studied, static FAB condition was investigated to obtain linear response curve using docosanoic acid as a internal standard. For maximum sensitivity, a continuos-flow(CF-) FAB MS by selected-ion monitoring(SIM) with devised sample introduction system, has been developed to quantiate thromboxane $B_2$ in biological sample. Instrumental parameters affecting sensitivity, reproducibility has been studied. The method has been optimized with respect to the eluent, 0.75% glycerol(in EtOH v/v) and flow rate of $3.7{\mu}l/min.$ Under the condition, detection limits were below 10pg in SIM mode and a good linear relationship between dose and response was achieved.