磻溪 柳馨遠의 商業振興論

元裕漢 弘益大學校 1983 弘大論叢 Vol.15 No.1

The commerce was one of the factors that faciliated the change of the traditional society of Yi Dynasty following the Japanese invasion in the 1590's. Therefore, the commercial system of the latter Yi Dynasty society cannot be overlooked in the study of the historical development of Yi society from a traditional or medieval structure to a near-modern one. The prevailing commercial theory of given era is the measure of the economic and financial development achieved in that era. From this point of view, the present writer has long cherished a desire to make a comparative study of commercial theories advanced by the four scholars of the Silhak(實學: Practical Learning School)... Yu Hyong-Won(柳馨遠, 1622-1673), Yi Ik(李瀷 1681-1763), Pak Ji-Won(朴趾源, 1737-1805), and Chong Yak-Yong(丁若鏞, 1762-1836),... in an attempt to throw light on the development of commercial theory in the latter half of the Yi Dynasty. The present paper is a partial realization of that desire, and the writer will deal here with some aspects of the development of commerce in the 17th century Yi Dynasty society on the basis of a study of Pan-gye's commercial theory. A collection of Pan-gye's political, economic and social essays, titled Pan-gye Surok(磻溪隨錄), was the chief reference of this study. Pan-gye valued commerce as one of the factors of nation economy. Therefore, Pangye suggested some reform measure for the commercial promotion of those days in his commercial theory. His reform measure for the commercial promotion can be summerized as follows; First, Pan-gye insisted not only to exempt taxes all of the poor merchants, but to distribute land to them, Second, the proposed that all of the Gong-jang(空場), as a periodical market in the country should be abolished by the government. Also he said that establishment of new Gong-jang should be prevented. Third, Pan-gye proposed that stores, as a standing maket be set up not only in the capital city but also in other areas of the country to promote commercial activities. Fourth, he recommended that all the government-run inns and other boarding houses should receive their fees in coin to promote money circulation and commercial activities. The above commercial theory of Pan-gye was accepted by Yi Ik, Pak Ji-Won and Chong Yak-Yong, the practical learning scholars of the latter Yi Dynasty.

자금재조달위험이 경영자 이익예측에 미치는 영향

유일한(Yu, Il-han),신상훈(Shin, Sang-hoon),유승원(Yoo, Seung-weon) 한국국제회계학회 2017 국제회계연구 Vol.0 No.72

본 논문에서는 자금재조달 위험이 경영자 이익예측에 미치는 영향에 대하여 연구하였다. 구체적으로 2004년부터 2014년까지 유가증권 상장기업의 경영자이익예측정보를 이용하여 자금재조달 위험이 경영자 이익예측의 편의에 미치는 영향에 대하여 분석하였다. 연구결과 첫째, 자금재조달 위험이 경영자 이익예측의 낙관성에 영향을 미치는 것으로 나타났다. 자본시장을 통한 자금재조달을 앞둔 경영자는 자본비용의 감소를 위해 기업의 미래성과를 낙관적으로 조망함으로써 긍정적인 시장의 전망을 유도할 유인이 있는 것으로 보인다. 둘째, 현금 보유비율이 낮은 기업일수록 경영자가 이익예측을 낙관적으로 할 가능성이 더 큰 것으로 나타났다. 자금재조달을 앞두고 충분한 현금을 보유하고 있는 회사의 경우 그렇지 않은 회사에 비해 자금재조달 시에 발생 가능한 여러 위험에 보다 유연하게 대응할 수 있다. 따라서 현금 보유비율이 높은 기업의 경우 경영자들에게 낙관적 이익예측을 통해 시장의 긍정적인 반응을 유도할 유인이 줄어드는 것이다. 이는 현금 보유비율이 높이는 것이 자금재조달 위험을 낮추는 방편 중 하나가 될 수 있다는 선행연구(Jarrad Harford 2014)와도 일관된 결과이다. 본 연구는 자금재조달 위험이 기업 영업에 중요한 논제임에 비해 국내 연구가 미진한 현 상황에서 자금재조달 위험이 경영자의 이익조정 뿐만 아니라 이익예측 관련 공시 정보에도 영향을 미칠 수 있음을 입증하였다는 점에서 의의가 있다. 또한 자금재조달 위험에 따른 경영자들의 이익예측 편의는 경영자들의 기회주의적 면모를 재조명한 것으로 볼 수도 있다. 나아가 본 논문은 현금보유 수준에 따라 경영자 이익 예측 성향이 달라질 수 있음을 입증하며 자금 대여자들의 의사결정에 필요한 시사점을 제공하리라 생각한다. In this paper, we investigate the effect of fund re-financing risk on managerial earnings forecast. Specifically, from 2004 to 2014, we analyzed the effects of the risk of refinancing of funds on the convenience of managerial earnings forecasts using information on managerial earnings forecasts of listed companies. The results of this study are as follows: First, the risk of refinancing affects the optimism of managerial earnings forecast. Management seems to have an incentive to induce a positive market outlook by optimizing the future performance of the company in order to reduce capital costs. Second, the lower the cash holding ratio, the more likely the manager is likely to be optimistic about earnings forecasts. Companies that have sufficient cash ahead of their refinancing can respond more flexibly to the risks that may arise when refinancing funds compared to non-cash companies. Therefore, for firms with high cash holdings, the incentive to induce positive responses to the market through optimistic earnings forecasts is reduced. This is consistent with Jarrad Harford (2014), which suggests that increasing cash holdings can be one of the ways to lower the risk of refinancing. This study has proved that the risk of refinancing is influential not only on managers" profit adjustment but also on profit forecasting information in the current situation where domestic research is insufficient. In addition, managers" profit forecasting convenience due to the risk of refinancing of funds can be seen as a reexamination of opportunistic aspects of management. In addition, this paper proves that the propensity to predict earnings will vary according to the level of cash holdings and will provide implications for women"s decision making.

