http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
소형 경량의 특성을 만족하는 ZigBee MAC 프로토콜 개발
한창만 ( Chang-man Han ),최정훈 ( Jeong-hun Choi ) 한국정보처리학회 2005 한국정보처리학회 학술대회논문집 Vol.12 No.1
지금까지 무선 통신 기술은 높은 데이터 처리량을 가진 통신에 대하여 집중 개발되었으나, 낮은 처리량과 적은 비용, 낮은 전력소모의 요구사항을 가진 소형 경량의 무선 통신 분야의 기술개발은 활발하지 못했다. 현존하는 무선 통신 기술들을 낮은 처리율과 낮은 가격, 낮은 전력소모의 요구사항에 적용하기에는 필요이상의 성능과 비용이 들어가며, 특히 많은 전력을 소모하는 문제점이 발생한다. 이러한 문제점을 해결하기 위해 소형 경량의 무선 통신 기술인 ZigBee가 생겨나게 되었다. 본 논문에서는 현존하는 무선 통신 기술과 ZigBee 기술을 비교분석하여 ZigBee 기술의 필요성과 장단점을 제시하고, ZigBee의 핵심 기술 중 하나인 IEEE 802.15.4 MAC(Medium Access Control) 프로토콜 개발결과를 기술한다.
LR-WPAN MAC 프로토콜을 기반으로한 무선 센서 네트워크 구현
한창만 ( Chang-man Han ),최정훈 ( Jeong-hun Choi ) 한국정보처리학회 2004 한국정보처리학회 학술대회논문집 Vol.11 No.2
유비쿼터스 환경에서 동작할 수 있는 무선 센서 네트워크 기술에 대한 요구가 증가되고 있다. 그러나 기존 무선 통신 기술을 무선 센서 네트워크에 적용하기에는 고비용 센서, 상호 호환성 부족, 많은 전력 소모 등의 문제점이 발생한다. 본 논문에서는 최근 LR-WPAN(Low Rate-Wireless Personal area network)을 위한 국제 표준으로 정해진 IEEE 802.15.4 표준안의 핵심 기술인 MAC(Medium Access Control) 프로토콜을 개발하여, 이를 기반으로 한 무선 센서 네트워크를 구축하여 응용 가능성을 살펴 보았다.
박주현(Park Ju-Hyun),한창만(Han Chang-Man),최정훈(Choi Jeong-Hun) 한국방송·미디어공학회 2005 한국방송공학회 학술발표대회 논문집 Vol.2005 No.-
방송의 디지털화는 고품질 A/V 서비스 뿐만 아니라 데이터 방송과 같은 새로운 서비스를 제공한다. 지상파 및 케이블 방송에서는 A/V, 데이터 정보와 함께 서비스 제공을 위해 필요한 프로그램 관련 정보를 제공하는 방송 정보를 검증하기 위해 PSIP 분석기를 사용한다. 그러나 현재의 PSIP 분석기는 고가의 하드웨어장비가 대부분으로 설치 및 사용이 어렵고, 방송 매체에 종속적이며, 제약사항이 많아 관련 연구에 많은 어려움을 주고 있다. 이와 같은 문제를 해결하기 위해서는 설치 및 사용이 편리하고, 매체 비종속적이며, 기능의 확장 및 다양한 응용성을 가지는 소프트웨어기반 분석기가 요구되고 있다. 또한 매체별로 존재하는 PSIP 분석기 구매에 대한 비용 부담이 커지면서 다양한 매체를 동시에 지원할 수 있는 통합형 분석기가 요구되고 있다. 본 논문에서는 하드웨어 기반의 PSIP 분석기가 가지고 있는 기존의 문제점을 해결하고, 지상파 및 케이블 방송 매체의 구분 없이 방송 정보를 실시간으로 분석 및 검증할 수 있는 소프트웨어 기반의 통합형 PSIP 분석기의 개발에 관하여 기술한다.
