http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박영도(Youngdo Park),최홍석(Hongseok Choi) 한국트라이볼로지학회 2005 한국트라이볼로지학회 학술대회 Vol.2005 No.11
Friction and wear behavior are important due to the reliability of mechanical parts. In this paper, we studied tribological characteristics of the sliding parts which are constituted piston and cylinder of the hermatic compressor using the falex tester. We prepared test specimens which are nitrocarburized mild steel and cast iron, relatively. Nitrocarburized specimen is machined from the surface for removing brittle compound layer. Moreover, we researched the wear performance of manganese phosphate film applied to the both specimens. The test results showed that diffusion layer of the nitrocarburized mild steel with proper hardness is good wear performance at the mating material. Also, we could know the manganese phosphate film makes lower the friction coefficient and protects the substrate.
전산유체해석을 통한 오일 화로에서의 불안정성과 고유모드 해석에 관한 연구
김도현(Dohyun Kim),박영도(Youngdo Park),유동현(Donghyun You),허강열(Kang Y. Huh) 한국연소학회 2013 KOSCOSYMPOSIUM논문집 Vol.2013 No.12
One of the major problems of design and operating furnace is that the vibration due to thermoacoustic instabilities. This study analyze thermoacoustic instabilities in oil furnace using LES and predicts shear layer oscillation frequency. In terms of analysis of thermoacoustic instabilities, the Rayleigh criterion is applied to predict instabilities. And the flame transfer function(FTF) illustrated by the "n-τ" model is obtained by LES. The results from the analysis show good agreement compared with the furnace resonance problem case.
GTAW 펄스 용접 조건에 따른 타이타늄 정밀관의 용입, 변색 및 굽힘특성
민성환,안성용,박지태,박영도,강남현,Min, Seonghwan,An, Sungyong,Park, Jitae,Park, Youngdo,Kang, Namhyun 대한용접접합학회 2014 대한용접·접합학회지 Vol.32 No.6
The purpose of the study is to produce a mechanically improved weld and minimum variation of color through comparing unpulsed and pulsed GTAW (Gas Tungsten Arc Welding) for pure titanium (CP grade7) tube. Pulsed GTAW using 60 A peak current and 20 A background current (1:9) achieved the wider window of welding conditions having part and full penetration without burn-through than the case of unpulsed GTAW. Moreover, the pulsed welding reduced a discoloration on the back bead of the weld and the size of microstructures (basket weave and serrated ${\alpha}$). That is because the pulsed welding has it's a low heat input and severe weld flow induced from electric current variation. Furthermore, the pulsed welding improved the bending property of the welded Ti tube. The enhanced bending property for the pulsed GTAW was due to the insignificant discoloration on the weld surface with maintaining the metal polish.
2020 개정 성인 문해 중학 국정교과서 개발에 관한 연구
권우진(Ujin Kwon),박영도(Youngdo Park) 학습자중심교과교육학회 2021 학습자중심교과교육연구 Vol.21 No.18
목적 본 연구에서는 2019년부터 2020년도에 개정된 성인 문해 중학 국정교과서의 개정 현황과 집필 특성을 구체적으로 논의하였다. 현재로서는 성인문해교육 국정교과서 개발 과정에 대하여 구체적으로 논의된 연구가 절대적으로 부족한 상황이다. 이에 본 연구를 통하여 문해교육 교과서가 지향하는 방향, 교과서 개정을 통하여 체계성을 더 높인 점 등을 밝히고, 중학과정 성인문해 교과서 개발 과정의 전모를 이해함으로서 교과서를 지도하거나 활용하고, 연계된 교육 자료를 개발하는 데에 도움이 되고자 하였다. 방법 이를 위하여 문해교과서의 필요성, 교과서 개발의 의의, 관련 고시 점검, 학령기 중학 교과서와의 차이점, 초등 성인문해 교육과정과 중학 성인문해 교육과정의 연계성 문제 등을 점검하면서 개정 성인문해 중학교과서 개정의 현황을 구체적으로 논의하였다. 결과 논의를 통하여 학습 적령기를 벗어난 성인 학습자의 문해 학습 자료 개발의 필요성을 밝히고, 2019-2020 성인 문해 중학 교과서 개정의 타당성을 설명하였다. 이전 교과서와의 차이점, 학령기 중학 교과서와의 차이점, 이번 개정 과정에서 중요하게 고려된 점 등을 명시화하였다. 