호텔산업에서 공급사슬관리(SCM)를 통한 물류생산성 증진에 관한 실증연구

한한수,김흥유,임재욱 한국생산성학회 2002 生産性論集 Vol.16 No.3

Recently, Hotels re faced with competitions form other highly upgraded calering business and the increased lobor costs. As one of the methods to solve these difficalties. Stratgic supply could be considered for a hotel business. Actually, SCM(Supply Chain Management) is a theory of a general administion. In recent, a lots of companies over the world have implemented SCM in their supply management and have been succed. Thus, this study is to consider about the possibility if SCM could be used in the hotel business. The survey is enhanced with the staffs who is charge of the purchasing of 60 hotels and analyzed by SPSS 10.0 and AMOS 4.0. This study is only concerned to material supply. But, in the hotel work, it could be also important for service supplies such as order information processing.

生産函數에 있어서의 技術要因에 대한 數理的 考察

柳漢佑 啓明大學校 産業經營硏究所 1982 經營經濟 Vol.14 No.1

Technical progress plays a critical role in the economic development in both advanced and developing countries. The purpose of this thesis is to measure its contribution to economic growth in relevant to production function. This thesis mainly used Cobb-Douglos production function. This thesis'contents are follow. 1. The mechanism of technical progress and its operational process to economic growth. 2. The type of production function and the role of technical progress in the measurement of contribution to economic growth. 3. The measurement of technical progress. There are two ways in solving the facing technical problems in developing countries. First, developing countries develop their technology themselves. Second, they obtain technologies from advanced countries. But the former is more important than the latter. Fina11y, in future developing countries have to take a serious view of technology themselves in order to succeed in the development of their economy.

대량의 각혈로 사망한 장티푸스 1예

한상우,유진홍,권순석,김성훈,박지찬,홍은정,최경성,박용완,장준희,안지원,박유경,강지영,박상미,신완식 대한감염학회 2004 감염과 화학요법 Vol.36 No.5

We experienced a 25 year-old male patient with typhoid fever complicated with massive hemoptysis. Pulmonary complication in typhoid fever is very rare and to our knowledge, there has been no report of hemoptysis as a main cause of death with this disease. We herein report a rare case of typhoid fever.

완전탈구된 치아의 지연 재석

한유리,최형준,이제호,최병재 大韓小兒齒科學會 2002 大韓小兒齒科學會誌 Vol.29 No.4

완전탈구된 치아의 치료법은 재식술을 들 수 있는데, 이는 치조와에서 이탈된 치아를 가능한 빠른 시간 내에 재식립하는 술식이다. 일반적으로 재식술의 성공여부는 치수와 치주인대 손상의 정도, 치아상실 시부터 치조와 내로 재식될 때까지의 경과시간, 탈구된 치아의 보관 상태, 치근의 발육 정도 등에 좌우된다. 그 중 치아상실 시부터 재식까지의 경과시간이 특히 중요한데, 일반적으로 30분 이내에 재식을 시행한 경우에는 90%이상의 성공률을 보인 반면 30분에서 90분 사이에서는 43%, 90분 이상 경과 시에는 7%의 성공률을 보인다고 알려져 있다. 본 증례는 완전탈구 후 오랜 시간이 지연되어 재식을 시행하였으나 치근유착을 통해 비교적 양호한 임상적 결과를 얻었다. 이러한 치료로 결국은 치아의 손실이 일어날지라도, 이것은 환자 및 보호자의 사고에 따른 충격을 감소시켜주고, 자체로 공간 유지장치로서의 기능을 할 수 있으며, 발치에 따른 치조골의 흡수를 늦추는 한편, 적극적인 보철치료를 위한 시간을 벌어줄 수 있을 것으로 사료된다. Replantation may be treatment choice for a completely avulsed tooth caused by traumatic injury. The outcome of replantation depends on the following factors: minimal damage to pulp and periodontal membrane the length of time the avulsed tooth was out of the mouth, how the tooth was stored the level of root formation, etc. The time from the act of avulsion of the tooth to the actual replantation is especially important. Generally, when replanted within 30 minutes, more than 90% of cases succeed but when the time is between 30 to 90minutes 43% and greater than 90 minutes 7%. This is a case of a replanted tooth with relatively good prognois by ankylosis though there was a great time lapse since the tooth was avulsed. Though such treatment lead to loss of the tooth in case of children or adolescents this treatment is meaningful because it may earn time until any definitive therapy functionally stimulate the alveolar bone to retain its hight for a better prognosis for future treatment and act as space maintainer