열충격 사이클에 따른 SnAgCu 솔더별 솔더 접합부의 신뢰성 및 계면반응
오철민 ( Chul Min Oh ),박노창 ( No Chang Park ),한창운 ( Chang Woon Han ),방만수 ( Man Soo Bang ),홍원식 ( Won Sik Hong ) 대한금속·재료학회 2009 대한금속·재료학회지 Vol.47 No.8
Pb-free solder has recently been used in electronics in efforts to meet environmental regulations, and a number of Pb-free solder alloy choices beyond the near-eutectic SnAgCu solder are now available. With increased demand for thin and portable electronics, the high cost of alloys containing significant amounts of silver and their poor mechanical shock performance have spurred the development of low Ag SnAgCu solder, which provides improved mechanical performance at a reasonable cost. Although low Ag SnAgCu solder exhibits significantly higher fracture resistance under high-strain rates, little thermal fatigue data exist for this solder. Therefore, it is necessary to investigate thermal fatigue reliability of low Ag SnAgCu solder under variation of thermal stress in order to allow its implementation in electronic products with high reliability requirements. In this study, the reliability of Sn0.3Ag0.7Cu(SAC0307), a low Ag solder alloy, is discussed and compared with that of Sn3Ag0.5Cu(SAC305). Three sample types and six samples size are evaluated. Mechanical properties and microstructure of the solder joint are investigated under thermal shock cycles. It was observed that the mechanical strength of SAC0307 dropped slightly with thermal cycling relative to that of SAC305. This reveals that the failure mode of SAC0307 is different from that SAC305 under this critical condition.
이만상,김중래,한창열 한국수산학회 1981 한국수산과학회지 Vol.14 No.1
As one of the fundamental studies for the breeding of marine algae, this paper deals with the effects of plant hormone on the growth of microscopic filamentous gametophyte of undaria pinnatifida. The results obtained are summarized as follows: (1) All zoospores were settled on slide glass, germinated and developed into gametophytes, without the growth of germination tubes when treated with 0.1 mg/ℓ of 2.4-D, or 0.1, 1.0 or 5.0 mg/ℓ of keinetin (2) The best growth effect in total average was observed at 0.1 mg/ℓ of Keinetin, when the growth-rate was 248.9% in contrast with control, and was followed by 1.0 mg/ℓ of IAA (243.3%), and 0.05 mg/ℓ of 2.4-D (205.6%) (3) It was certain that the growth-effect by each plant hormone had some differences between male and female gametophytes. IAA was very effective in the growth of male gametophytes but Keinetin in that of females. Especially in females, the efficiency of Keinetin was recorded best at 239.0% at 5.0 mg/ℓ and 222.0% at 0.1 mg/ℓ. On the other hand, it was 195.1% in its best at 0.5 mg/ℓ of IAA, and 146.6% was recorded best 2.4-D at 0.05 mg/ℓ.
