Inter‑diffusion Based Analytical Model for Growth Kinetics of IMC Layers at Roll Bonded Cu/Al Interface During Annealing Process

Fu‑an Hua,Hong‑wu Song,Tao Sun,Jian‑ping Li 대한금속·재료학회 2020 METALS AND MATERIALS International Vol.26 No.3

A model based on inter-diffusion theory was established to predict growth kinetics of the intermetallic compounds (IMCs)formed in roll bonded Al/Cu sheets during annealing process. The model can give good prediction of both IMC layers growthkinetics and element concentration distribution at the interface of roll bonded Cu/Al sheets with different thickness underdifferent annealing conditions with certain roll reduction range. It is revealed that the calculated results of the proposedmodel are depended on the inter-diffusion coefficient of each components, which could be related to the interface bondingstate, i.e., bonding methods or rolling reductions for roll bonding. And there was big difference in inter-diffusion coefficientof Al and Cu matrix under different bonding state, while the inter-diffusion coefficient of IMCs changed slightly.

Unusual Motion Detection for Vision-Based Driver Assistance

Fu, Li-Hua,Wu, Wei-Dong,Zhang, Yu,Klette, Reinhard Korean Institute of Intelligent Systems 2015 INTERNATIONAL JOURNAL of FUZZY LOGIC and INTELLIGE Vol.15 No.1

For a vision-based driver assistance system, unusual motion detection is one of the important means of preventing accidents. In this paper, we propose a real-time unusual-motion-detection model, which contains two stages: salient region detection and unusual motion detection. In the salient-region-detection stage, we present an improved temporal attention model. In the unusual-motion-detection stage, three kinds of factors, the speed, the motion direction, and the distance, are extracted for detecting unusual motion. A series of experimental results demonstrates the proposed method and shows the feasibility of the proposed model.

Application of Biodegradable Microcrystalline Cellulose to Improve the Crystallization Behavior of Isotactic Polybutene-1

Fu-hua Lin,Bo Wang,Shuang-dan Mao,Xiang-yang Li,Yu-ying Zhao,Ying-Hui Wei 한국고분자학회 2021 폴리머 Vol.45 No.5

The microcrystalline cellulose (MCC) was used for inducing crystallization of the isotactic polybutene-1 (iPB) and the maleic anhydride grafted polybutene-1 (MAPB) was used as a compatibilizer. The crystallization behavior of the composite demonstrated that the addition of MCC could significantly accelerate the crystallization rate of iPB and the addition of MAPB could improve the compatibility between MCC and iPB. Moreover, the properties of the composites with MAPB were better than those without MAPB. The crystal transformation had been completed after storage for 5 days and the form I was formed after storage for 3 days which was faster than pure iPB. The non-isothermal crystallization kinetics data of the composites indicated that the modified Avrami equation could describe the non-isothermal crystallization process of the iPB/MCC composite and the t1/2 of the composites was shortened for 24.32% and 40.27% which indicated that MCC could promote the crystallization of iPB.

Detection of gas-solid flow faults of a circulating fluidized bed using pressure fluctuations in wind caps

Hua-wei Jiang,Jian-qiang Gao,Hong-wei Chen,Jun-fu Lu,Fu-mao Wang,Yang Wang,Zhen-xin Wu 한국화학공학회 2016 Korean Journal of Chemical Engineering Vol.33 No.7

Wind cap partial blockages and agglomeration are two of the most common gas-solid flow faults that occur under the actual operations of circulating fluidized bed boilers. Using the method of measuring pressure fluctuations, for the characterization of fluid dynamics in fluidized beds, has a great advantage, due to its flexible adaptation to any operating conditions to monitor fluidization. This paper presents research into the use of measuring and analyzing pressure fluctuations in wind caps, for the analysis of the gas-solid fluidization characteristics in a fluidized bed with wind cap partial blockages or agglomeration fault. Partial blockages in a wind cap near feeding side and partial blockages in another wind cap near recycling side as well as agglomeration of different extents were simulated in a cold circulating fluidized bed. Pressure fluctuations in the inlets of several wind caps were measured at different primary air velocities under different fault conditions. They were then analyzed with the methods of statistical average, standard deviation, wavelet analysis and homogeneous index. Based on the calculated characteristic parameters, the effects of gas-solid flow faults on the gas-solid fluidization characteristics were analyzed. Results showed that variations of characteristic parameters of pressure fluctuations were related to variations of the gas-solid flow condition, which were caused by wind cap partial blockages or agglomerations. It is shown that the proposed method is practical.