렌즈의 자동초점 구동을 위한 리니어 초음파 모터

김유민, 이한주, 오진헌, 임기조 충북대학교 컴퓨터정보통신연구소 2012 컴퓨터정보통신연구 Vol.20 No.1

In this paper, a novel type ultrasonic linear motor is proposed. The proposed motor consists of a ring type stator and a mover. They have spirals on their inner and outer surface, respectively. Along the spiral, a mover is travelled by a travelling extensional vibration mode of a ring type stator. Hence, a linear up-and-down motion is possible. Through the experimental results, we can verify the applicability regarding the autofocus lens driver. keywords : Ultrasonic linear motor, Autofocusing driver, ring type stator

미니 임플란트 직경에 따른 피로파절강도의 비교 연구

허유리,손미경,김희중,최한철,정재헌 大韓齒科補綴學會 2012 대한치과보철학회지 Vol.50 No.3

Purpose: This study was conducted to obtain difference in fracture strength according to the diameter of one-body O-ring-type of mini implant fixture, to determine the resistance of mini implant to masticatory pressure, and to examine whether overdenture using O-ring type mini implant is clinically usable to maxillary and mandibular edentulous patients. Materials and methods: For this study, 13 mm long one body O-ring-type mini implants of different diameters (2.0 mm, 2.5 mm and 3.0 mm) (Dentis, Daegu, Korea) were prepared, 5 for each diameter. The sample was placed at 30 from the horizontal surface on the universal testing machine, and off-axis loading was applied until permanent deformation occurred and the load was taken as maximum compressive strength. The mean value of the 5 samples was calculated, and the compressive strength of implant fixture was compared according to diameter. In addition, we prepared 3 samples for each diameter, and applied loading equal to 80%, 60% and 40% of the compressive strength until fracture occurred. Then, we measured the cycle number on fracture and analyzed fatigue fracture for each diameter. Additionally, we measured the cycle number on fracture that occurred when a load of 43 N, which is the average masticatory force of complete denture, was applied. The difference on compressive strength between each group was tested statistically using one-way ANOVA test. Results: Compressive strength according to the diameter of mini implant was 101.5 ± 14.6 N, 149 ± 6.1 N and 276.0 ± 13.4 N, respectively, for diameters 2.0 mm, 2.5 mm and 3.0 mm. In the results of fatigue fracture test at 43 N, fracture did not occur until 2×106 cycles at diameter 2.0 mm, and until 5×106 cycles at 2.5 mm and 3.0 mm. Conclusion: Compressive strength increased significantly with increasing diameter of mini implant. In the results of fatigue fracture test conducted under the average masticatory force of complete denture, fracture did not occur at any of the three diameters. All of the three diameters are usable for supporting overdenture in maxillary and mandibular edentulous patients, but considering that the highest masticatory force of complete denture is 157 N, caution should be used in case diameter 2.0 mm or 2.5 mm is used. 연구 목적: 일체형의 o-ring type 미니 임플란트 고정체의 직경에 따른 파절강도의 차이를 비교하고자 한다. 연구 재료 및 방법: 길이 13 mm의 one body o-ring type의 미니 임플란트(Dentis, Daegu, Korea)를 직경2.0, 2.5, 3.0 mm 각각 5개씩 준비하였다. Instron universal testing machine 에 수직면에서 30도 각도로 샘플을 위치시키고 off-axis loading을 가하여 영구변형이 일어난 하중 값을 파절강도로 하고 5개의 시편의 평균을 구하여 각 직경에 따른 임플란트의 고정체의 파절강도를 비교하였다. 또한, 각 직경마다 3개의 시편을 준비하고 동적하중 피로 시험기를 이용하여, 파절이 발생할 때까지 파절강도의 80%, 60%, 40%의 loading 을 가하여 파절되는 cycle수를 측정하여 각 직경의 피로 파절을 분석하였다. 추가적으로 총의치의 평균 저작력인 43 N의 하중을 가하여 파절되는 cycle 수를 측정하였다. 각 군간의 차이를 검증하기 위해서 일원분산분석(one-way ANOVA test)을 시행하였고, 통계처리는 SPSS ver.12 (SPSS Inc. Chicago, IL, USA) 을 이용하여 실시하였다. 결과: 직경 3.0 mm 의 미니 임플란트는 평균 276.0 ± 13.4 N의 압축력을 받았을 때 영구 변형이 일어났고 직경 2.5 mm 미니 임플란트가 149.0 ± 6.1 N, 2.0 mm 미니 임플란트가 101.5 ± 14.6 N일 때 영구 변형이 일어났다. 각 군간의 파절강도에는 유의한 차이가 있었다(P<.001). 총의치의 평균 저작력 하중에서 실시한 피로 파절 실험 결과, 세직경 모두 5×106 cycle까지 파절이 일어나지 않았다. 결론: 미니 임플란트의 정적 하중 하에서 최대 압축강도는 직경이 증가할수록 유의적으로 증가하였다. 최대 압축강도는 세 직경 모두 총의치의 평균 저작력 보다는 크나 최대 교합력보다는 직경 3.0 mm에서만 크게 나타났다. 총의치의 평균 저작력 하중에서 실시한 피로 파절 실험 결과, 세 직경 모두 파절이 일어나지 않았다.