결론 이번에 개정된 교과서는 ‘문해’에 대한 시대적 요구에 부응하고 생활 문해를 강화하는 교육부의 새로운 고시에 따른 것임을 밝혔다. 그리고 초등과정과 중학과정의 난이도 격차를 해소하고 연계성과 학습의 실용성을 더욱 높이기 위하여 노력하였음을 확인하였다. Objectives The purposes of this study were to discuss in detail the background and characteristics of the adult literacy middle school national textbooks revised from 2019 to 2020. Methods For this purpose, the necessity of literacy textbooks and the significance of textbook development were discussed. In addition, related examinations were reviewed and the differences between school-age middle school textbooks and adult literacy textbooks were reviewed. In addition, it checked whether the elementary adult literacy curriculum and the secondary adult literacy curriculum are well connected. Results Through various discussions, the necessity of developing textbooks for adult learners who have passed the age of learning and the reason why the revision of the 2019-2020 adult literacy middle school textbook was inevitable was explained. It revealed differences from previous textbooks, differences between school-age middle school textbooks and adult literacy middle school textbooks, and important considerations in this revision process. Conclusions It was clarified that the revised textbook responded to the changing demands of the times for ‘literacy’ and that it was in accordance with a new notice from the Ministry of Education, which strengthens literacy in daily life. In addition, it was confirmed that the gap between elementary and secondary courses was resolved and the practicality of learning was further enhanced.
시추공 영상자료와 카이제곱 검정을 이용한 절리 방향성의 수직적 변화양상에 관한 정량적 평가
김기석(Kiseog Kim),박영도(Youngdo Park),박연준(Yeonjun Park) 한국암반공학회 2008 터널과지하공간 Vol.18 No.3
이 연구에서는 시추공 분석 작업을 통해 획득된 암반절리 방향성이 심도에 따라 변화하는 양상의 확인을 위해 피어슨 카이제곱 통계검정이 실시되었다.대상 암반은 모암이 화강암질 편마암인 두 지역으로서,이와 같은 엽리가 발달하지 않은 괴상의 암상 선정은, 엽리가 존재하는 암석의 경우 절리 방향성이 엽리에 의해 영향을 받고 엽리의 방향은 습곡 등의 지질작용에 의해 심도에 따라 다를 수가 있기 때문이다. 암반절리들의 방향파악을 위해 시추공 영상이 이용되었다.획득된 방향자료를 천부구간과 심부구간의 자료로 분류한 후21영역으로 구성된 분할망에 각각 투영 후,분류표를 작성하여 통계검정을 실시하였으며,분석결과 두 지역중 한 지역의 자료는 비동질로 나타났다. 이러한 결과는 터널과 같은 지하구조물의 설계를 위한 암반공학적으로 중요한 절리면의 방향성에 대한 조사시 원위치 조사가 바람직함을 시사한다. We have carried out Pearson-type chi-square tests on the orientation data of joints from different depths in order to estimate the homogeneity of joint orientations obtained from a borehole. The orientation data of joints were collected from two non-foliated massive rocks of granitic gneisses in South Korea since orientations of joints in folded metamorphic rocks, for example, are controlled by foliation and also changes as the orientations of foliation change by folding. Borehole images were used for the analysis of the orientations of individual joints. The orientation data were subdivided into the upper level data and lower level data. The data from these two levels are plotted on the patch net consisting of 21 orientation patches. Then, the two patterns on the patch net were analyzed using a contingency table. From the chi-square test on the data collected from two sites, we found that some data sets show statistically meaningful differences in orientations of joints. Since joints are one of the important parameters in determining the physical properties of rock masses, in situ investigation of joints are desirable in the geotechnical investigation and also in design of subsurface structures (e.g. tunnels and underground storages).