HCV-Specific Interleukin-21+CD4+ T Cells Responses Associated with Viral Control through the Modulation of HCV-Specific CD8+ T Cells Function in Chronic Hepatitis C Patients

Guo-Hua Feng,Fu-Sheng Wang,Ji-Yuan Zhang,Qing-Lei Zeng,Lei Jin,Junliang Fu,Bin Yang,Ying Sun,Tianjun Jiang,Xiangsheng Xu,Zheng Zhang,Jinhong Yuan,Liyuan Wu 한국분자세포생물학회 2013 Molecules and cells Vol.36 No.4

Interleukin-21 (IL-21)+CD4+ T cells are involved in the immune response against hepatitis B virus (HBV) by secreting IL-21. However, the role of IL-21+CD4+ T cells in the immune response against chronic hepatitis C (CHC) virus infection is poorly understood. This study aimed to investigate the role of IL-21+CD4+ T cells in CHC patients and the potential mechanisms. The study subjects in-cluded nineteen CHC patients who were grouped by viral load (low, < 106 RNA copies/ml, n = 8; high, > 106 RNA copies/ml, n = 11). The peripheral frequency of HCV-specific IL-21+CD4+ T cells was higher in the low viral load group and was negatively correlated with the serum HCV RNA viral load in all CHC patients. Meanwhile, IL-21+ cells accumulated in the liver in the low viral load group. In vitro, IL-21 treatment increased the expression of proliferation markers and cytolytic molecules on HCV-specific CD8+ T cells. In summary, these findings suggest that HCV-specific IL-21+CD4+ T cells might contribute to HCV control by rescuing HCV-specific CD8+ T cells in CHC patients.

Unusual Motion Detection for Vision-Based Driver Assistance

Li-hua Fu,Wei-dong Wu,Yu Zhang,Reinhard Klette 한국지능시스템학회 2015 INTERNATIONAL JOURNAL of FUZZY LOGIC and INTELLIGE Vol.15 No.1

For a vision-based driver assistance system, unusual motion detection is one of the important means of preventing accidents. In this paper, we propose a real-time unusual-motion-detection model, which contains two stages: salient region detection and unusual motion detection. In the salient-region-detection stage, we present an improved temporal attention model. In the unusual-motion-detection stage, three kinds of factors, the speed, the motion direction, and the distance, are extracted for detecting unusual motion. A series of experimental results demonstrates the proposed method and shows the feasibility of the proposed model.

Fundamental Study on Electrostatic Atomization of Biofuel/Water Emulsion

( Chien-hua Fu ),( Osamu Imamura ),( Kazuhiro Akihama ),( Hiroshi Yamasaki ) 한국액체미립화학회 2017 한국액체미립화학회 학술강연회 논문집 Vol.2017 No.-

This paper reports the experimental investigation of electrostatic atomization of BDF/water emulsion. Biofuel, such as Bio Diesel Fuel (BDF), is expected as the alternate fuel because of its carbon-neutral characteristics. In the process of making the biofuels, biofuels include water and the separation energy cost is relatively high. From this viewpoint, it is expected that the water in the biofuel is utilized in a positive manner. Biofuel and water mixture usually have large electric conductivity in comparison with hydrocarbons and it is possible to control of atomization using the electrostatic energy. In addition, if the droplets and spray are charged, the spray shape and flame pattern could be controlled to enhance the combustion and to reduce the heat loss to the wall. From this background, the paper mainly is focused on the electrostatic atomization of the BDF/water mixture. For the comparison, n-hexadecane is used as a reference fuel. The mixture fraction of water is the parameter of the fuel. To keep the stable mixture, surface active agent was added in the tested fuels. The viscosity of some tested fuel was high and the characteristics of non-Newtonian viscosity were researched prior to atomization experiments. The thin capillary to inject the fuel and wire netting over the capillary are used as electrodes and direct current voltages are applied to the electrodes. The fuel is pushed by the pressurized nitrogen and injected to the air through the capillary. As the results, fraction of water affects the onset of mode change, such as dripping, spindle, cone-jet etc. Droplets diameters and droplets velocity were measured from the video images and the electric charge distribution was discussed to understand the electrostatic atomization.