기도이물에 관한 임상적 고찰

한찬수,김태정,김일호,김유재,김천숙,안기량 순천향의학연구소 1996 Journal of Soonchunhyang Medical Science Vol.2 No.2

Aspiration of a foreign body in the airway is common cause of sudden obstructive breathing, crouping cough, hoarseness, and wheezing. Especially that caused serious problem in case of the young children. A past history of foreign body aspiration is itself an indication for bronchoscopic examination of the airway, because some children with aspirated foreign bodies are without symptoms and chest X-ray films may not show abnormalities. So the anesthesiologist should take a notice of removing foreign body in the anesthetic procedure. The author have experienced 36 cases removal of foreign bodies in the airway under general anesthesia from July, 1982 to January, 1996 in Chunan Hospital, College of Medicine, Soonchunhyang University. The results were as follows 1) Among the 36 cases, 25 cases(69.7%) were under the age of 5. The ratio of male and female was 1.8 : 1. 2) In duration of lodgement, there was most frequent within one day in 15 cases(41.7%) and the longest duration was 20 days. 3) The most common symptom, sign and auscultation finding were cough 19 cases(52.8%). chest retractions 7 cases(19.4%) and decreased breathing sound 20 cases(55.6%) 4) Abnormalities in the chest X-ray were found in 15 cases(41.7%) among 36 cases. 5) Vegetable foreign bodies, expecially peanut were the most common airway foreign body(28.7%), followed by plastic foreign body(14.4%) and mucous plug(11.3%). 6) The foreign body involved the right bronchus 16 cases(45.7), left bronchus 10 cases(28.6%), trachea 5 cases(14.3%), and larynx 4 cases(11.4%). 7) Foreign body induced complications occurred in 9 cases(25.0%); pneumonia 8 cases and pneumomediastinum 1 case, and all of postoperative complication was pneumonia(25.0%). 8) 34 foreign objects(94.4%) were removed by endoscopy but tracheostomy was required in two patients.

政治經濟學의 限界槪念에 관한 考察

柳漢佑 啓明大學校 産業經營硏究所 1982 經營經濟 Vol.14 No.1

The purpose of this article is to study the features and roles of the marginal concept in political economics, and to suggest one of the methods of political ecnomics. The marginal concept of economics serves for an adhesive agent between the marginal field and the proper field of economics. The proper field of economics is the field of theories which are the economic behavior analysis and the economic structure analysis based upon the rationality of economic means. But we must know there is the broad marginal field peripheral to economic theoretical sphere, that is, the field on economic philosophy, on economic ethics, and on economic thought presumed in an economic theory. so I extract the marginal concept in a remarkable economic work, which condenses the marginal field into the proper field of the economics. The marginal field of A. Smith's economics is natural freedom, and the proper field of his economics is An Inquiry into the Nature and Causes of the Wealth of Nations, And his economic marginal concept which condensed his marginal field into the theoretical area is natural price. The features of natural price are standardness, competiveness, and fairness. The marginal field of A.Marshall's economics is civic freedom, and the proper field of his ecnomics is an organic growth theory. The marginal concept used in his work, Priciples of Economics, is standard of life. the standard of life, in contrast with the standard of comfort, means the level of expenditure for desire for excellence. The quality of desires of human beings sublimes gradually from the desire for mouth to the desire for variety, to the desire for distinction, and to the desire for excellence. So the economic excellenct activities of laborer and enterpriser drive the organic growth of national economy.