해조의 육종을 위한 기초적 연구 3 . 김 엽체에 미치는 식물호르몬의 생장효과
이만상,김중래,한창열,조영원 한국수산학회 1981 한국수산과학회지 Vol.14 No.2
김葉體의 生長에 미치는 植物호르몬의 영향을 調査하기 위해서 Gibberellin, IAA, Kinetin, NAA 및 2.4-D 等을 濃度別로 희석한 培地에서 김葉片을 32日間 培養하고 또 2次的으로 Kinetin의 濃度別培地에서 水溫을 5℃와 10℃로 區分하여 18日間 培養하였다. 그 結果를 要約하면 다음과 같다. (1) Gibberellin은 10.0㎎/ℓ濃度에서, 其他는 모두 5.0㎎/ℓ 濃度의 培地에서 各各 最高生長效果가 나타났다. 乾重量으로 본 效率値는 Kinetin이 312.5%(葉面積 : 345.3%)로 으뜸이며 2.4-D는 287.5%(236.1%), Gibberellin 247.9(241.9)%, IAA, 166.7(147.6)%, NAA 141.7(167.7)%의 順이였다. (2) 特히 Kinetin 5.0㎎/ℓ濃度에서 培養된 葉片은 그 色彩가 진한 黑褐色으로 가장 좋았으며 細胞마다 생기있는 큰 色素體가 뚜렷하고 健全하여 뛰어난 效果가 나타났으나 餘他는 색채가 淡褐色 또는 黃綠褐色으로 변하고 死細胞가 많이 發見되었으며 生細胞도 原形質이 萎縮되었거나 큰 液胞가 생겨 매우 不健全하였다. (3) 低溫(5℃)과 高溫(10℃)에서의 Kinetin의 生長效率은 低濃度에서는 大差가 없었으나, 5.0㎎/ℓ의 高濃度에서는 低溫이 366.7%, 高溫이 318.8%로서 48%의 效率差가 생겼으며 細胞의 健全性은 1次實驗때와 마찬가지로 모두 좋았다. (4) 最高生長效果가 나타난 Kinetin 5.0㎎/ℓ 濃度에서는 葉片의 緣邊에 지름 25.0∼27.5μ 정도의 異常大型細胞가 많이 發見되었으며 그 중에는 한 細胞內에 數個의 包素體가 있는 것이 觀察되었다. 두께도 41.0∼42.0μ으로 比較的 두꺼웠다. (5) Kinetin 1.0 ㎎/ℓ 濃度의 培地에서 培養된 葉片中에는 造精器을 形成하고 있는 세포群이 觀察되었다. As one of the fundamental studies for the breeding of marine algae, the effects of several plant hormones (IAA, Gibberellin, 2.4-D, NAA, Kinetin) on the growth of Porphyra-fronds, P. tenera Kjell. form tamatsuensis Miura, were investigated from January 21 to February 21 1981. The fronds used for the experiment were dissected out at 25㎟ size, and cultured in modified Provasoli's ESP medium supplemented with various concentrations of each plant growth regulators. The culture was kept under constant water temperature of 5℃ in 14 hrs. photoperiod and illuminated with 2,400 lux by fluorescent light. Based on the results of first experiment, the culture of fronds for the secondary experiment was carried out at 5℃ and 10℃ in medium containing various levels of Kinetin from April 6 to 24, and compared the growth of two groups at each concentrations with each other. The results obtained are summarized as follows: (1) The best growth efficiencies were observed at 5.0㎎/ℓ of each plant hormones except Gibberellin. Among them, the highest growth-rate was 312.5%(345.3% in frond size) in contrast with control at 5.0㎎/ℓ of Kinetin, and was followed by 287.5%(236.1%) in 2.4-D, 166.7%(147.6%) in IAA and 141.7%(167.7%) in NAA, but that in Gibberellin was 247.9% (241.9%) at 10.0㎎/ℓ. (2) Especially, the fronds cultured at 5.0㎎/ℓ of Kinetin were deep black-brown in colour, and had vivid, healthy chloroplasts in their all cells. On the contrary, the fronds cultured in other media were discoloured to light black-brown or green-brown, and almost all cells were vacuolated or shrunk gradually into death.
금형면 자동 다듬질 장치의 D/B 구축을 위한 실험적 연구
조성만,안유민,조남규,한창수,박균명 韓國工作機械學會 2000 한국생산제조학회지 Vol.9 No.2
Although polishing process take 30∼50% of whole process of manufacturing die and mold, it has not been fully automat-ed yet. Considering current trend of manufacturing, it is necessary to study on polishing automation. To accomplish automation, reliable database must be developed. For developing it, polishing mechanism should be defined and a general empirical formula that can be applied widely should be created. In this paper, it is found that polishing process must be separated into 2 process such as removing cusp and getting fine surface process and the polishing parameter which is com-posed of major machining parameters and normalization of data can be applied efficiently in making reliable database.