Intensity-modulated Radiotherapy Combined with Endocrine Therapy for Intermediate and Advanced Prostate Cancer: Long-term Outcome of Chinese Patients

Luo, Hua-Chun,Cheng, Hui-Hua,Lin, Gui-Shan,Fu, Zhi-Chao,Li, Dong-Shi Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.8

Aim: The aim of this study was to evaluate acute adverse events and efficacy of three-dimensional intensitymodulated radiotherapy (IMRT) combined with endocrine therapy for intermediate and advanced prostate cancer. Methods: Sixty-seven patients were treated with three-dimensional IMRT combined with maximum androgen blockade. The correlation between radiation-induced rectal injury and clinical factors was further analyzed. Results: After treatment, 21 patients had complete remission (CR), 37 had partial remission (PR), and nine had stable disease (SD), with an overall response rate of 86.5%. The follow-up period ranged from 12.5 to 99.6 months. Thirty-nine patients had a follow-up time of ${\geq}$ five years. In this group, three-year and five-year overall survival rates were 89% and 89.5%, respectively; three-year and five-year progression-free survival rates were 72% and 63%. In univariate analyses, gross tumor volume was found to be prognostic for survival ($X^2$ = 5.70, P = 0.037). Rates of leucopenia and anemia were 91.1% and 89.5%, respectively. Two patients developed acute liver injury, and a majority of patients developed acute radiation proctitis and cystitis, mainly grade 1/2. Tumor volume before treatment was the only prognostic factor influencing the severity of acute radiation proctitis (P < 0.05). Conclusions: IMRT combined with endocrine therapy demonstrated promising efficacy and was well tolerated in patients with intermediate and advanced prostate cancer.

Genetic Linkage of Genes for a Thermo-sensitive Genic Male Sterility in Maize: The genetic analysis of an TGMS Line Qiong-6ms in maize

Zhi Yuan Fu,Hui Ling Xie,Jian Sheng Li,Yan Min Hu,Zong Hua Liu,Zhong You He,Ji Hua Tang 한국유전학회 2008 Genes & Genomics Vol.30 No.6

Thermo-sensitive genic male sterile (TGMS) lines can provide new options for hybrid seed production using "two-line" system. A set of F2 and BC1 populations derived from the cross between Qiong-6ms and Dan958 were employed to analyze the inheritance of a TGMS line Qiong-6ms and map the TGMS genes in maize. The results demonstrated that the sterility of Qiong-6ms was governed by two duplicative recessive genes, named tms1 and tms2. The gene tms1 was mapped to chromosome 5 linked with the SSR markers umc1355, umc2302 and umc1784 at a distance of 3.0 cM, 1.3 cM and 0.9 cM respectively; while tms2 was localized on chromosome 3, linked with SSR markers bnlg1605 (0.5 cM) and umc2050 (4.2 cM). These markers, which are tightly linked with the tms1 and tms2 genes, will be helpful for marker assisted selection of TGMS lines in maize.

Evaluation of Computer-Assisted Quantitative Volumetric Analysis for Pre-Operative Resectability Assessment of Huge Hepatocellular Carcinoma

Tang, Jian-Hua,Yan, Fu-Hua,Zhou, Mei-Ling,Xu, Peng-Ju,Zhou, Jian,Fan, Jia Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.5

Purpose: Hepatic resection is arguably the preferred treatment for huge hepatocellular carcinoma (H-HCC). Estimating the remnant liver volume is therefore essential. This study aimed to evaluate the feasibility of using computer-assisted volumetric analysis for this purpose. Methods: The study involved 40 patients with H-HCC. Laboratory examinations were conducted, and a contrast CT-scan revealed that 30 cases out of the participating 40 had single-lesion tumors. The remaining 10 had less than three satellite tumors. With the consensus of the team, two physicians conducted computer-assisted 3D segmentation of the liver, tumor, and vessels in each case. Volume was automatically computed from each segmented/labeled anatomical field. To estimate the resection volume, virtual lobectomy was applied to the main tumor. A margin greater than 1 cm was applied to the satellite tumors. Resectability was predicted by computing a ratio of functional liver resection (R) as (Vresected-Vtumor)/(Vtotal-Vtumor) x 100%, applying a threshold of 50% and 60% for cirrhotic and non-cirrhotic cases, respectively. This estimation was then compared with surgical findings. Results: Out of the 22 patients who had undergone hepatectomies, only one had an R that exceeded the threshold. Among the remaining 18 patients with non-resectable H-HCC, 12 had Rs that exceeded the specified ratio and the remaining 6 had Rs that were < 50%. Four of the patients who had Rs less than 50% underwent incomplete surgery due to operative findings of more extensive satellite tumors, vascular invasion, or metastasis. The other two cases did not undergo surgery because of the high risk involved in removing the tumor. Overall, the ratio of functional liver resection for estimating resectability correlated well with the other surgical findings. Conclusion: Efficient pre-operative resectability assessment of H-HCC using computer-assisted volumetric analysis is feasible.